Medal for military distinction of the Russian Federation Ministry of Defense awarded. For military distinction medal benefits

In accordance with Article 7 of the Federal Law of January 12, 1995 No. 5-FZ "On Veterans" (Collected Legislation of the Russian Federation, 1995, No. 3, Art. 168; 2016, No. 52 (Part V), Art. 7510) , with subparagraph 27 of paragraph 10 of the Regulation on the Ministry of Defense of the Russian Federation, approved by Decree of the President of the Russian Federation dated August 16, 2004 No. 1082 (Collected Legislation of the Russian Federation, 2004, No. 34, Art. 3538; 2017, No. 34, Art. 5264) , I order:

1. Establish departmental insignia:

medal "For military distinction";

medal "For military valor";

medal "For clearance";

medal "For strengthening the military community";

medal "For Distinction in Military Service";

medal "Mikhail Kalashnikov";

medal "To the participant of the military operation in Syria".

2. To approve:

The procedure for awarding departmental insignia of the Ministry of Defense of the Russian Federation (to this order);

Regulations on departmental insignia of the Ministry of Defense of the Russian Federation (to this order).

3. To establish that the departmental insignia of the Ministry of Defense of the Russian Federation, giving the right to confer the title of "Labor Veteran", are:

medal "For Distinction in Military Service" I degree;

medal "For Distinction in Military Service" II degree;

medal "For Labor Valor";

medal "Mikhail Kalashnikov".

4. To recognize as invalid the orders of the Minister of Defense of the Russian Federation:

dated January 22, 2008 No. 30 "On departmental insignia of the Ministry of Defense of the Russian Federation" (registered with the Ministry of Justice of the Russian Federation on March 31, 2008, registration No. 11429);

dated July 9, 2009 No. 704 "On Amendments to the Orders of the Minister of Defense of the Russian Federation on Military Service" (registered with the Ministry of Justice of the Russian Federation on November 20, 2009, registration No. 15274).

PERFORMANCE

to be awarded with the departmental insignia

Ministry of Defense of the Russian Federation

_________

1. Surname, name, patronymic (if any) ____

2. Military rank (class rank) ________________________________________

(for military personnel) (federal

government civil servants)

Personal number______________________

(for military personnel)

3. Position, place of service _______________________________________________

_________________________________________________________________________

(by the actual open name of the military unit, organization)

4. Gender _____________________ 5. Date of birth _________________________

(day month Year)

6. Place of birth _______________________________________________________

(republic, territory, region, district, city, district,

settlement, village, village)

7. What state awards and departmental insignia

Of the Ministry of Defense of the Russian Federation awarded and year of award

_________________________________________________________________________

8. Residence address _______________________________________________

9. Length of service (seniority) ______________________________________,

(calendar years, months)

including in the Armed Forces ____________________________

10. The contract for the passage of military service (service) is concluded ______________

_________________________________________________________________________

(start and end dates of the contract)

11. Characteristics indicating the differences (merits) submitted to

awarding

_________________________________________________________________________

Downside

Candidacy _________________________________________________________

reviewed at the attestation commission (officers' meeting, meeting

labor collective, trade union meeting) of the military unit

(Protocol No. ________ dated "____" ______________ 20 ____).

________________________________________________________________

(position)

________________________________________________________________

"____" _____________ 20 ____

CONCLUSION OF SENIOR SUPERVISORS

________________________________________________________________

(position)

________________________________________________________________

(military rank (if any), signature, initials of name, surname)

"___" _______________ 20 ___

________________________________________________________________

(position)

________________________________________________________________

(military rank (if any), signature, initials of name, surname)

"____" _______________ 20 ___

The data in paragraphs 1-10 by the Order of the Minister of Defense of the Russian

correspond to the data of the Federation documents dated "___" _____________

personal accounting personal 20___ N____

awarded by ______________________

___________________________ (name of the departmental mark

(position, military rank, distinction)

(in the presence of)

___________________________

LIST
foreign citizens nominated for award with the departmental insignia of the Ministry of Defense of the Russian Federation

_________________________________________________________________________

(name of the departmental insignia)

________________________________________________________________

(position)

________________________________________________________________

(military rank (if any), signature, initials of name, surname)

on the number of servicemen nominated for the medal

"For distinction in military service"

Submitted to the award

Military personnel

(quantity)

(type of the Armed Forces, military district, Northern Fleet, branch of the Armed

Forces, the central body of military command)

medal I degree - people,

medal of the II degree - people,

medal III degree - people

Among those presented for the award:

officers - people,

of them senior officers - people,

warrant officers, warrant officers - people,

soldiers, sailors, - people

sergeants, foremen

Among the nominated for rewarding _________________ military personnel

(quantity)

female.

________________________________________________________________

(position)

________________________________________________________________

(military rank (if any), signature, initials of name, surname)

military personnel nominated for the medal

"For distinction in military service"

The draft order of the Minister of Defense of the Russian Federation on awarding

medal "For Distinction in Military Service" please include the following

military personnel ___________________________________________________________

(type of the Armed Forces, military district, Northern Fleet,

_________________________________________________________________________

branch of the Armed Forces, the central body of military command)

MEDAL "FOR EXCELLENCE IN MILITARY SERVICE"

I DEGREE

MEDAL "FOR EXCELLENCE IN MILITARY SERVICE"

II DEGREE

_____________________________________ - _________________,_______________

(surname, name, patronymic (if any) (military rank) (personal number)

MEDAL "FOR EXCELLENCE IN MILITARY SERVICE"

III DEGREE

_____________________________________ - _________________,_______________

(surname, name, patronymic (if any) (military rank) (personal number)

________________________________________________________________

(position)

________________________________________________________________

(military rank (if any), signature, initials of name, surname)

Recommended sample of the certificate form for the departmental insignia

PROTOCOL

delivery of departmental insignia

Ministry of Defense of the Russian Federation

_______________________ ____________________________________

(place of delivery) (date of delivery)

According to the order of the Minister of Defense of the Russian Federation from

"____" ___________ 20 ____ No. _______ by me, _________________________________

________________________________________________________________________,

(position, military rank (if any), surname and initials of the presenting

departmental insignia)

departmental insignia were awarded to those awarded:

_________________________________________________________________________

(name of the departmental insignia)

stock), personal number

(for military personnel)

_________________________________________________________________________

(name of the departmental insignia)

_____________________________________ ___________________________________

(surname, name, patronymic (if any) (position or military rank (if

stock), personal number

(for military personnel)

In total, under this protocol were awarded:

And certificates for them ____________ pieces;

And certificates for them _____________ pcs.

(name of the departmental mark (quantity)

_________________________________________________________________________

(position)

_________________________________________________________________________

(military rank (if any), signature, initials of name, surname)

"___" _____________ 20 ____

on the introduction of clarifications in the surnames, names, patronymics of the awarded

In preparation for the presentation of departmental insignia of the Ministry

defense of the Russian Federation, discrepancies with the correct

spelling of surnames, names, patronymics (if any) of the awarded:

in the order of the Minister of Defense of the Russian Federation from

"____" _____________ 20 ___ No. _____ about rewarding

_________________________________________________________________________

(name of the departmental insignia)

printed: should be:

(in the presence of)

in the order of the Minister of Defense of the Russian Federation

dated "____" _____________ 20____, No. _____ on rewarding

_________________________________________________________________________

(name of the departmental insignia)

printed: should be:

1.__________________________________ 1.______________________________;

(last name, first name, patronymic (if any) (last name, first name, patronymic

(in the presence of)

________________________________________________________________

(position)

________________________________________________________________

(military rank (if any), signature, initials of name, surname)

"_____" ________________ 20 ____

PROTOCOL

transfer of the departmental insignia of the Ministry of Defense

On the obverse of the medal: in the center - a two-line relief inscription "FOR BATTLE DIFFERENCES"; in the upper part - a relief image of an airplane and a helicopter, in the lower part - a relief image of a tank and an infantry fighting vehicle.

On the reverse side of the medal: in the upper part there is a relief one-color image of the emblem of the Ministry of Defense of the Russian Federation (a double-headed eagle topped with a crown with outstretched wings. In the eagle's right paw there is a sword, in the left - an oak wreath. On the eagle's chest there is a triangular shield with a rod , ascending to the crown. In the field of the shield there is a rider striking a dragon with a spear), under it there is a relief inscription in one line: "No. ________"; around the circle - a relief inscription: in the upper part - "MINISTRY OF DEFENSE", in the lower - "RUSSIAN FEDERATION".

The medal is connected with a lug and a ring to a pentagonal block covered with a silk moire ribbon 24 mm wide. On the right edge of the tape, an orange stripe 8 mm wide is bordered by two black stripes 2 mm wide, to the left - an orange stripe 8 mm wide is bordered by white (right) and black (left) stripes 2 mm wide.

______________________________

* Decree of the President of the Russian Federation of July 21, 2003 No. 821 "On the military heraldic sign - the emblem and flag of the Ministry of Defense of the Russian Federation" (Collected Legislation of the Russian Federation, 2003, No. 32, Art. 3169; 2004, No. 34, Art. 3538 ).

Drawing and description of the medal "For military valor"

The medal is made of gold-colored metal (for grade I) or silver-colored (for grade II) with enamel, has the shape of a circle with a diameter of 32 mm with a convex rim on both sides.

On the reverse side of the medal: in the upper part - a relief one-color image of the emblem of the Ministry of Defense of the Russian Federation, under it - a relief inscription in two lines: "FOR MILITARY VALOR"; around the circle - a relief inscription: in the upper part - "MINISTRY OF DEFENSE", in the lower - "RUSSIAN FEDERATION".

The medal is connected with a lug and a ring to a pentagonal block covered with a silk moire ribbon 24 mm wide. On the right edge of the ribbon, an orange stripe 8 mm wide is bordered by two black stripes 2 mm wide, to the left is a red stripe 12 mm wide, in the middle of which: a white stripe 2 mm wide - for a medal I degree and two white stripes 1 mm wide - for medal II degree.

______________________________

On the obverse of the medal there is a relief image of a soldier with a mine detector, an armored demining vehicle on the ground and a laurel branch under them.

On the reverse side of the medal: in the upper part - a relief one-color image of the emblem of the Ministry of Defense of the Russian Federation, under it - a relief inscription in two lines: "FOR MINING"; around the circle - a relief inscription: in the upper part - "MINISTRY OF DEFENSE", in the lower - "RUSSIAN FEDERATION".

The medal is made of gold-colored metal, has the shape of a circle with a diameter of 32 mm with a convex rim on both sides.

On the obverse of the medal, in the center, there is a relief image of a cartouche shield with an inscription in four lines: "FOR STRENGTHENING THE COMBAT COMMONWEALTH" on diagonally crossed swords, framed in the lower part by oak branches.

The medal is connected with a lug and a ring to a pentagonal block covered with a silk moire ribbon 24 mm wide. On the right edge of the ribbon, an orange stripe 8 mm wide is bordered by two black stripes 2 mm wide, on the left, a red stripe 4 mm wide is bordered along the edges by green and blue stripes 2 mm wide each.

The medal of the 1st degree is made of silver-colored metal, the 2nd degree is of gold-colored metal, the 3rd degree is of bronze-colored metal, it has the shape of a circle with a diameter of 32 mm with a convex rim on both sides.

On the obverse of the medal: in the center - a relief image of a shield with a Roman numeral in the center indicating the grade of the medal (I, II or III), on diagonally crossed swords, on the wings and an anchor, entwined with a rope; in the lower part in a circle - a relief inscription: "FOR EXCELLENCE IN THE MILITARY SERVICE".

On the reverse side of the medal, in the center, there is a relief one-color image of the emblem of the Ministry of Defense of the Russian Federation, along the circle there is a relief inscription: in the upper part - "MINISTRY OF DEFENSE", in the lower part - "RUSSIAN FEDERATION".

The medal is connected with a lug and a ring to a pentagonal block covered with a silk moire ribbon 24 mm wide. On the right edge of the ribbon, an orange stripe 8 mm wide is bordered by two black stripes 2 mm wide, to the left is a red stripe 12 mm wide, divided in the middle: a green stripe 2 mm wide - for a medal of the I degree, two green stripes 2 mm wide - for a medal of II degree , three green stripes 2 mm wide - for a medal of III degree.

The medal is made of bronze colored metal with enamel, it has the shape of a circle with a diameter of 32 mm with a convex rim on both sides.

On the obverse side of the medal in the center is a relief image of the waving standard of the Minister of Defense of the Russian Federation, framed by an oak wreath, in the lower part of which there is a shield.

On the reverse side of the medal: in the upper part - a relief one-color image of the emblem of the Ministry of Defense of the Russian Federation, under it - a relief inscription in two lines: "FOR LABOR VALUE"; around the circle - a relief inscription: in the upper part - "MINISTRY OF DEFENSE", in the lower - "RUSSIAN FEDERATION".

______________________________

* Decree of the President of the Russian Federation of March 13, 2000 No. 485 "On personal standards" (Collected Legislation of the Russian Federation, 2000, No. 12, Art. 1258; 2017, No. 40, Art. 5820).

The medal is made of silver-colored metal, has the shape of a circle with a diameter of 32 mm with a convex rim on both sides.

On the obverse of the medal: on the left - a relief image of the portrait of Lieutenant General M.T. Kalashnikov, on the right - a relief inscription in two lines: "MIKHAIL KALASHNIKOV", under the portrait - a relief image of an AK-47 assault rifle.

On the reverse side of the medal in the center there is a single-color relief image of the emblem of the Ministry of Defense of the Russian Federation, around the circle there is a relief inscription: in the upper part - "MINISTRY OF DEFENSE", in the lower part - "RUSSIAN FEDERATION".

The medal is made of gold-colored metal, has the shape of a circle with a diameter of 32 mm with a convex rim on both sides.

On the obverse of the medal: a relief image of military equipment (in the upper part - three fighters, in the lower - a rocket ship) on the contour of the borders of the Syrian Arab Republic.

On the reverse side of the medal: in the upper part - a relief one-color image of the emblem of the Ministry of Defense of the Russian Federation, under it - a relief inscription in four lines: "TO THE PARTICIPANT OF THE MILITARY OPERATION IN SYRIA"; around the circle - a relief inscription: in the upper part - "MINISTRY OF DEFENSE", in the lower - "RUSSIAN FEDERATION".

Document overview

Eight departmental insignia of the Russian Ministry of Defense were established. These are the medals "For military distinctions", "For military valor", "For demining", "For strengthening the military community", "For distinction in military service", "For labor valor", "Mikhail Kalashnikov", "For a participant in a military operation in Syria ".

The order of awarding has been determined.

The insignia that give the right to be awarded the title "Veteran of Labor" are listed. These are the medals "For Distinction in Military Service" I and II degrees, "For Labor Valor", "Mikhail Kalashnikov".

Previously issued orders of the Russian Ministry of Defense on these issues were declared invalid.

Medal "For military excellence" - the departmental insignia of the Ministry of Defense of the Russian Federation, established by order of the Minister of Defense of the Russian Federation No. 100 of March 31, 2003. On December 14, 2017, a new regulation on the medal was approved.

Rewarding rules

According to the regulation of 2017, the servicemen of the Armed Forces of the Russian Federation are awarded the medal "For military distinction":

for the distinction, courage and dedication shown during the performance of missions in combat conditions and during special operations in conditions associated with a risk to life;
for skillful, proactive and decisive actions that contributed to the successful fulfillment of combat missions;
for the successful leadership of the actions of subordinates in the performance of combat missions.

The medal may be awarded to servicemen of other troops, military formations and bodies where military service is envisaged, as well as servicemen of the armed forces of foreign states who assist in solving the tasks assigned to the Armed Forces of the Russian Federation.

The medal is awarded by order of the Minister of Defense of the Russian Federation. Re-awarding with a medal is possible. There is no posthumous award.

Wearing rules

The medal is worn on the left side of the chest and is located after the state awards of the Russian Federation and the USSR in front of other medals of the Ministry of Defense of the Russian Federation in accordance with the rules for wearing military uniforms.

Medal description

The medal is made of silver-colored metal, has the shape of a circle with a diameter of 32 mm with a convex rim on both sides. On the front side of the medal in the center there is a relief inscription in two lines: "FOR BATTLE DIFFERENCES"; in the upper part - relief images of an airplane and a helicopter; in the lower part - relief images of a tank and an infantry fighting vehicle. On the reverse side of the medal: in the upper part - a relief image of the emblem of the Ministry of Defense of the Russian Federation, under it - a relief inscription "No. ____"; in a circle there are relief inscriptions: in the upper part - "MINISTRY OF DEFENSE", in the lower part - "RUSSIAN FEDERATION".

The medal is connected with an eyelet and a ring to a pentagonal block covered with a silk moire ribbon 24 mm wide. On the right edge of the tape there is an orange stripe 8 mm wide, bordered on both sides by black stripes 2 mm wide, to the left - a white stripe 2 mm wide, an orange stripe 8 mm wide and a black stripe 2 mm wide.

Medal option until 2017

Until December 2017, there was no image of the emblem of the Ministry of Defense of the Russian Federation on the reverse side of the medal, the number sign was located in the center. On the ribbon, the right orange stripe was 10 mm wide and bordered by a black stripe only along the outer edge.

Image semantics

The elements of the medal symbolize:

the image of the main types of military equipment - the readiness of all servicemen of the Armed Forces of the Russian Federation to fulfill their military duty to defend the Fatherland;
the orange stripe of the medal ribbon bordered by a black stripe - the status of the medal as a departmental award of the Ministry of Defense of the Russian Federation;
the combination of white, orange and black ("St. George's") colors of the left edge of the medal ribbon is a manifestation of differences by military personnel directly in combat conditions.

Additional incentives for the awardees

Order of the Minister of Defense of the Russian Federation of October 9, 2014 No. 725 dsp established the rules for the payment of a monthly allowance for special achievements in service to servicemen of the Armed Forces of the Russian Federation performing military service under a contract. This order entered into force on November 14, 2014. Sub-clause 6 of clause 2 of these rules stipulates that when awarding the medal "For military distinction" a monthly supplement of 30% is paid. The premium is paid within one year from the date of the issuance of the order of the Minister of Defense of the Russian Federation on awarding this medal.

Jacket: - loose fit; - fastener central side, windproof strap, with buttons; - a yoke made of finishing fabric; -2 slit slant pockets with flap, with buttons at the bottom of the front; - on the sleeves, 1 slant patch pocket; - in the elbow area, reinforcing curly pads; - bottom of the sleeves with elastic; - the hood is double, with a visor, has a pull-down curtain for volume adjustment; - adjustable waist with drawstrings; Trousers: - loose fit; -2 side vertical pockets; - in the area of \u200b\u200bthe knees, on the back halves of the trousers along the seam of the seat - reinforcing pads; -2 side patch pockets with flap; -2 back patch pockets with curly buttons; - the cut of the details in the area of \u200b\u200bthe knees prevents them from stretching; - back halves under the knee are gathered with an elastic band; - elasticated belt; - bottom with elastic; - clip-on straps (braces); - belt loops; wearing - both in boots and outside. material: tent fabric; composition: 100% cotton; density: 270 g.; overlays: ripstop, oxford; cuffs: yes; sealing gum: yes; jacket / trousers pockets: yes / yes; additionally: a lightweight summer version; high strength of fabric and seams; How to wash a suit Gorka.

A semi-fitted dress in dark blue with a V-neck, decorated with a red silk scarf (included in the set). Fabric - gabardine. According to the order of the Ministry of Internal Affairs of Russia No. 575, chevrons are sewn onto the sleeves of the dress at a distance of 8 cm from the edge of the shoulder. A chevron is sewn onto the left sleeve, indicating belonging to the Ministry of Internal Affairs of Russia, and on the right sleeve, a chevron, indicating the service of a police / justice officer. May be completed with Velcro chevrons. The scarf to the dress is worn in a triangle folded in the form of a scarf, the narrow ends are tied together and tucked in from the back under the collar. The wide side is tucked in under the neckline of the dress. It is allowed to wear a summer dress without a headscarf in the office premises. The length of the dress along the bottom edge should be at knee level. The Police / Justice dress with short sleeves is part of the police uniform of the new sample. Example of material drawing:

The Gorka-3 suit is the most successful and widespread type of Gorka suit. Made of rip-stop material with a density of 270 grams. per 1 m2 of black color, structurally consists of a jacket and trousers. Used to protect the fighter from adverse weather conditions, all-season. The main feature of this suit is the fleece lining. The jacket has a deep hood with drawstrings, two welt side pockets covered with buttoned flaps, one inner pocket for documents and two pockets on the sleeves just below the shoulders. It should be noted that the fleece lining is removable, which increases the usability of the suit and allows it to be used in a wider temperature range. Shoulders, elbows, cuffs are reinforced with synthetic oxford 0 rip-stop fabric. Reinforcement on the elbows of the mountain-3 suit is made in the form of a Velcro pocket, equipped with rigid inserts. The sleeves are equipped with anti-dust cuffs and a hidden elastic band for adjusting the volume just above the wrist. The jacket is also equipped with an adjustable drawstring at the edge, fastens with buttons. Slide suit pants have six pockets. Two side slotted, two cargo overhead and two rear. The knees, bottom of the legs and other stressed places of the trousers are reinforced with a synthetic oxford 0 rip-stop fabric. The bottom of the legs is double, the so-called “boot” reinforced with a cuff that is worn over the boot and prevents dust, dirt and small stones from entering it. Just below the knee, the trousers have a fixing elastic band. It automatically adjusts the volume of the leg and prevents the fabric from sailing. The trousers are equipped with removable suspenders. Main features: removable fleece lining demi-season suit strong material inner pocket hood CHARACTERISTICS SUIT CHARACTERISTICS Material: ripstop Composition: 70/30 Density: 240 gr. Pads: Oxford 0 Cuffs: yes Sealing elastic: yes Jacket / trousers pockets: yes / yes Seasonality: demi-season Additionally: reinforced inserts, removable fleece lining, anthers on trousers, suspenders included

A semi-fitted dress in dark blue with a V-neck, decorated with a red silk scarf (included). Fabric - gabardine. According to the order of the Ministry of Internal Affairs of Russia No. 575, chevrons are sewn onto the sleeves of the dress at a distance of 8 cm from the edge of the shoulder. A chevron is sewn on the left sleeve, indicating belonging to the Ministry of Internal Affairs of Russia, and on the right - a chevron, indicating the service of a police / justice officer. Can be completed with Velcro chevrons. The scarf to the dress is worn in a triangle folded in the form of a scarf, the narrow ends are tied together and tucked in from the back under the collar. The wide side is tucked in under the neckline of the dress. It is allowed to wear a summer dress without a headscarf in the office premises. The length of the dress along the bottom edge should be at knee level. The Police / Justice dress with short sleeves is part of the new model of the police uniform. Example material drawing:

Fabric: Mirage-210, PE-67%, Chl-33% Summer suit consists of a jacket and trousers. Straight cut jacket. Stand collar. Central fastener with a detachable zipper closed with a strap on textile fasteners. Two chest patch pockets with flaps with textile fasteners. The pockets are located obliquely along the hand. Backrest with two vertical pleats for freedom of movement around the shoulder blades. Single suture sleeves. In the upper part of the sleeves, patch pockets with flaps on textile fasteners, with belt loops on the inside of the flaps. In the elbow area, reinforcement pads with an entrance for protectors with textile fasteners. At the bottom of the sleeves there are patch pockets for pens. On the bottom of the sleeves, cuffs with patches on textile fasteners for volume adjustment. Straight fit trousers. One-piece belt with seven belt loops. The volume of the belt is regulated by a cord with lugs. Button fastening. Two side trim pockets. On the side seams, two large patch pockets with three folds for volume. The upper part of the pockets is pulled together with an elastic cord with a lock. The entrances to the pockets, designed obliquely, are closed by flaps with textile fasteners. In the area of \u200b\u200bthe knees, reinforcement pads with an entrance for protectors with textile fasteners. At the bottom of the trousers, there are patch pockets with flaps on textile fasteners. The volume at the bottom of the trousers is adjustable with a tape. On the back halves of the trousers there are two welt pockets with flaps with a hidden fastener

Please note - in this model, fleece insulation is only in the jacket! Coloring: khaki Jacket: - free cut; - fastener central side, windproof strap, with buttons; - yoke made of finishing fabric; -2 slit slant pockets with flap, with buttons at the bottom of the front; - on the sleeves, 1 slant patch pocket; - in the elbow area, reinforcing curly pads; - bottom of the sleeves with elastic; - the hood is double, with a visor, has a pull-down curtain for volume adjustment; - adjustable waist with drawstrings; Trousers: - loose fit; -2 side vertical pockets; - in the knee area, on the back halves of the trousers along the seam of the seat - reinforcing pads; -2 side patch pockets with flap; -2 back patch pockets with curly buttons; - the cut of the details in the area of \u200b\u200bthe knees prevents them from stretching; - back halves under the knee are gathered with an elastic band; - elasticated belt; - bottom with elastic; - clip-on straps (braces); - belt loops; wearing - both in boots and outside. material: tent fabric; composition: 100% cotton; density: 270 g.; overlays: ripstop, oxford 0; cuffs: yes; sealing gum: yes; seasonality: demi-season; additionally: reinforced inserts, removable fleece lining, anthers on the trousers, suspenders included

Suit scout moss The scout suit is made in a very successful design of the demi-season uniform "smok" in the colors of the experimental camouflage A-TACS FG. The suit consists of a jacket and trousers. The jacket is long, below the waist. Equipped with a deep hood with adjustable drawstrings, it has four large cargo pockets closed with flaps on a large English button, which allows you to easily open the pocket in a hurry, with your hands in shooting gloves, and in other extreme conditions, when the time counts down by seconds. The elbows of the suit are reinforced with an additional layer of fabric, the sleeves are equipped with wide rubber bands. With buttons. The suit trousers have a loose fit, all loaded parts are reinforced with an additional layer of fabric. A wide rubber-fabric tape, a thin cord for additional tightening, and suspender loops are sewn into the belt. There are four pockets on the trousers. Two slotted, covered with valves on a large English button, two overhead cargo, in which additional ammunition can be carried. A wide cuff and so-called "brakes" made of elastic fabric are provided at the bottom of the legs, which prevent the legs from pulling up. color moss (A-TACS FG) Main features: color drawstring at the waist elastic bands on the pants carrying case for suspenders included CHARACTERISTICS SUIT CHARACTERISTICS Material: T / C Composition: 65 pe / 35 viscose Density: 160 gr. Cuffs: yes Sealing bands: no Pockets jacket / trousers: yes / yes Seasonality: all-weather Optional: carrying case

Consists of a jacket and trousers. Fabric - Rip-Stop, PE-67%, Chl-33%. Designed for officers of the internal affairs bodies with special police ranks, carrying out external duty. It is worn with a dark blue T-shirt and a dark blue cap. According to the order of the Ministry of Internal Affairs of Russia No. 575, the chevrons are sewn onto the sleeves of the suit at a distance of 8 cm from the edge of the shoulder. A chevron is sewn on the left sleeve, indicating belonging to the Ministry of Internal Affairs of Russia, and on the right sleeve, a chevron, indicating the service of a police officer. Can be completed with Velcro chevrons. Above the left pocket (shelf), at a distance of 10 mm, a patch "POLICE" (110x30 mm) is sewn, made in the form of a rectangle with a red edging, the inscription is made in white or silver. On the back, 10 mm higher than the red line on the back, a patch "POLICE" (275x85 mm) is sewn, made in the form of a rectangle with a red edging and an inscription in white or silver color. Officers with special police ranks, when serving in public places, wear badges on the jackets of a summer suit. The badges are pinned to the left breast pocket. The badge is placed in a detachable badge pocket, which is worn on the right side of the jacket of navy blue summer suits. The badge is a rectangular card containing the identification data of a police officer.

Women's demi-season raincoat is part of the uniform of police officers of a new sample. Cloak of a semi-adjacent silhouette, with a central inner secret fastener for five loops and buttons and additionally for an upper uniform button and a through-buttoned loop, on a warmed stitched lining. On the yokes in the shoulder seam area there are two belt loops and one non-slotted loop for attaching removable shoulder straps. Sleeves are set-in, two-seam. In the lower part of the middle seam of the sleeve, stitches are sewn in, fastened with a loop and a shaped button. Turn-down collar with detachable stand. The detachable belt is passed through the belt loops located in the side seams and fastens with a buckle with a tongue, the free end of which is threaded into the belt loop. On the right hem there is an inner welt pocket with a leaf. Jacket fabric (100% polyester) with rip-stop threads and water-repellent impregnation. The second layer is a membrane. Filling: Thinsulate 100 g / m2. Recommended temperature range: from + 10 ° С to -12 ° С. It is worn with a dark blue comforter or with a white comforter. It is allowed to wear a demi-season raincoat neatly folded with the front side out on the left hand. Demi-season raincoats are worn buttoned up with all the buttons. It is allowed to wear demi-season raincoats with an unbuttoned top button. Demi-season raincoats are worn with or without a removable insulation with a buckled belt. On this raincoat, removable shoulder straps in dark blue and stripes in dark blue are worn.

With innovative technologies and quality materials that provide maximum protection from rain and wind, you will be in constant comfort, which helps to reduce fatigue throughout the day. Features Protection against rain and wind Regulatory cut Upper material: Rip-stop Insulation: Thinsulate

The suit consists of a jacket and trousers. Jacket with central side zip fastening. Front with upper welt pockets with flaps and leaves fastened with textile fasteners and side welt pockets in a "frame" fastened with a "zipper" tape. The front and back of the jacket are lined. Turn-down collar with stand. Regular staff suit made of rip-stop fabric with Velcro. Back with a yoke. Sleeves are set-in, single-seam, with reinforcing pads in the elbow area, with stitched cuffs, fastened with a textile fastener - a slit with a puff. For fastening removable shoulder straps, belt loops are located in the area of \u200b\u200bshoulder seams, two continuous loops are swept perpendicular to the shoulder seam. On the bottom of the jacket there is a detachable belt, the volume of which is regulated by side sections with an elastic band. Straight trousers, with stitched arrows and side pockets along the front halves. Front closure of the trousers with zip fastening. There are darts on the back halves. On the right back half there is a welt pocket with a flap and a leaf, fastened with a textile fastener. Stitched belt, fastened with a loop and a button. To adjust the volume, the belt is pulled together with elastic tape in the area of \u200b\u200bthe side seams. Example material drawing: Additionally, you can purchase:

The Gorka suit produced by the PRIVAL trademark is made of fabric mixed with cotton. The traditional Gorka suit is made of cotton tent fabric, and in areas where increased reinforcement is required, a fabric mixed with cotton is placed, which is characterized by increased strength and wear resistance. This model is made entirely of fabric mixed with cotton, so it will last a long time even with intensive use. Also, this material is pleasant to wear, providing freedom and comfort in movement. The jacket and trousers are loose-fitting, which allows you to pry on additional layers of clothing. For a better fit, fit and to avoid "winding" in the wind, the suit has a system of ties based on a rubber-fabric tape on the sides of the jacket, on the sleeves, under the knees and at the bottom of the trousers. The jacket has 5 pockets, trousers 6. The valves of the pockets are triangular, which significantly reduces the bending of the extreme corners of the valve and clinging to ammunition and equipment. Trousers are equipped with comfortable suspenders. The combination of overlays with the main fabric of black color provides a breakdown of the silhouette of a person at distant distances.

No velcro under the chevrons. The size is indicated on the collar. You can use shoulder straps Worn out The belt is adjustable in size using side elastic bands 2 chest pockets Material: 65% Polyester 35% Viscose

Jacket with combined (stitched and removable) insulated lining, detachable insulated hood, detachable faux fur collar. The jacket is shortened, straight cut. Central fastener with two-lock detachable "zipper", closed with a windproof flap on the buttons. Turn-down collar with a patch fastener on a textile fastener. In the area of \u200b\u200bshoulder seams, shoulder straps are located. View all products by tag shoulder straps on buttons with removable false shoulder straps for attaching insignia. Shelves and back with yokes. Along the yoke line - red piping. Two chest pockets with flaps on buttons and Velcro textile fasteners. Two side pockets with flaps on buttons and Velcro textile fasteners. On sacking patch pockets welt pockets with zippered entrance. On the bottom of the jacket jacket View all products by tag jacket a detachable belt, the volume of which is regulated by the side sections with elastic tape stitched on a multi-needle special. machine with a chain stitch. Sleeves are set-in, two-seam. Zipped welt pocket on the right sleeve. A bandage with a reflective tape is sewn into the pocket, fastened with a Velcro textile fastener. On the bottom of the sleeves, stitched cuffs with elastic tape sewn on a multi-needle special. machine with a chain stitch. Stitched insulated lining with insulation "Fibertek-200" On the inside of the left shelf there is a pocket for a pistol (with a carabiner on a cord for attaching a pistol) and a patch pocket with a vertical entrance with a "zipper". Removable insulated hood fastens with a detachable zipper. The volume is adjustable at the back of the head and the front cutout. The chin part fastens with a Velcro textile fastener. Detachable collar made of artificial fur containing Kanekaron fiber (Made in Japan) fastens with a detachable zipper. A removable insulated lining (vest) made of insulation "Fibertek 150" is quilted on both sides with a lining fabric, fastened with a detachable zipper. On the removable insulation there is a patch pocket with a horizontal entrance with a zipper. Insulation Fibertek has a number of advantages over traditional fillers: - Perfectly retains its shape and restores it after washing. - Multiple washing and drying is allowed. - Provides greater heat shielding effect compared to other materials of similar thickness and density. - Moisture resistant. - Stable during long-term use. - Is an environmentally friendly and non-toxic insulation. - Practical in terms of price and quality.

Material: gabardine -Classic trousers with piping along the side seam. -The volume of the belt is regulated by the side sections with elastic tape. -On the belt -6 belt loops. -Two side pockets. -One welt pocket with a flap on the back half of the trousers. -Along the side seam - red piping Example of material pattern:

Border cap with green top, black band and red piping. The cap is completed with a cockade and a metallized filigree (or varnished) cord. The height of the crown is -7 cm. It is made within 3-5 working days.

Men's head scarf Serves to protect the head, face and neck from the sun, sand and cold Material: 67% cotton -33% polyester Size: 120 × 120 cm Arafatka (Shemag, Kufiya, Shemakh) came to us from the East, where this light, a voluminous headscarf made of natural cotton serves as a traditional men's headdress. Like most of the elements of traditional costume that have lasted for centuries, it is extremely functional. Arafatka is an excellent protection against heat, cold, wind, sandstorms and dust. The name Shemag or Shemakh, she received from the British military, who, appreciating all these qualities, wore it while serving in the Arab countries. Well, and the headscarf began to be called Arafat in Russia, thanks to Yasser Arafat, who did not leave TV screens during the Israeli-Palestinian conflict. Regardless of her past, Arafatka remains what she is - a large, lightweight shawl. For some it is just a fashionable accessory, but for tourists, hunters and travelers - a convenient multifunctional headdress, also known as a scarf, mask and bandana. The soft, breathable Keffiyeh fabric will shelter your head, face and neck from the scorching sun, wind, cold, dust and insects. In a difficult situation, Arafatka can be used as a bandage for an injured hand, splint or bandage.

Uniform skirt for employees of internal affairs bodies. Summer version made of lightweight gabardine fabric. It is part of the daily uniform of employees of the internal affairs bodies. According to order # 575, the length of the skirt along the bottom edge should be at knee level. Example material drawing:

The combat suit offered for purchase is an almost complete copy of the ACU suit that the US Army has been using since 2005. In a very short time, it has become so popular that it is used by both elite military units and amateurs of military sports games such as airsoft. The suit is made of high quality cotton / polyester / 35 fabric with a density of 210g. per 1m2, in the colors of the experimental camouflage A-TACS FG, which is used by various private military companies. The suit consists of a jacket and trousers. The jacket is fitted, so it is more convenient to wear it tucked into trousers with attached equipment. In the area of \u200b\u200bthe shoulder blades there is a special fold for greater hand mobility. The central zipper is double-sided, duplicated by a flap with Velcro fasteners, two slanting flat pockets on the chest are intended only for carrying documents, two patch pockets on the sleeves are used for small things necessary for a fighter. The left forearm has a pocket for three ballpoint pens. For the convenience of wearing body armor, the collar of the jacket is made of a stand-up so that the equipment does not rub the neck. It fastens with a textile fastener. It should be noted that, unlike the original, the infrared marker fasteners have been removed from the jacket, and the textile fasteners on the collar are softer and more comfortable. The sleeves of the jacket are fixed with a Velcro fastener. There are seven bindings on the jacket for information about the fighter's rank, blood type, etc. The reinforcements of the elbows are made in the form of a pocket, with the possibility of completing them with a rigid insert. Trousers of a free cut, with wide belt loops, additional tightening of the belt with a thin cord is provided. The fly of the trousers is fastened with buttons, on the sides of the waist there are belt loops for tightening, which is also absent in the original form. There are eight pockets in the trousers of the uniform. Two large cargo pockets are capable of accommodating additional ammunition if necessary, two small pockets on the calves are ideal for carrying a multi-tool and a dressing bag, access to them in a sitting position is easier than any other. All pockets on the trousers, except for the mortise pockets, are covered with flaps. Two side cut-in pockets are traditionally used for household items, and two rear pockets remain "in reserve". The loaded parts of the trousers are reinforced, in the front, on the knees, the use of a rigid insert is provided. The bottom of the legs is pulled with a thin braid. color A-TACS FG Main features: analogue of NATO suit removed IR Velcro label on the collar softer than the original soft fabric on trousers drawstring loops CHARACTERISTICS SUIT CHARACTERISTICS Material: mixing (lux) Composition: 70pe / 30 hb Density: 270 g. Cuffs: Velcro Sealing elastic bands: no Pockets jacket / trousers: slanting pockets on the chest Seasonality: all-season Additionally: a copy of the NATO suit

Winter OMON boots, in which high (24 cm) ankle boots are made of natural chrome leather 1.6 mm thick, with a flexible thermoplastic sole, equipped with a large embossed tread and insulation made of high-quality natural sheepskin - this is exactly the footwear that is needed by law enforcement officers , professional tourists and everyone who is fond of outdoor activities. The toe and heel of the boot are reinforced with thermoplastic material to maintain their shape. This model uses a lacing system, in the upper part of which there are two pairs of metal loops, allowing you to quickly take off and put on boots without taking the laces out of the loops. The blind valve prevents dirt, snow, sand and other foreign objects from entering the boot. This model is a godsend for people with a high rise of the foot. Upper: genuine chrome leather (1.4-1.6 mm). Lining: natural sheepskin. Sole: TPE (± 40 ° С), 2050. Sole attachment method: glue-stitched. Arch support: metal. Toe and heel: Reinforced with thermoplastic material. Sizes: 36-50. A blind valve protects the foot from environmental influences (dust, water, dirt). Hooks. Soft edging. Black color. Weight: 840 gr. Technical characteristics Army type boots (Ankle boots). Model Omon 905 Manufacturer BUTEX Country Belarus Upper material genuine chrome leather (1.4-1.6 mm) Lining material natural sheepskin Sole fastening glued and stitching Metal instep and back plate reinforced with thermoplastic material Sole material TEP (± 40 ° С), 2050 Available size range 36- 50 Shoe color black Valve type Blind valve Soft edging present Hooks present

All-season jacket for police officers. The jacket is elongated, straight cut with a combined (stitched and removable) insulated lining, a removable insulated hood, a removable collar made of faux fur. buttons with removable false straps for attaching insignia. In the area of \u200b\u200bthe shoulder girdle of the yoke, along the yoke line, a red piping is sewn in. Two chest patch pockets with flaps on buttons and Velcro textile fasteners. On the vertical side of the pocket there is a fold for volume. On the bottom of the side seams there are slits fastened with zippers. The back with a yoke, along the yoke line a red piping is sewn in. Sleeves are set-in two-seam. On the right sleeve there is a patch pocket with a vertical entrance with a zipper. A bandage with a reflective tape is sewn inside the pocket, fastened with a Velcro textile fastener. On the left shelf under the windproof flap there is an inner pocket for a pistol with a vertical entrance on a textile fastener. A cord with a carabiner for attaching a pistol is sewn inside the pocket. A lightweight insulated lining with insulation "Fibertek-200". On the left shelf on the lining there is a breast patch pocket with a vertical entrance with a "zipper". On the right and left shelves there are patch pockets with a horizontal entrance with a "zipper". Along the waistline on the lining there is a drawstring with an elastic perforated tape for volume adjustment. The free end of the tape fastens with a button. A removable insulated hood with a fleece lining fastens with a detachable zipper. The volume of the hood in the back of the head is regulated by a patch on the textile fastener. The volume along the front cutout is adjusted with a cord with clamps. The chin part of the hood fastens with a textile Velcro fastener. A removable faux fur collar with Kanekaron fiber made in Japan is fastened with a detachable zipper and loops and buttons on the collar. The collar fastens with a stitching with a textile fastener. A removable insulating lining with sleeves with knitted cuffs - wristbands is fastened on a detachable "zipper" of the loop and buttons along the shoulder seams and the bottom of the sleeves. On the right shelf there is a side patch pocket with a horizontal entry with a zipper. At the bottom there is a drawstring with a cord for adjusting the volume, at the ends of the cord there are clamps and tips. FIBERTEC INSULATION - Perfectly retains its shape and restores it after washing. - Multiple washing and drying is allowed. - Provides greater heat shielding effect compared to other materials of similar thickness and density. - Moisture resistant. - Stable during long-term use.

A comfortable VKBO military suit is used by the RF Armed Forces in the field. The balanced composition of the fabric provides high strength and ventilation performance. There are pockets for placing polypropylene protectors on the elbows and knees. CHARACTERISTICS For hot weather Statutory cut MATERIALS 65% polyester, 35% cotton

Winter boots Pilot with a low (18 cm) ankle boot and an elastic sole made of a polymer material with the properties of rubber (TEP) - perfect for outdoor activities, as work shoes and long walks. The top of this model is made of genuine chrome leather 1.6 mm thick, and natural sheepskin fur is used as a heater. The toe and heel of the boot are reinforced with a special thermoplastic material to maintain their shape. The outsole is equipped with a relief tread providing reliable traction on any surface. To prevent snow and foreign objects from entering the boot, the Pilot boots are equipped with a semi-blind valve. For greater reliability, the sole in this model is stitched around the perimeter, and the lower part of the boot is attached to the vamp with a metal rivet. BOOTS WITH HIGH BELLS Upper: genuine chrome leather (1.4-1.6 mm) Lining: genuine sheepskin. Sole: TPE (± 40 ° C), 3521. Sole attachment method: glue-stitched. Arch support: metal Toe and heel: reinforced with thermoplastic material. Sizes: 36-50. Semi-blind valve. Soft edging. Color: black Weight: 730 gr. Modifications: Model 180 artificial fur. Specifications Boots. Model Pilot 181 Manufacturer BUTEX Country Belarus Upper material genuine chrome leather (1.4-1.6 mm) Lining material natural sheepskin Sole fastening glued and stitching Metal instep and back plate reinforced with thermoplastic material Sole material TEP (± 40 ° С) 3521 Available size range 36-50 Shoe color black Flap type semi-blind flap Soft edging present

The size is indicated on the collar. No velcro under the chevrons. You can use shoulder straps Worn out The belt is adjustable in size using side elastic bands 2 chest pockets Material: 65% Polyester 35% Viscose

Casual suit of the RF Ministry of Defense servicemen. Men's jacket: zipped at the belt, with long sleeves, unlined. Turn-down collar with a stand and fixing the corners with buttons. The pockets are fastened with contact tape. Below are welt pockets "frame" with a zipper. An internal document pocket fastens with a button. Trousers with a stitched belt fastened with a button. Color: Blue, green, black. Size: 88-132 Size: 84-100 Height: 158-200 Fabric: Rip-stop Accessories: Reinforced Color: blue, green, black. Material: rip-stop.

The overalls for men are intended for pilots and technicians of civil and small aircraft. The jumpsuit fits well on the figure. The wear period of the product has been increased due to high-quality domestic materials, constructive solutions and many years of experience of specialists. The product is designed in accordance with GOST 12.4.100-80. Overalls with a central closure with a two-zipper; internal windproof valve; shoulder pads; there are ventilation holes in the armpits, inside the ventilation holes are closed with a mesh in the color of the fabric. The width of the jumpsuit along the waistline is adjusted with an elastic band (elastic band) on the contact tape (Velcro). Side seams with zippers; at the bottom of the overalls trousers there are “zippers” for wearing over shoes. Pockets for various purposes: patch pockets with an inclined entrance with "zippers" on the shelves, on the left sleeve - patch pocket with "zippers" with a flap fastened with a contact tape (Velcro); a pocket for pens with three compartments can be adjusted to it, lower patch pockets with “zippers”, on the right back half of the overalls there is a pocket for tools, fastened with a button; which is tuned to the gain detail. To fix the tools, a cord is provided, which is fixed on the pocket through the eyelet and the holder with a half ring. On the right shelf - the mating part of the contact tape (soft) for placing the flight chevron, on the left shelf - the mating part of the contact tape (soft) for placing the standard name chevron, a belt loop for the badge. Backrest with vertical pleats for freedom of movement. Single-suture set-in sleeves, adjustable at the bottom with a strap on the contact tape (Velcro). A mating part of the contact tape (soft) is adjusted over the pocket on the left sleeve to accommodate the chevron.

The Smok Winter Suit is completely removable fleece lining. The Smok Suit was first used by the British Special Operations Forces during the 1982 Falklands War. The design of the uniform turned out to be so successful that it was adopted for use in most of the actively fighting special forces. This version of the smok demi-season suit is made of high-quality polyester / cotton blend 70/30 with a density of 240 gr. for 1m2 colors moss. The suit consists of a jacket and trousers. The jacket is long, below the waist, and has eight pockets. Four cargo vests, one armband, two volume frontal ones with a zipper, which to some extent can replace an unloading vest, and one inner waterproof one for documents. Cargo and sleeve pockets are closed with flaps on a large English button, which allows you to easily open the pocket in a hurry, with your hands in shooting gloves, and in other extreme conditions. The elbows of the suit are reinforced with an additional layer of fabric, the sleeves are equipped with wide textile fasteners. The front zipper is doubled along the entire length with five English buttons that fix the windproof flap. Adjustable straps are provided in the waist and along the edge of the jacket for a tighter fit to the equipment and to the figure. The trousers are made loose enough not to interfere with the fighter, all weighted parts are reinforced with an additional layer of fabric. The belt has two additional drawstrings on the sides for a more precise fit. There are four pockets on the trousers. Two slotted, and two overhead cargo, covered with valves on a large English button, in which additional ammunition can be carried. At the bottom of the legs, there is a tightening that firmly fixes the trousers over the combat boots. color moss Main features: removable fleece lining zipper duplicated with buttons ties and cuffs comfortable tailoring adjustable hood CHARACTERISTICS SUIT CHARACTERISTICS Material: ripstop Composition: 70pe / 30xb Density: 240 gr. Cuffs: Velcro Sealing Elastics: Ties Jacket / Pants Pockets: Yes / Yes Seasonality: Winter Optional: Detachable fleece lining on jacket and pants

The police shirt is made of polyester-viscose fabric. Thanks to this fabric, the shirt will last longer, will not lose its original appearance even after numerous washes, and will not become electrified. CHARACTERISTICS For hot weather Statutory cut MATERIALS 65% polyethylene, 35% viscose

Lightweight UIS trousers provide comfort when working in hot weather. "Gabardine" material does not wrinkle, does not lose its shape during washing, does not fade. Ideal for daily wear. CHARACTERISTICS Statutory cut MATERIALS Gabardine (polyester 100%)

Police officer trousers for women are intended for use in the summer season. The model is made of fabric (gabardine) with good air permeability, does not deform during operation, is resistant to dirt, does not electrify and does not wrinkle. Formal trousers with a classic straight cut with red piping along the side seam. Stitched waistband, buttoned, adjustable with elastic band. Two side pockets. The trousers are fastened with a button, the codpiece - with a zipper. For optimal fit, pleats are laid in the front and darts on the back halves. Example material drawing:

Summer suit consists of a jacket and trousers. Straight cut jacket. Collar - stand, the volume is regulated by a stitch on the textile fastener. Central fastener with a detachable zipper closed with a strap on textile fasteners. Two chest patch pockets with flaps with textile fasteners. The pockets are located obliquely along the hand. Backrest with two vertical pleats for freedom of movement around the shoulder blades. Single suture sleeves. In the upper part of the sleeves, patch pockets with flaps on textile fasteners, with belt loops on the inside of the flaps. In the elbow area, reinforcement pads with an entrance for protectors with textile fasteners. At the bottom of the sleeves there are patch pockets for pens. On the bottom of the sleeves, cuffs with patches on textile fasteners for volume adjustment. Straight fit trousers. One-piece belt with seven belt loops. The volume of the belt is regulated by a cord with lugs. Button fastening. Two side trim pockets. On the side seams, two large patch pockets with three folds for volume. The upper part of the pockets is pulled together with an elastic cord with a lock. The entrances to the pockets, designed obliquely, are closed by flaps with textile fasteners. In the area of \u200b\u200bthe knees, reinforcement pads with an entrance for protectors with textile fasteners. At the bottom of the trousers, there are patch pockets with flaps on textile fasteners. The volume at the bottom of the trousers is adjustable with a tape. On the back halves of the trousers there are two welt pockets with flaps with a hidden fastener on the buttons. In the area of \u200b\u200b\\ u200b \\ u200bthe seat there is an overlay amplifier Fabric: Mirage-210, PE-67%, Chl-33%

The upper of this model of boots is made of special combined fabrics: vamp - from hydrophobic leather 1.8 mm thick; high (23 cm) ankle boots - made of durable nylon fabric with a density of 1000 D. The lining is made of moisture-wicking Cambrel fabric, which is not subject to abrasion and decay. The heel and toe of the boot are reinforced with thermoplastic material to increase durability and maintain shape. The rubber outsole with a large embossed tread is attached to the boot using an adhesive method. The upper construction of the heavy-duty high lacing system with five pairs of metal loops allows you to quickly take off and put on your shoes. The presence of a blind valve in this model prevents any foreign objects from entering the boot. This model is very reliable and practical, and therefore is extremely popular among law enforcement officers and people who are fond of active outdoor activities. BOOTS WITH HIGH BELLS Combined upper: hydrophobic leather (1.2-1.4 mm), “DRYWALK SYSTEM” (R) (JSC “RUSSIAN KOZHA”) + high-strength fabric from non-textured nylon thread 1680D. Lining: non-woven, abrasion-resistant and quick-drying, high density (150g / sq. M.). Sole: rubber of increased wear resistance (Italy), PANAMA. Sole attachment method: adhesive. Arch support: metal. Toe and heel: Reinforced with thermoplastic material. Sizes: 40-46. A blank valve protects the foot from environmental influences (dust, dirt). Speedy lacing. Soft edging. Black color. There is a shock-absorbing insert in the heel of the bunks. Weight: 720 gr. Specifications Lightweight Ankle Boots. Model Kalahari 1411 Manufacturer BUTEX Country Belarus Upper material hydrophobic leather (1.2-1.4 mm), "DRYWALK SYSTEM" ® (JSC "RUSSIAN KOZHA") + high-strength nylon fabric 1680D Lining material hygroscopic and wear-resistant fabric (150 g / m2) Sole fastening adhesive Arch support metal Toe cap and heel reinforced with thermoplastic material Outsole material rubber of increased wear resistance PANAMA, (Italy) Available size range 40-46 Shoe color black Lacing type high-speed lacing Flap type blind flap Soft edging is present There is a shock-absorbing insert in the heel of the toes

A winter jacket for the Army, Navy and Air Force reliably protects against wind and snow. Insulation perfectly retains heat, weighs little, does not deform, does not absorb moisture. The combination of membrane fabric and insulation provides protection against severe frost. CHARACTERISTICS Protection from cold Registered cut For military operations Hand wash only MATERIALS Rip-stop Membrane Insulation "Fibersoft"

Summer trousers of the Ministry of Emergencies are incredibly comfortable thanks to the light and smooth Gabardine fabric, which is ideal for hot weather. The product does not fade in the sun, does not shrink after repeated washings, does not wrinkle. CHARACTERISTICS For hot weather Statutory cut MATERIALS Gabardine (100% polyethylene) Example of material drawing:

The advantage of the MPA-56 trousers is their impressive versatility with a large number of pockets, Molle system and reinforcing pads in the seam area. Thanks to the anatomical cut, you have maximum freedom of movement. CHARACTERISTICS For hot weather For intense work For outdoor activities For military operations MATERIALS Rip-stop

Ministry of Defense cap (office). The cap is made of ripstop fabric, olive color. According to temporary regulation No. 256/41/3101. On the caps and caps there is a badge of distinction according to belonging to the executive authorities, where the law provides for military service (golden cockade), for senior officers, in addition, a visor and a cap band with embroidery in golden color.

Material: semi-wool - Classic trousers with edging along the side seam. -On the belt -6 belt loops. -Two side pockets. -One welt pocket with a flap on the back half of the trousers. -Along the side seam - red piping

The Soft Shell suit is purposefully designed to meet the stringent requirements of Special Forces operators. Designed to maintain a comfortable body temperature of the user in the cold season during vigorous activity, in bad weather, with wind and rain. The suit can be used as a base 5th layer ECWCS Gen.III. MPA-28 trousers: -2 side patch pockets with Velcro flaps; - lateral sections of the belt are tightened with an elastic band; - along the bottom of the side seams - "zippers"; - perforated elastic for attaching to shoes. Soft shell fabric breathes, does not tear, does not get wet, does not restrict movement!

The MPA-35 suit is designed for comfortable work of employees of the Ministry of Defense in hot weather. Consists of trousers and a long-sleeved jacket. On the sleeves there are reinforcements in the elbow area. The bottom of the jacket is adjustable in volume. CHARACTERISTICS For hot weather Statutory cut For work in the headquarters MATERIALS Gabardine (100% polyethylene)

Men's raincoat for employees of the Ministry of Defense of a straight silhouette will provide comfortable service and presentable appearance at temperatures down to -15 degrees. Jacket fabric with a membrane in combination with insulation works as wind and moisture protection. CHARACTERISTICS Protection from cold Protection from rain and wind Statutory cut Only hand wash MATERIALS Rip-stop Membrane Insulation "Fibersoft"

Police windbreaker. This statutory police windbreaker is made of high quality 240g membrane fabric. will be able to protect employees of the Ministry of Internal Affairs from any adverse weather events. A great feature of this jacket model is resistance to wind gusts and resistance to moisture. A hood is folded inside the stand-up collar, which can be easily adjusted on the front. Cuffs with an elastic band, an adjustable waistband, and a fastener with a strong zipper hidden by a riveted fabric strip will also be able to protect from the weather. Along the perimeter of the shoulder girdle, the product is complemented by set-in edging in red. On the shoulder seams on the button shoulder straps are located, designed for attaching distinctive signs. color dark blue main features: the form of the Ministry of Internal Affairs material membrane wide dimensional grid CHARACTERISTICS CHARACTERISTICS OF THE SUIT Material: membrane Composition: polyethylene Density: 240 gr. Cuffs: yes Pockets jacket / trousers: yes / no Seasonality: all-season Optional: authorized police windbreaker

Trousers "Mountain-3" are recommended for outdoor activities (tourism, hiking), as well as a field uniform for mountain rifle units of the Ministry of Defense of the Russian Federation Loose fit, which does not hinder movement Loops for a wide waist belt Belt with a wide elastic band, can be additionally adjusted with braid Reinforcing pads in the area seat, knee and bottom of trousers The knees are protected by a removable polyurethane foam insert (included in the kit), it is possible to use additional knee pads. The latest version of the trousers is compatible with the D3O T5 and T6 knee pads (purchased separately!) The volume of the legs can be adjusted in the calf area using a hidden Velcro elastic Dust-proof muffs with volume adjustment with an elastic band, equipped with an elastic strap Includes removable side braces, easily unfastened when wearing a jacket , small height adjustment is possible Pockets: two side welt pockets two back patch pockets with buttons two side cargo volume pockets closed with buttons on buttons Material: Main material -100% cotton, new high-quality tarpaulin, superior to analogs used by most other manufacturers New processing technology allowed significantly improve the resistance of the fabric to fading and abrasion. Reinforcement linings -100% polyester rip-stop Attention! Remove knee / elbow protectors from their respective pockets before washing. Do not wash protective inserts in the washing machine. When washing tarpaulin products in a washing machine, signs of wear may appear. YOU MAY BE INTERESTED IN: REVIEWS: Review from Survival Panda Review from Vladislav Boychuk (tankist_sssr)

The suit consists of a jacket and trousers. Jacket with central side zip fastening. Front with upper welt pockets with flaps and leaves fastened with textile fasteners and side welt pockets in a "frame" fastened with a "zipper" tape. The front and back of the jacket are lined. Turn-down collar with stand. Back with a yoke. Sleeves are set-in, single-seam, with reinforcing pads in the elbow area, with stitched cuffs, fastened with a textile fastener - a slit with a puff. For fastening removable shoulder straps, belt loops are located in the area of \u200b\u200bshoulder seams, two continuous loops are swept perpendicular to the shoulder seam. On the bottom of the jacket there is a detachable belt, the volume of which is regulated by side sections with an elastic band. Straight trousers, with stitched arrows and side pockets along the front halves. Front closure of the trousers with zip fastening. There are darts on the back halves. On the right back half there is a welt pocket with a flap and a leaf, fastened with a textile fastener. Stitched belt, fastened with a loop and a button. To adjust the volume, the belt is pulled together with elastic tape in the area of \u200b\u200bthe side seams. Additionally, you can purchase:

Field uniforms of servicemen of assault and special units of the RF Ministry of Defense. Casual clothes of the personnel of the private security company. The jacket is shortened at the waist. There are ventilation elements in the armpits and groin area. Sleeve bottom with dustproof aprons. 10 flap pockets with buttons. All fasteners in the jacket are hidden. The bottom of the jacket is adjustable in volume. On the bottom of the trousers there are protective cuffs. Weight -1100gr. Color: black, green, kmf. Material: rip-stop blended fabric.

Medal of the Ministry of Defense of the Russian Federation "For military distinctions

In the spring of 2003, the Minister of Defense of the country signed an order number 100 on the establishment of a departmental medal of the Ministry of Defense "For military distinction". In the summer of 2008, in accordance with order 342, the Regulation on the award was supplemented and amended.

Rewarding and wearing rules

The Ministry of Defense award "For military distinctions", in accordance with the Regulations, can be awarded to the personnel of the Armed Forces who distinguished themselves by performing the combat missions and special operations assigned to them, risking their lives, and at the same time showing courage and courage.

The medal can be received by servicemen who have shown initiative and decisiveness, who contributed to the solution of combat missions that were crowned with success, as well as commanders who successfully led the actions of personnel.

The awarding takes place in accordance with an order signed by the head of the country's Defense Ministry. You cannot get a medal a second time. The award is presented in a solemn atmosphere. The medal can be transferred personally by the Minister of Defense or by any other persons who have been instructed by the head of the department to do this.

The reward should be worn as prescribed in the existing rules for wearing uniforms by aircraft personnel. It is located on the left side of the tunic after state awards and in front of the rest of the medals of the Ministry of Defense. It should be located behind it.

Medal description

The product is made of a metal alloy resembling silver. Its shape and size are similar to other awards of the Ministry of Defense. The medal is made in the form of a circle with a cross section of 3.2 centimeters. There is a protruding side on the front and back sides.

The obverse of the item contains several images. The central part is occupied by the inscription. In the first line - "FOR BATTLE", in the second - "DIFFERENCES". Above the words there is an airplane on the right, a helicopter on the left. By the inscription you can see a tank and an infantry fighting vehicle.

There are several inscriptions on the back of the item. In the central part - "No. ___". Above, in a circle - "MINISTRY OF DEFENSE". Below - "RUSSIAN FEDERATION".

An eyelet is provided in the medal to connect with a pentagonal shoe, the back of which is attached to the uniform with a pin. A ring is threaded into it. The block is covered with a moire striped ribbon. On the right is a narrow two millimeter black stripe, followed by a 10 millimeter orange one. Then narrow white, 8mm orange and black again.

The product is manufactured by the Chelznak commercial and industrial enterprise.

Semantics of the reward

The military equipment depicted on the obverse indicates that the entire personnel of the country's Armed Forces are ready to fulfill their military duty to protect their homeland.

The colors on the medal ribbon are similar to those of the St. George ribbon. The orange and black stripes indicate that the medal is included in the general system of insignia of the RF Armed Forces. All the colors indicate that the awarded person behaved boldly and courageously when performing the assigned combat missions.

Benefits to cavaliers of the award

In May 2010, the Ministry of Defense signed order number 500, which stated that the holders of the medal "For military distinction" were entitled to receive a lump sum payment of 75% of the official salary. Monetary incentives can be received by military personnel, contract soldiers, civilian employees of the Armed Forces.

Award history

The idea of \u200b\u200bcreating a similar insignia of the Ministry of Defense, which could be presented to the military, participating in hostilities and special operations, where they were forced to risk their lives, appeared in the military leadership back in 2002.

The leaders of the General Staff of the Armed Forces decided that such a distinction should be received by people whose merits and achievements are not provided for by the regulation on state awards or in the case when, for the same reasons, they refuse to award a person with a state sign.

The first trial batch of products was produced in the fall of 2003 by the Moscow plant "Mosshtamp".

Features and options for the medal

There are several variations of this insignia. They differ from each other in the following features.

1st type. There is a number sign on the back of the product. In the first version, all the elements of the images are not too clear, blurry. There is a rectangular area on the reverse near the number sign, which is intended for writing the award number. No manufacturer mark.

The second version of the award differs in that all drawings are made clearly. The surface has a small degree of "shagreen". There is no platform on the reverse near the number sign. At the bottom of the back there is a manufacturer's mark.

2nd type. There is no number sign on the reverse. All drawings on the award have rounded edges. There is a small degree of "shagreen" on the surface. In the center of the back there is an image of the Armed Forces emblem. The manufacturer's sign is located under it.

Medal Awarded

The appearance of the badge "For military distinction" coincided with the time when the fighting took place in the 2nd war in Chechnya. Another period of time when there was a massive presentation of the award was the conflict with Georgia that took place in the summer of 2008. The number of those who distinguished themselves and received a medal are the following military personnel:

A.V. Volovikov. Was born in 1965. Air Force Colonel. The head of the flight safety of the helicopter regiment. Hero of the Russian Federation, full holder of the Order of Courage (one of three people). He took part in two Chechen campaigns.
N.V. Vorobiev. Police lieutenant colonel. An employee of the Primorsky Department of Internal Affairs of the Arkhangelsk Region. Was twice - in 2001, 2007. he was sent to Chechnya, where he showed valor and courage.
N. Sobolev. Corporal. Received an award for courage in South Ossetia during the Georgian conflict in the summer of 2008.
J.A. Umbetov. A serviceman of the North Caucasian Military District, now continues his studies in Astrakhan. Recognized for his valor during the conflict with Georgia.
V. Tkachenko. He served in a tank repair battalion. The award was presented for courage in carrying out the operation to force Georgia to peace.
E.S. Isaldinov. Graduated from the Polytechnic College in Novotroitsk, Orenburg Region. He won an award for distinction during the conflict with Georgia.
D.Yu. Fights. Served as a driver-mechanic. He held the position of transportation department. In the summer of 2008, he defended the population of South Ossetia with a submachine gun, took part in the settlement of this military conflict.
M. Kushev. Reserve sergeant. He served in the 76th Airborne Assault Division. In 2008 he was seconded to South Ossetia.
S. Liseny. Senior sergeant of the Airborne Forces. Military paramedic. He served on the Georgian-Ossetian border. When hostilities began, he acted quickly and clearly. Saved the life of a wounded soldier.
P.N. Swan. Was born in 1988. After graduating from the College of Informatization and Management in Rostov in 2007, he was drafted into the army. He served in a reconnaissance company. Provided the safety of Russians living in Abkhazia and South Ossetia. Received the rank of junior sergeant of the guard.

Related awards

At various times, the Ministry of Defense instituted awards related to "For military distinctions", in particular:

... The order establishing the award was signed in December 1999. Servants of the Armed Forces who have shown themselves well in ammunition have the right to receive it. There are two degrees of reward, of which the first is considered the highest. First, the second degree is awarded, and only then the first. It gives the right to a one-time cash incentive, the amount is 75% of the salary.
... It has been awarded since 1995. The owners are the personnel of the Armed Forces who have shown initiative, diligence and at the same time have a certain length of service. There are three degrees of reward, the first being considered the highest. To obtain the third degree, you must serve 10 years, the second - 15, the third - 20.
"For distinction in service in the Ground Forces." The documents establishing this mark were signed in the summer of 2013. A person serving in the ground forces, including civilians who have served for at least five years, has the right to become recipients of the award. Awarded for other merits specified in the Regulations.
"". It began to be awarded in the spring of 1995. Awarded to military and civil servants of the Armed Forces for personal merits in the development of military cooperation with other countries.

Tags:,

FREE CONSULTATIONS AVAILABLE FOR ALL CITIZENS BY THE SPECIFIED PHONE NUMBERS OR IN CHAT MODE

Additional payments for national prizes to military personnel: one-time financial incentive

Payment for the order "For a privilege (preference) and" military merits "Honored Army Expert of the Russian Federation" in addition contribute to the transfer of 5 salaries to the army. In addition, there is a sequence of prizes, which involve an additional payment in the form of another salary during work, for example, "For Courage".

also, these and other state awards, for example, "Excellence in Army Construction" will be allowed to take the benefits (preferences) of the veteran title, which is awarded upon reaching the retirement age.

Based on the laws, it is possible to declare with confidence that family members of a serviceman (a child and a widow under 23 years of age studying on a full-time basis) will only be able to claim payments under social guarantees and the loss of a breadwinner (an immediate appointment at a medical institution, a discount on a sanatorium-resort treatment with the advice of a doctor and more).

Benefits (preferences) for the medal for military valor of the 2nd degree

In addition, those soldiers who did not take part in real hostilities or did not stay in places from the category of warm spots will be able to take this honorary symbol of distinction. For rewarding it is required to apply a lot of strengthening, to show valor and courage.

The awarding procedure is carried out only by the current Minister of War of the Russian Federation. In accordance with the law and internal regulations, other persons are not authorized to award. In the event that the awarded person does not leave work, but shows amazing success, then he is often imagined to receive the highest degree (I) of the medal "For Military Valor".

A dark stripe 2 mm wide frames a silk moire ribbon along one edge;
10 mm part of deep orange color;
Red 12 mm;
The red part has 2 white stripes 1 mm wide. The distance between them is 2 mm wide.

Medal "For military distinction"

Meda? L "For the battle? E otli? Chiya" - the departmental insignia of the RF Ministry of Defense, created by order of the RF Minister of War No. 100 of March 31, 2003. On December 14, 2017, a new regulation on the medal was approved.

The medal will be able to be awarded to soldiers of the second armies, bodies and military formations where military service is provided, and soldiers of the armies of foreign countries who assist in responding to the tasks assigned to the Armed Forces of the Russian Federation.

The medal is connected with a ring and a lug to a pentagonal block covered with a 24 mm wide silk moire ribbon. On the right edge of the tape there is an orange stripe 8 mm wide, bordered on both sides by dark stripes 2 mm wide, to the left - a white stripe 2 mm wide, an orange stripe 8 mm wide and a dark stripe 2 mm wide.

Economic activity

Monthly allowance for work with information constituting a national secret

D) those attracted to perform tasks in mountainous and high-mountainous terrain, who have completed training under the program of mountain training instructors and occupy military positions in VUS "Mountain training", "Physical training and sports work" and "sports percent and Physical" - 70 training;

FREE CONSULTATIONS AVAILABLE FOR ALL CITIZENS BY THE SPECIFIED PHONE NUMBERS OR IN CHAT MODE

Candidate of Science - 20 percent;
Professor - 40 percent;

For military distinction medal benefits (preferences)

There are a couple of variations of this insignia. They differ from each other in the following highlights.

There are a couple of inscriptions on the back of the item. In the center - "No." Above in a circle - "Ministry of Defense". Below - "RF".

The product is made of an iron alloy resembling silver. Its size and shape are similar to the second prizes of the Ministry of Defense. The medal is made in the form of a circle with a cross section of 3.2 centimeters. There is a protruding side on the front and back sides.

Payment for a medal for military distinction

Hello, I'm wondering if any specific payments or payments are required when receiving a medal for military distinction

5. For servicemen serving under a contract, awarded national prizes (national awards) of the USSR or national prizes (national awards) of the Russian Federation during the military work, as well as those awarded the honorary title of the USSR or the honorary title of the Russian Federation, the amount of lump-sum benefits provided for by part 3 of this article increases by 1 salary of financial content.

The medal “For military distinctions” was created by order of the RF Minister of War of March 31, 2003 No. 100 “On the establishment of the RF Ministry of Defense medal“ For military distinctions ”- it is not a national prize, but belongs to the departmental.

What medals are awarded to soldiers of the Russian army

This medal is to be worn on the uniform on the left side, at the end of the existing national prizes.

At the moment, active demining work is being carried out in different regions of the country. Based on this, this prize is often awarded.

At the moment, this prize is being awarded to military personnel and civilians who contributed to the strengthening of relations between states that cooperated with the Russian Federation. This prize is awarded only once. Re-delivery is not provided.

Payments for national prizes to military personnel

Be directed to know that payments are not made even if a serviceman wants to go to work in a different power structure, since in this case he can take this payment at a new place of work after the end of his dismissal.

It is possible to see the features of combat prizes in the field of social protection for soldiers and military pensioners using the example of the Order of Courage. In the Russian Federation, he has been awarded more than 100,000 people and is considered the successor to the Order for Personal Courage.

The modern set of awards was created on March 2, 1994 by the Decree of the Head of the Russian Federation No. 422 "On national prizes of the Russian Federation". Specifically, it for the first time established the rules for awarding national prizes to servicemen in modern Russia. The domestic award set has changed many times, and today there are 7 army orders and about 10 medals in it.

Benefits (preferences) for medals distinction in military work

1st degree - for rewarding soldiers with a length of service in calendar terms of at least 20 years

The medal "For Distinction in Military Work" is awarded on behalf of the Presidium of the Supreme Soviet by the Minister of War of the USSR, the Head of the USSR Ministry of Internal Affairs, and the Head of the State Security Committee of the USSR.

The medal was created by the Decree of the Presidium of the Supreme Council of October 28, 1974. The same Decree approved the description and the position of the medal (Vedomosti of the Supreme Soviet, 1974, No. 44). By the decree of the Presidium of the Supreme Council of July 18, 1980, transformations were made in the Regulation on the medal.

What specific benefits (preferences) are awarded for the medal for courage

According to statistics, less than 100 people were nominated for the award in a year. A year later, the list of persons who had the opportunity to apply for an honorary certificate was expanded with a new official document.

Payments and benefits (preferences) to holders of the Order of Courage will be able to be established by regional legislation. For example, they can be exempted from paying utility bills, or they can be provided with free travel in municipal or suburban public transport.

Hello. I am Major Pukirev Vladimir Anatolyevich, a soldier, awarded the medal "For Military Valor" 2nd degree.

Who is awarded the medal - War Veteran

But few people know the order and what are the conditions for their documentary registration?

On the reverse side of the medal there is an inscription - "Veteran of military operations".

Veterans of hostilities on the territory of the Russian Federation have every right to apply for various benefits and benefits.

FREE CONSULTATIONS AVAILABLE FOR ALL CITIZENS BY THE SPECIFIED PHONE NUMBERS OR IN CHAT MODE

LIST foreign citizens nominated for award with the departmental insignia of the Ministry of Defense of the Russian Federation

Recommended sample of the certificate form for the departmental insignia

Drawing and description of the medal "For military valor"

Document overview

Rewarding rules

Wearing rules

Medal description

Medal option until 2017

Image semantics

Additional incentives for the awardees

Additional payments for national prizes to military personnel: one-time financial incentive

Benefits (preferences) for the medal for military valor of the 2nd degree

Medal "For military distinction"

Economic activity

For military distinction medal benefits (preferences)

Payment for a medal for military distinction

What medals are awarded to soldiers of the Russian army

Payments for national prizes to military personnel

Benefits (preferences) for medals distinction in military work

What specific benefits (preferences) are awarded for the medal for courage

Who is awarded the medal - War Veteran

LIST
foreign citizens nominated for award with the departmental insignia of the Ministry of Defense of the Russian Federation