How to fix ski fasteners. How to install fasteners on skis? Using drills

Installation and setting of alkaline skiing are often performed by specialists who know how to do it right. But, if desired, it is possible to prepare yourself. To do this, it is necessary to approach the process with full responsibility without violating the rules of security.

For self-installing fixtures, preliminary preparation is necessary. Need to:

1. Consider the skier parameters under which the inventory must be prepared;

2. Stock needed tool:

• ski themselves, fastening for them, as well as skating shoes;
• roulette;
• screwdriver;
• screwdriver;
• pencil or marker;
• drill;
• screws.

Stages and types of installation

Fastenings are a lever by which the foot transfers the ski command. The second function is to ensure safety for the legs. In situations, when the likelihood is great, the fasteners are freeing the leg from the ski.

• On its device fasteners are the front head and rear heel. Each of these parts allows you to adjust the efforts of the trigger;
• Under the operation effort should be understood as the maximum load indicator. As soon as it is achieved, fasteners work and opens, freeing his leg. Set this indicator helps the scale on fasteners;
• The higher the division of the scale, the greater the load is required for triggering;
• The presence of brakes on fasteners does not allow skiing to point far if they dismissed;
• Often manufacturers sell skis with rails on them. This allows you to move both elements of fasteners and adjust them.

You can select two types of installation of fasteners:

1. Using drills;
2. Using already built-in special rails or platforms.

Let's talk about every way of more.

Using drills

Installation of fasteners using drills is when attachments are mounted on screws. The advantages of this species are to:

• Opportunities to choose any inventory to your liking;
• Installation without gaps and backlash. Ski management, thanks to this, as accurate as possible.

Cons of this type of installation:

• The presence of a tool for mounting;
• Experience and skills in this form of work;
• The inability to use skis if the difference in the length of the shoe exceeds 2 cm.

Important: When reinstalling fasteners using drills, the number of holes from screws in the ski increases. It is poorly reflected on the strength of the inventory. Reinstalling this method is not desirable.

The installation process itself consists of several stages:

• The first step is to determine the center of gravity skiing. You can set it on a small elevation and find a point in which it balances. Mark this place with a marker;
• All mechanisms for sale are accompanied by instructions. If it is not, then it should be noted that for the classic ski, the top point of the foot should be located on the previous one previously. If ski ski, then 8-15 mm closer to the nose;
• The location of the finger (top point) is in the place where the hinge is attached;
• Then the fastener is shifting so that it is on the longitudinal axis of the ski symmetry;
• Now you can abuse the front of the fastener on the central screw. If there are guides, it is necessary to center with them.

If not, then the boot is inserted into the installed element and also installed in the center. This will help determine the correct position of the heel. Now the shoes can be removed and make the necessary holes for the remaining fasteners;

• When a rigid fastener is used, then the heel of the boot should cover the groove by 10-15 mm. For system mounts (with guides), such an installation is necessary at which the boot is completely on the guide.

Use already built-in special rails or platforms

Installing fasteners using embedded rails or platforms greatly simplifies the entire process and it has the following advantages:

• The most simple installation and adjustment of the mounting ski fastenings, without resorting to the help of specialists and without using the tool;
• The ability to independently adjust the mounting ski for the boot of a different size or manufacturer;
• Ability to shift the center of the boot.

By minuses include:

• The selection of the mount is limited (since it is already integrated);
• All such fasteners are given a small gap over time, which is reflected on the accuracy of ski management;
• Increase the weight of the sports projectile as a whole. This is a hindrance in the performance of some elements, especially for experienced skiers.

Rules setting fastening

After mounting fasteners, they need adjustment. It is done for comfort and safety. Competently performed adjustment of the mounting ski mounts allows:

• Take into account the skier parameters: weight, leg size;
• Confidently hold on and maneuver during riding;
• Take into account the load that falls on your feet and ensure their safety.

If skiing are bought with fasteners installed on them, then the seller itself is often adjusted. Some manufacturers do not allow self-adjustment. This is a prerequisite for the warranty on their products.

Under regulation It should be understood as the correct arrangement of the front head and the back heel for the skier. It is important to consider:

• Experience and skills of rider, as well as his physical condition;
• Driving manner (calm or aggressive);
• The condition and complexity of the ski route.

Skier parameters and a corresponding triggering force on the fasteners:

This table needs to find your indicators. When they are in different lines, you need to choose the one that is located above.

Then the desired column is determined along the corresponding length of the sole. The cell on the junction will determine the appropriate response effort. This method is suitable for newbies or for skiers with a cautious ride style.

• If the skier feels confidently and has certain skills, then the indicator from the row should be used.
• In the case when aggressive riding on complex tracks is practiced, the indicator will be correct to 2 lines below.

When working with fasteners, some points should be taken into account:

• Do not make the setting of fixtures too much. This increases the likelihood of injury;
• Too weak setting will also not allow you to enjoy the ride. Skis will jump off at any, even harmless, fall. It is inconvenient even for a beginner, especially for a professional;
• It should be borne in mind that the length of the boot sole may differ depending on the manufacturer. This means that skiers with the same leg size do not have to use the same skis with the adjusted fastening.

We also offer you to watch a video about how to put mounts on the mountain skiing at home without the use of special tools and devices:

Also interesting

Knowledge of how to install a skiing attachment, important with amateur and professional skating. The convenience and safety of the operation of the inventory depends on this. Consider the main nuances of this important aspect.

general information

The modern market presents the widest range of skis for a variety of riding. They differ in brands of manufacturers, appointment, price category and material. Not all newcomers know how to install a skiing attachment? In principle, this work can be trusted to specialists. However, this will require additional financial investments and time costs. In fact, with such technology, it is quite possible to figure it outself.

Constructive features

Skiing fixture is intended for reliable retention of the heel and the front head of the boot. It should be carried out by the appropriate adjustment of the structure affecting the safety of the operation of the inventory. When adjusting fasteners, the anthropometric data of the athlete is taken into account.

The element itself is equipped with special pins intended for fixing the boot. In addition, the package includes a set of brackets and bends that do not give the leg to slip, providing free movement inside the design. Knowing how to properly install skiing for boots, you will provide maximum convenience when riding, regardless of the purpose of adaptation and other factors. It is worth noting that in the heel part modern locks are very elastic, reduce the level of vibrations and maximize the convenience of operation.

Types of fasteners

Modern locks are divided into three main categories:

1. Rank mount type Nordic Norm 75 mm. Its advantage is at an affordable price, despite the fact that the technical parameters leave much to be desired. Foot hold is not very good, the rigid design does not provide full-fledged control of the boot, the sole is often sliding due to the lack of sufficient transverse and longitudinal stability. The ski style of riding, as well as the classic version will not give you a special pleasure.
2. Innovative instances of type NNN and SNS. To know how to establish a fastening for skiing these species, you need to remember that they are a design with the highest operational parameters. Such systems are functioning using flexors and guide elements that greatly simplify the installation task of the elements. The sole of the boot on such an inventory is firmly and convenient, the addition stabilization in any style of skating allows you to feel confidence and facilitate the process of movement.

Read more about NNN and SNS systems

The fixation class of such devices belongs to the tourist category, often equipped with automatic latches. This option is optimal for beginners. The differences between NNN and SNS systems are in the presence of two longitudinal components of the elements at the first category (the SNS variation is equipped with one analog).

To know how to correctly establish a skiing attachment, it should be remembered that the difference between running and mountain versions is minor items that fix boots directly to inventory. Therefore, the main emphasis must be done on choosing shoes. Sports boots must match the riding mode, be comfortable when wearing and differ design. Then you can proceed to fixing them.

How to install a running skiing attachment?

Initially, you must perform proper work on the drilling holes. Make this work using a special device that allows you to accurately set space for processing.

When drilling, the corresponding drill diameters are selected, each of which is suitable for a specific ski type. Among them:

• 9.5 * 4.1 mm - for metal surfaces.
• 9.5 * 3.5 mm - for wood and its analogues.
• 7.0 * 3.5 mm - for juniors and beginners. Usually the thickness of such an inventory is less than in adult professional modifications.

After all the necessary holes are drilled, a slight adhesive is added to the slot on the canvas, after which they start mounting the mount. Screws must sit on their place tightly, without the backlash and displacements.

How to set molding on skiing of mining modifications?

Such an operation is performed in several stages:

1. There is a center of gravity skis, which outlines the line.
2. Locks are placed in such a way that the front part of the structure is compared with the edge of the drawn tag.
3. The attachment is neatly inserted into the attachment with the calculation to make its base to be located in the center. This is one of the important points in the arrangement of the mounts for the skiing.
4. After the "fitting" shoes are removed through the holes at the place of its placement, additional nests for the self-tapping screw are made. This can be done with sewing. And fixing fasteners are performed by means of a screwdriver or screwdriver.
5. Next, the boots are securely fixed thanks to the holes done. Accurate compliance with the instruction will make it possible to achieve a dense fit of the leg, the desired level of depreciation, rigidity and safety.

The presented leadership will provide an opportunity to understand the features of the fixation of ski fasteners focused on overcoming mountain and steep snow-covered slopes.

Mountain fixing equipment is only suitable for overcoming slopes and steep partitions. Running on such skis will not be comfortable, difficult and inffective. There are completely different overall parameters and technical indicators from such an inventory. In addition, reliable and competent installation of clamps - a guarantee of comfort and safety.

Also, it was also considered how to install fastening for cross-country skiing. This type of inventory is designed for skoth and classic running. But this does not mean to mount the locks for boots can be poorly. A similar sport is associated with many health risks and requires a careful and responsible approach at all stages, including the choice and fitting of fasteners.

Fastenings are metal brackets that are attached to skiing, and belts with buckles designed to hold the shoes in the bracket. This type of fasteners is quite common, as they are reliable and suitable for any shoes, that is, special boots are not required. Semi-rigid fastenings are less durable and comfortable than tough, besides, they are heavier.

Hard attachments are designed for special ski, but when fitting can be suitable for different shoes. The location of the spikes and is standard.

How to install ski fasteners

To install skiing fixtures, first of all, you need to determine the center of gravity skiing. To do this, turn it over it, put the middle on a sharp edge of the knife or ruler and move the object along the ski until it accepts the equilibrium position (skiing should be horizontally). Mark the found on the outside.

After the gravity center is defined, proceed to the next installation phase. Usually included with the mount there is a template, with which you can outline the position of each hole for screws to install fasteners on skis. Here you will use the earlier line of the center of gravity: it defines the correct location of the template on the ski.

Schedule the location of the screws, drill holes, the depth of which will be slightly less than the length of the screws. They need to pour a small amount of epoxy resin (sometimes a special adhesive supply kit). Now you can fasten the mount.

Check

It is always necessary to check whether fasteners are installed correctly. To do this, grasp the shoes and lift it and attached ski. If you did everything right, its front will outweigh, and the cargo site at the same time will fit the boot sole.

Folk wisdom: "Seven Once dead - once a rejection "

1. SNS and NNN mounts can also be used to find the center of gravity. Use flat, as a ruler, side and put the end side to the floor. Perpendicular to the top we install ski as scales, moving longitudinally, we achieve equilibrium. With a dramned fastener, it is measured by attaching a fastening to the ski, while achieving the axis of the center of gravity passed through the locking groove of the shoe by moving along the ski and the fastening itself.

2. Finding the center of gravity, mark on the ends of the skis perpendicular vertical lines on both sides of the attachment to the upper side of the ski and connect them. This can be done with the help of a square, although the error within two millimeters is permissible for such a ski length. After that, we do the same procedure with the second ski.

3. No difference between the shoes of the new sample with the fastening directly at the front cut and the former sample, where the mount is on the protrusion - both axis of the center of gravity is at the front cut of the boot. It turns out that the old boots led out the axis of the center of gravity. The planned style of running does not matter. The main thing is that in the suspended state of skiing did not outweigh either the front or from behind. The exceptions are only skiers with experience, which for "increase the speed" slightly shift them back from the center of the center of gravity. But for the use of this in practice, experience is needed.

4. Modern ski mounts of the SNS and NNN type have a transverse groove for fixing the metal rod of the shoe in the front of it. This groove must be combined with a durable axis of the center of gravity. Directly under the groove in the center there is a longitudinal groove. The average fastening element is then inserted into it. The bottom bottom part of it coincides with the center of the rod, it and we combine with our marked line on the upper side of the ski.

5. Previously, you must unscrew all three to the end of non-fastening screws. If automatically snap-in SNS Profile Auto is closed, and not get to the third screw, then you need to click on the bracket (the latch will shift inside), after which you need to insert a thick screwdriver or another suitable tool so as not to give the fixer to return. Then we fold the bracket to access the screw. A similar procedure is carried out to remove fastening from skis.

6. Next, it is follows to skiing by tags and markup with a selection of future holes in the center. Recalling fasteners, it is necessary to verify the middle label strictly in the middle using a caliper or roulette. Two rear holes should be equally distant from the edges. For correction, make a seer new tags deeper.

7. Before drilling, we advise you to progress and check the depth of the screw in the screw, in order not to break through the ski through. We subtract the height of the fastening and the residue trying on the ski. If the ski is thin and the length of the standard screws is redundant, then you need to replace them with screws with the required length.

8. On the drill, mark the depth of the planned opening of the insulation tape, if there is no line on the drill. The drill must be a diameter of from 3.6 to 4 mm depending on the thickness of the screws. Then gently drill six holes on the whole pair of skis. Why carefully, because today skis have fiberglass cellular filling under several millimeters of a wooden insert for fasteners. Therefore, the drill, despite the limiters from the insulating tape or the ruler, can easily slip through the pressure. Do not put pressure during drilling on a drill. Skis predeterday to press the foot or fix the clamp to avoid the spring factor. It is necessary to drill strictly vertically, without distortion, without swaying the drill, achieving a clear shape of the holes.

9. Drilling three holes from each ski, remove plastic brackets, detaching skis, fastening to them with screws, pre-nagged no more than half, it will be easier to align. Then with the help of a screwdriver Tighten on a slight effort, there is still a certain risk of disrupting them. Check the connection density. Nothing should hang out.

Note: Do not use glue, as it is only suitable for wooden skiing, and the mass of them negatively affects modern insides. Thick six millimeter screw closes the hole tightly, and prevents moisture from entering. And the Kanta screws have time to steal earlier than something can burn inside the ski.

10. Removed bracket set to the place, sticking the bottom end into the loop, then pressing the bracket down with the effort to the characteristic click. Carefully! Do not proper fingers. Next, we collect fastening elements by taking off the previously screws - in the middle element two, and in the last one. Install the jack elements by closing the previous screws. We note similarly with the sequel hole, we remove the elements, drills, screw the screws, setting the fastening elements to the stop. After screwing the last "scythe", the hole is closed by a plug.

Successes to you on the ski!

And they made a purchase that had long been dreamed of. And now you will not wait for them to ride! Only here is a small problem - you need to install fasteners on skis. How to install fasteners on skis? Let's deal with.

Ski mounting

1. First, decide on the type of ski and fasteners. You can have classic or ski skiing. The installation of fasteners will be the same, but some people in the ski ski shift the position of the mounts a little back to skiing "run" faster. If you are not a pro, then it is better not to risk, and install fastenings on the center of gravity skis. Old or new you will use fasteners - this is your personal choice, but it depends on what means to apply it to secure them.
2. Read the instructions. If she is understandable, and no questions arise, then act strictly on it. If not, then read the article further.
3. How to install fasteners on skis? Determine the center of gravity of each ski. How to do it? Turn over the ski sliding surface up and install it on a sharp edge of some object (knife, line, etc.) so that the edge in contact with the middle of the ski. Ski must be in the position parallel to the floor. Carefully moving the edge along the ski, find the position in which the ski will be in equilibrium. Lock it with a handle, a marker or something sharp on the outer side of the ski (opposite to the moving). Gravity center found.
4. Usually, together with the mount, the template is attached to the template for which the holes for fixing screws are determined. However, recently, manufacturers depart from this. Therefore, when you get fasteners, check if there are these patterns. If not, they can be purchased separately. Considering with the center of gravity, attach a template to the ski and tick the place of attachment of screws.
5. Drill small holes, slightly less than the length of the screws. In the resulting holes, it is necessary to fill a little epoxy resin or special glue, which is included in the kit.
6. After that attachment can be screwed. To fasten the boot to fit, you can remove extra fastening sections. If the spike is screwed separately, then its position is determined by the size of the ski boot.
7. If the designer on the instructions is attached to the plastic stud, it can be replaced with a self-sufficiency for reliability. If you use new mounts, then the heel can be glued with special glue, which is included in the kit. The most important thing is to press it pretty. If the attachments are old, it is better to use more powerful glue. For example, "Uranus". At the same time fastening, and the place to which it will be attached, you need to carefully clean from dirt and fat and warm it. The glue should be smeared with a smooth layer on both sides and wait 1-1.5 minutes until a sticky thick surface is formed. After that, the mount must be pretty pressing to ski.
8. When you finished installing fasteners, wait at least a day. And then you can start riding!

Here are the main points of how to correctly install fasteners on skis.

If you are afraid to spoil skis and fastenings and are not sure that you do everything right, better contact a specialist. Some stores are offered for a fee installation of fasteners right on site, as a rule, it is not particularly expensive.