In the season of 17-18, a new service appeared - courier delivery skis to the service and back.
The possibility and timelines are consistent individually by phone +74957671661
Shop \\ "Multi-Sport \\" Provides the following service services
- Installation of running skiing
- Installation of fasteners on rollers
- Treatment of sliding surface ski
- Replacing paws and roller tips on ski sticks
- Crossing ski sticks under the desired Rostovka
- Professional advice on the preparation of cross-country skiing
- Professional selection of cross-country skiing for the weight of the athlete (ski stiffness promoter on the flexstater) - only for racing models
Tuning Sliding Surface Ski
The top layer of plastic sliding surface, even if it looks good, usually inhomogeneous, uneven and coarse. Therefore, it manifests itself worse, both in slide and in the ability to contact with lubricants. Also, when applying structures by kumps, cycles, brushes, or with the help of the stereft-machine on the unprepared upper layer, many defects remain. Therefore, in order to achieve the best result in further processing and slide, it is necessary to prepare the upper layer of the sliding surface properly.
Deep grinding / cycle -
Recommended for processing:
- New skis.
- Ski, which were in long-term operation without proper care (service).
- When repairing the sliding surface.
- Ski, which are repeatedly and often treated with paraffins, especially using irons at high temperatures.
- unsuccessfully polished skis.
For skis, which are processed periodically, which do not need to align the sliding layer, easy repair, deep basic pre-grinding / cycloke is not required, so it is recommended to do only to the final stage of processing - by updating / applying a new structure.
Lubrication, cleaning the sliding surface ski.
Ski preparation for competitions.
Maximum adaptation of the sliding ski properties for specific conditions, given the structure of snow, temperature, humidity, distance length. Includes full preliminary cleaning of the joint venture, paraffin treatment LF-HF, applying the finishing lubrication layer, easy adjustment of the joint venture under the weather conditions.
Paraffin base treatment.
Used:
With primary processing of new ski.
- To improve the state of the sliding surface of the skis after grinding and other mechanical effects on the surface. (Due to the refuge of microlos and microwaves, wipes, saturation).
To adjust the structures (from coarse to smooth).
For adaptation to specific weather conditions.
- As a soil, the foundations for further lubricant.
- To clean the sliding surface.
- To reduce the adhesion of the sliding surface to the rigid snow crystal.
The procedure includes two paraffin-cleanedLF. various rigidity, with iron, scraper, brushes.
Complex "Economy" (Premief, sharpening and paraffin) 850
Grinding and sharpening of Kant on the edge of the ribbon, complex machining paraffin.
Complex "Economy +" (predisfift, scratch, sharpening and paraffin) 1650
Grinding and sharpening of Kant on the edge of the ribbon, repairing the sliding surface, complex machine treatment with paraffin.
Complex "Standard" (Premispiph, scratchop, extrasliff, sharpening and paraffin) 2400
Grinding and sharpening Kant on the facet of ribbon, repair of the sliding surface, extra-grinding on the stone, complex machining paraffin.
Complex "Nordic" (Extloclif, Pouring Scratches, Extloclif and Paraffin) 1800
Repair of the sliding surface, extra-grinding on the stone, complex machining paraffin.
Comfort complex (predispiph, scratch fill, extrachliff, sharpening, tuning of Kant and paraffin) 2750
Grinding and sharpening of Kant on the edge of the ribbon, repair of the sliding surface, extra-grinding on the stone, tuning edge on the edge, complex machining paraffin.
Complex "All Inclusive" (the whole complex of work is included) 3990
Grinding and sharpening of Kant on the edge of the ribbon, repair of the sliding surface, extra-grinding on stone, repair (bundle, deformation of edge), Cant tuning on the edge, comprehensive paraffin machining.
Complex "Paraffin Processing Universal" (Machine) 300
Cleaning the base of the base, if necessary, processing a metal (bronze) brush, applying universal paraffin on the WaxJet machine, polishing. The processing of the sliding surface of the ski ski paraffin significantly improves their running quality. At the same time, the application of hot molten paraffin - occupation, firstly, dangerous, secondly, requires special skills, and thirdly, has its tricks and subtleties. Our specialists will apply universal all-weather paraffin on your skiing on a professional machine, and you can enjoy a great slip into any weather.
Complex "Treatment of Temperature Paraffin" (Iron, paraffin in price is not included) 250
Cleaning the base of the base, if necessary, processing a metal (bronze) brushed, applying base paraffin using an iron, cyclove and polishing with brushes. Holding ointment: cleaning the shower pad, eye treatment, drawing ointment with an iron "pyramid in 3 layers".
Complex "Processing Basic Paraffin" (Iron, Basic Paraffin is included in the price) 390
Cleaning the base of the base, if necessary, processing a metal (bronze) brushed, applying 1 layer of base paraffin iron. In order for your ski skiing to serve as longer as possible, they must be allowed before long-graduating. Preservation takes place in several stages: cleaning the sliding surface, applying paraffin using an iron, cyclove, as well as processing of edges with rust composition. Paraffin will prevent drying and oxidation of the sliding surface, and your skis will not lose in the undercarriage.
Complex "Treatment of Ski Masout Holding" (Ointment is included in the price) 390
Complex "Applying a layer of paraffin for preservation" (iron, base paraffin is included in the price) 350
Complex "Applying a layer of paraffin for preservation" (machine) 200
Promotion "Paraffin Processing Universal (Masha) and Conservation at the end of the season" (Machine) 400
Separate services
Installation or replacement of clips, comb, etc. On g / l shoes (1 part) screw. Seda. 300
Installation or replacement of clips, comb, etc. On g / l shoes (1 part) Klep .Ost. 550
If you have lost or broke a clip or a comb on shoes, you will select the necessary substitution in our service centers.
Hand sharpening Kanti on the verge 850
For reliable execution of cutting turns and confident, safe descents on tight highways, it is necessary to carefully monitor the condition of the mountain skiing. Hand sharpening Kantov requires highly professional skills, so as not to disturb the angle of the tilt of Kant. Our specialists unmistakably sharpen Kant on your skiing with special tools.
Manual sharpening edge database 950
For reliable execution of cutting turns and confident, safe descents on tight highways, it is necessary to carefully monitor the condition of the mountain skiing. Hand sharpening Kantov requires highly professional skills, so as not to disturb the angle of the tilt of Kant. Our specialists unmistakably sharpen Kant on your skis using special tools.
Complex repair of stratification 890
If you incorrectly kept the mountain skiing or did not use paraffin lubricants, the core could disappear and start to get out. In this case, extend the service life of the inventory, contacting the professional service center.
Complex repair of Kant (deformation) 1590
In most cases, a broken, torn, partially lost Kant of the ski ski is subject to repairs. Specialists of our services will hold all the necessary work on the restoration of the geometry of Kant and the further fragile operation of your equipment.
Extra grinding on stone 800
The application of the structure (coat) can significantly improve the sliding properties of the skiing. Machine grinding is the most complicated, but at the same time and the best way to prepare the sliding surface. Mountain skiing, prepared on a professional vehicle with a qualified specialist, have improved running qualities.
Grinding and sharpening Kant on the base on the ribbon 600
The base is polished on the WINTERSTEIGER professional. The perfectly smooth sliding surface without scratches and pile is the key to excellent ski behavior. The TRIM machine guarantees the perfect quality of kant's grinding both from the side of the side surface and on the side of the sliding surface of the skiing.
Shortening sticks 300
When skiing on skiing, sticks perform very important functions and must match your growth. If you are mistaken in the choice of sticks in the store and found that it is uncomfortable to ride them, do not hurry to buy new ones. In our service centers you can shorten the ski sticks under your height.
Repair of the sliding surface 800
If during operation, the sliding surface of the mountain ski receives damage, it seriously worsens their performance. Professional and timely repairs will help solve the problem and extend the life of your inventory.
Repair of the decor skis and snowboards 450
In our services you can restore the appearance of your inventory, removing scratches and jackets with the front side of their ski.
Sharpening Kant on the face of ribbon 250
The TRIM machine guarantees the perfect quality of kant's grinding both from the side of the side surface and on the side of the sliding surface of the skiing.
Application of the finishing structure on the stone 750
Professional equipment of our services allows you to apply a given structure with precise parameters to the sliding surface of the mountain ski. The structure of the structure significantly improves the challenges of the mountain ski and makes their surface more susceptible to paraffin oats.
Cant tuning on base 450
Cant tuning on the edge 350
In our services you can sharpen Kant on professional equipment. The TRIM machine guarantees the perfect quality of kant's grinding both from the side of the side surface and on the side of the sliding surface of the skiing. Cant sharpening is produced in two directions, providing the possibility of applying any number of sharpening angles, both from the side of the side surface and from the side of the sliding surface at the same time.
Cyclical finishing and treatment with brushes (deconservation) 250
To clean the sliding surface from dirt and old paraffin, as well as for applying a microstructure on alkaline skiing and polishing the sliding surface, rotary brushes are used. Our specialists will qualitatively and professionally prepare your mountain skiing for the new season. Qualified specialists of our service centers will produce manual cyclics of your skiing. After the finish cyclove, the sliding surface of the ski ski is perfectly smooth and ready to operate.
Grinding / Square Rough (manual) 450
Modern materials used for sliding surface ski skips provide excellent slip. However, such a material is sufficiently susceptible to mechanical damage and requires regular care, which will extend the life of your winter equipment and improve its running quality. The cycle is the process of removing the upper layer of the sliding surface with the already formed pile with a cycle. In our services, qualified specialists will produce the cyclia of your skiing.
Drawing structure manually by pump SWIX 300
Fastening
Installation of fasteners on cross-country skiing and rollers 350
From the correct installation of fixtures, further ski work depends. The mount should be installed in the center of gravity for the optimal ratio of rigidity and elasticity of skiing, the best balance and controlled ski. To install the attachment, it is advisable to use a special tool that provides convenience and reliability of work. Such an accurate and important work is better to entrust the specialists of our service centers. Many leading ski manufacturers strongly recommend installing fasteners only in specialized workshops.
Installation of mounting on skiing with drilling by template 1000
Installation of mounts on skiing and snowboarding without drilling 450
The correct operation of fasteners is the basis of your safety. Fastenings should ensure reliable bond with skiing within the allowable leg loads and release it when the installed threshold is exceeded. Our masters will install and adjust fastenings on your skiing so that skiing was pleasant and safe.
Dismantling of fasteners 180
If you decide to change shoes and fastenings, in our service centers you will dismantle old fasteners and offer the prophylactic treatment of the remaining holes with special compositions that prevent moisture in the cavity of the ski and rotting the core.
Individual setting of operation effort 120
Incorrect setting of fastening efforts can lead to the most unpleasant consequences. With too strong tuning you can fall, and your skis will remain on the legs, increasing the risk of serious injury. On the contrary, with a weak fastening tuning will be unclipped at the most inactive moment. In our services you will select individual configuration of fastening efforts depending on your weight and level of preparation.
Processing of old holes when reinstalling 240
The remaining openings remaining from old mounts must be treated with a special composition, which will ensure the tightness of the ski. If water will fall through the hole in the cavity of the ski, it will begin rotting the core.
Restoration of the divergent sections of ski and snowboarding fixtures (1 element) 450
If during the active operation, you damaged part of the attachment, then the specialists of our services will restore the design of the attachments, replacing or repaired damaged items.
Installation of mounting on mountain skiing with drilling without template 1590
The correct operation of fasteners is the basis of your safety. Fastenings should ensure reliable bond with skiing within the allowable leg loads and release it when the installed threshold is exceeded. Our masters will install and adjust fastenings on your skiing so that skiing was pleasant and safe.
Gait analysis
(Correct sneakers)
When paying services you get a certificate
per 1 000 rub. For the purchase of sneakers
about 60 minutes
Selection of sneakers using video analysis
Behind the treadmill with speed adjustment and tilt of the canvas is set to a video camera that allows you to shoot with a high frame of frames. After the warm-up step, the run is recorded in a comfortable pace. Thus, you can test several pairs of sneakers to select the most appropriate model.Special software allows you to conduct a frame viewing of the record, at the same time the fine details of the running biomechanics become visible. Special value is the possibility of measuring corners in the joints (first of all, in ankle) in various phases of the running step. Specialist, selecting sneakers, also evaluates the tag technique as a whole.
What are we doing:
- We define the pronation - the selection of shoes in accordance with the severity of the pronation reduces the risk of injury.
- We define the correctness of the foot of the foot when running - when running with the correct setting of the foot, you most effectively spend energy, so you run faster and longer.
- Correct possible deviations in the running technique - the correct Biomechanics runs maximally reduces the load on the musculoskeletal system and the cardiovascular system.
- We select models of running sneakers taking into account your individual features.
Lubrication, sharpening, repairing the mountain ski with your own hands is real. In the article we share experiences how to establish a process at home, what tools and materials to use and where to buy them.
Independent skiing care - lubricant, sharpening, repairs - conventional skiers seem to be complex. We are afraid of many different tools, noisy machines and splashes of sparks that we see in ski service centers.
However, bring your own skiing in order with your own hands is not as difficult as it may seem when you look at this candy soul is a spectacle. This requires some knowledge, as well as a set of tools and materials. And later the necessary skills will appear.
Why independently engage in lubrication, sharpening and ski repair? And in order not to run to the service center because of each little things, spending precious time and money. Yes, and the service center can be very far, especially if you ride outside the tracks.
Yes, we ourselves can apply the desired lubricant in accordance with the weather, close the "samples" in the sliding surface and perform the general preseason.
Again, who does not like to tinker with their skis, especially at the beginning of the season! We holim them and the cherish as the most expensive our heart of the thing.
Today, Batiskof is lowered to depth, where materials and tools for skiing are hidden from our eyes. Do you feel like a cool sea wind brings a light smell of hot paraffin? If not - buy drops, you have a clear runny nose. Open and breathe all the salt of our immense ski ocean!
In any case - in places! The captain is already impatiently biting the steering wheel.
So, in the article we will tell about the simplest manipulations with skis. A more complex repair - broken fasteners, digging carts - better spend in special workshops, which, as a rule, exist with each decent ski-border boxing.
Why lubricate skis and sharpen Kanta?
After all, they go, right? Of course ride, but they can go better, and much. Everything is relative.
The two most important factors that help get more fun from skiing are sharp edging and a perfectly moving lower skis surface (in the people - "sliding", "Slisyak"). And what land is a sliding surface, the more scratching on it and the dulling edge - the worse for us.
To rotate on running skiing, it takes much more effort than to control well-fulfilled and lubricated skiing. Do not believe - no need, but the time will come - you will understand what we were talking about. Then appreciate the amazing sensations of sliding and chaininess that are inherent in well-kept skiing!
There are two skiing options: you or regularly carry them into the service workshop and pay for (maintenance), or one time spend some money on ointment and tools, and then save your blood earned and independently drive in order.
The first option is simple and dull. The second is a cognitive and makes life more interesting, about him and will be discussed below.
Well, here we walked to the most important thing - the maintenance stages of their ski, which consists of 5 steps:
- Preparation and cleaning.
- Repair of the sliding surface.
- Sharpening Kant.
- Cleaning and lubrication of the sliding surface.
- Polishing sliding surface.
Step 1: Preparation and Cleaning Ski
If the skis have not been operated for a long time or intensively operated, it may be necessary to polish the sliding surface on the machine (for this still it will be necessary to go to the workshop). And then start work on them yourself. Find the house at home, and the office will come down, because the signing of contracts is not more important than riding in the mountains, right?
To fix skis on the household table, this fastener will be needed:
Step 4: Cleaning and Lubrication Slide
Turn the ski in the vice so that the sliding surface is drawn up. Find the old paraffin and the mud with a plastic scraper. For a better result, apply "hot scraping": warp the paraffin iron and scroll out the skis of plastic cycles (as a last resort, you can use the box from under the CD) until the paraffin is still warm.
If the paraffin is strongly contaminated, apply a layer of "basic" paraffin, and then consider it - so you can better clean the sliding.
You can lubric ski using an iron or using a ready-made lubricant that is applied to cold skis. Any method prevents the sliding surface drying, reduces friction and helps projectiles to slide better.
Lubricated skis easier to control. Hot paraffin and iron provide better lubricant, since paraffin penetrates deeper into the pores of the sliding surface material and is held longer.
You can use and ready-made lubricant - it is easy to use, but not so long protects the sliding and provides good slide. This option is ideal for quick lubrication in the field, when there is no possibility to use a hot method.
Both lubrication options - and "under the iron", and "on the cold" - are produced in two types: for any snow temperature (universal ointment) and for specific temperature conditions (special lubricants).
Universal options will effectively work in most cases, but for a narrow temperature range, it is better to use special lubricants and paraffins, they are more efficient than universal. The result - skis will slide faster, less spending strength.
The more often processing skis with a hot way, the better the sliding surface will absorb lubricant. So ideally, you need to turn on the iron after each ride. It is no coincidence that athletes lubricate skis to each training session, not to mention competitions.
Well, not athletes better apply a hot way before traveling to the mountains, and after each ride is lubricated with a universal lubricant intended for applying to a cold way.
Step 5: Polishing of the sliding surface
After you have finished processing your skis, let them cool to room temperature.
Using a sharp plastic scraper, remove all surplus paraffin. What will remain in the pores of the material is quite enough for excellent ski slip.
Then with the help of a brush from a horse's hair or nylon, how to polish slippery movements from the sock to the heel of skiing with a strong pressure.
Pop up!
So, now we know how to care for our skiing (and beasts) - how to sharpen edging, repair and lubricate the sliding surface. At the end we give a list of what you will need to work at home:
- Repair plastic P-TEX.
- Fibertex and washing for old lubricant.
- Special file and corner with clamp or "cores".
- Plastic cycle (scraper).
- Horse brush from horsehair or nylon.
- Grinding paper.
- Universal paraffin.
Manufacturers of Materials and Tools for Mine Skiing:
All manufacturers are worthy, besides, sites of all three are translated into Russian. By clicking on the links, you will find a lot of useful information: what other tools are where they can be bought as it cost.
By the way, the old iron with a temperature regulator, the lighter and the knife in the farm will certainly have, and buy a brush for cleaning a file and work gloves where it is convenient.
Once again, he enjoyed what he wrote this work. I hope it will be useful to you. Leave comments, requests and complaints, I will be happy to answer any question. Thanks to my friends who fled the gaps in my experience and knowledge.
Conclusion
If you like my dive (have already made more than 70 trips in the depths of the ski ocean), then the quality and fan with whom we do it, if you have a desire to say a little thank you, then go to my shop Powder and see what design I create For you, lovers of the mountains.
To create this clothing, I also come to know responsibly, as for each submersible Batiscopa Let IT Snow.
Pop up ..., no, one second ...
Now pop up, thank you for being with us! Before the next hike!