What skates are better than Nordway or Count. Professional skates "Bauer" - the choice of famous athletes

One of the most popular ways to spend time in winter - skating. Many people walking on the rink, take the rental inventory. It is reasonable if you ride infrequently. But if you spend a lot of time on the rink, it is worth thinking about the acquisition of your own pair. Here there are many problems: what skates prefer, but what to pay attention to when buying, how to choose the size and what is the ranking of the best skates for ice riding? All these questions are worried about future sports inventory owners.

Surely, many have drawn attention that the shoes of athletes differ depending on the sport. Skates of skaters, skaters and hockey players are very different. Moreover, this applies not only to the appearance, but also the design of the skates.

Skates are produced by three main types: for hockey, for figure skating and for skating sports. In some classifications, it is proposed to separately separate children's models and walking skates, which are used for amateur riding in the parks. To understand the question of which models are suitable for a novice athlete, we'll figure it out in the peculiarities of each variety of shoes for ice riding.

Hockey skates

This sport is quite traumatic and very aggressive. Therefore, shoes for it is made with the maximum possible protection of the limbs of an athlete. It must protect and hit the stick, the rival skate, the falls of washers and other troubles. Therefore, hockey models of skates make rigid special synthetic materials. They are equipped with rigid inserts in places that need to be protected more than others.

Toe of such skates always make solid plastic. Such a tough boot has a number of benefits: it supports ankle and foot well and keeps his legs in the right position.

Other requirements are presented to hockey models. They must provide high speed athlete and not limit it to maneuvering. In this regard, hockey models have a short radius of curvature and are made without teeth on the blade. It protects against clinging for ice with sharp and dangerous reversals. A smaller area of \u200b\u200bsurrounding an athlete with ice provides high maneuverability, but at the same time it complicates the task of holding equilibrium.

Summing up, it can be noted that hockey skates are the best choice for a newbie only if it is going to continue to engage in this sport. For already trained athletes, hockey skates are quite suitable. They give the opportunity to develop high speed, do not limit the freedom of maneuver.

Read more about hockey skates - in one of the issues of the Galileo program:

Figure skates

These models are distinguished by a long straight blade protruding for a heel to a distance of about 2 cm. In front of the blade there are sharp teeth, which give the ability to perform a variety of tricks and perform jumps. But at the same time, the teeth deliver many inconvenience to beginners who still do not know how to confidently stand on the ice. They cling all the irregularities of ice street rollers and cause many falls. For the rest, exactly curly skates are considered the most optimal option for beginners.

The shoe of such skates is made of leatherette or genuine leather. Such material avoids numerous injuries due to the tough support of the ankle. But such a material makes the shoe too thin, ride on the street in a large frost on such skates simply cold. To some extent, the thermal underwear helps to solve this question. Boots curls Usually done high and with lacing all over. This makes it easy to control the degree of fixation of the joint.

Pleasure skates

These models do not have any manufacturer standards. The appearance of such skates can also be similar to curly and hockey. A distinctive feature of pleasure options is a soft insulated shoe. The blade from these skates resembles curly, but the teeth will not be so big and sharp or may not be absent.

If the blade is more like a hockey, then the degree of rounding them will be not too big. Pleasure skates are designed for unhurried riding and getting pleasure from the process, and not for learning complex pyruets or racing with a washer.

The boots of pleasure models are distinguished by great comfort. They are softer than sports models. Clasp can be a classic lacing or like roller skates - Buckley. In the latter case, plastic parts will also be on a soft booze. Such boots are usually insulated so that you can ride in large frosts. On the other hand, a soft shoe does not really fix ankle and does not allow to perform complex maneuvers.

Children's skates

For kids, skates are equipped with an elevated width blade, which gives additional stability. In some models, even double blades are provided. Such models are recommended for children under the age of 5 years. After the baby is mastered on the rink, the children's model is recommended to replace the usual one. Often parents buy sliding skates. Outwardly, they are more like amateur, but their boots are made of plastic. They can change by 3-5 sizes.

If the child is not easy to ride for pleasure, but to develop in sports, then it is better to immediately buy the right skates. They may be larger in size, but no more than 1 size. Otherwise, the boot will hang out on the leg, which creates conditions for injury.

What skates choose you?

Poll Options Are Limited Because JavaScript is Disabled in Your Browser.

28.11.2017

How to choose skates

If you have decided on the view of the skates, it's time to go to the store for fitting and shopping. It is very important to buy skates after fitting. Only so you can solve this pair suits you or not. Do not forget to grab a couple of thick woolen socks with you, which you will wear during open-air riding.

Criteria for the choice of figured skates

Traditionally it is believed that curly skates are female models. Before buying, be sure to put on a couple and go to them for a few minutes. Rate your feelings. The boot should not be very close, at the same time the foot should not hang in it. Too loose boots are poorly fixed by ankle and reduce stability.

The back of the shoe must press the heel, and the ankle must be tightly covered by the top. If all these conditions are observed, and at the same time you feel yourself in shoes convenient, it means you found your own pairs of skates.
Video tips on choosing figure skates from the trainer:

What better to buy walking skates

If you will ride for pleasure and are not going to professionally play sports, then the ideal option will be a walking skates. These models are suitable for both the child and adult. In addition, they use bright and beautiful designs for them. Many walking skates have an inner warmed bootball, which, if necessary, can be pulled out for drying.

The criteria for selecting pleasure skates are the same as for figure models. You must feel comfortable in them, and the shoe should make a tight leg.

What skates to buy for hockey

Hockey models of skates are more suitable for men. At the same time, they are all divided into amateur, semi-professional and professional models:

• Amateur skates have a soft shoe, they are suitable for beginner athletes. From the elements of protection in these models there is only a plastic thought that protects the fingers. There is also no additional shoe adjustment.
• Semi-professional kons buy for hockey with a washer. People often playing and wishing to improve their level. It provides more qualitative protection with hard tongue and reliable support for sides, which is provided by rigidity ribs. In some semi-professional class models there are special features for adjusting the boot under the anatomical features of the leg.

When choosing hockey skates It should be borne in mind that they do not meet the standard sizes of shoes. Therefore, they must be measured. In a suitable boot, the leg should be comfortable. The back of the shoe should press the heel tightly, but the fingers should not be pressed to the sock, but only slightly touch it.

Boots for hockey skates differ also in the width of the blocks. Therefore, if the boots are suitable for you in length, but not in width, you should just measure the other pair.

How to choose skates to a child

The kids who are just started to get up on the ice are ideal for two blades. Such skates are stable and the child will feel confident about them. Then you can purchase a conventional model with one blade. It is best to choose curly skates for children, allowing good to fix ankle.

With the fitting, you must put the baby thick woolen socks. The ideal option when an adult finger can hardly be inserted between the boot and heel. Too close boots will be uncomfortable when skating, and in the free risk increases the ankle.

The value from which children's skates begin, it is the size of 28 Russian. At the same time, consider that for novice children it is permissible to buy skates per 1 size more than needed. For young hockey players, skates must be purchased on the size more than necessary. Children for ordinary walking skating can be advised by sliding models that change along the length of the boot for 3-5 sizes.
Video tips on choosing children's skates:

Quality skates rating for men

After consideration of the main types of skates, their features and the rules of choice will not be superfluous, what popular models are now leading on the market. This will help to decide on the choice and consider which company it is better to buy skates.

Bauer Supreme One.4.

These skates are treated for hockey models, they can be recommended for athletes of any level. The shoe is made of high quality nylon, and an internal microfiber lining with water-repellent properties. In these skates, the athlete feels confidently, thanks to dense foot fixing and reliable protection on the sides. Ultralight foam inserts are provided for the defense and support of the ankles.

For optimally convenient location of the leg during riding, special caliper heel and tongue are provided. Additionally, it is worth noting a high-quality sole of compressed plastic, as well as a glass with a blade of high-quality metal.

Bauer Supreme One.4.

Advantages:

• little weight;
• boots have quite good rigidity;
• durable;
• create excellent security;
• tightly tight legs;
• the tongue has an anatomical form.

Disadvantages:

• laces need to be changed, as they are low quality.

Cost: from 8990 rubles.

Bauer Vapor X400.

This model is designed for beginner players in hockey. It can be purchased by the owners of the foot size from 26 to 46, including completeness D and EE.

The top of the boot is made of nylon, the inside is from synthetic fabrics, which together guarantees good moisture. The plastic sole, the blade is made of stainless steel.

Bauer Vapor X400.

Advantages:

• Comfortable landing due to the availability of an anatomical language and inserts to the ankle;
• Blades replaceable;
• The foot in the boot does not sweat.

Disadvantages:

• With enhanced exploitation in the frost, there is sometimes crackling of the sole.

Cost: from 4500 rubles.

Skates are positioned by male, although the size range allows you to try onto a female leg. You can choose a pair of size from 32.5 to 46th. The NSX series is created by the Bauer manufacturer for those who are in hockey - newcomer.

The boot is made of composite material, interior decoration - synthetics. Sole plastic with attached stainless steel blades.

Skates can be operated as on closed iceAnd on the street rink, thanks to a frost-resistant glass.

Advantages:

• The presence of anatomical liners and, as a result, a comfortable fit on the leg;
• Ankle support;
• Reinforced sock;
• Boot anatomical.

Disadvantages:

• Available on one completeness, and therefore, they will not fit the widespread foot and high rise;
• The laces that are coming in the kit have excessive elasticity, "pulling" and the property to be laid in the palm of intensive lacing.

Cost: from 5,700 rubles.

GRAF Super 103 Sakurai

These skates of the hockey model are designed for boys and teenagers. The upper part of the boot is made of high-quality combined synthetic tissue. The inner part is made of microfiber and creates soft foot support. A reinforced protection against low temperature is provided on the nose. Insoles firmly adjacent to the legs and have the ability to adapt to the anatomical features of the owner.

GRAF Super 103 Sakurai

Advantages:

• warm and comfortable lining;
• reliable leg support;
• insoles have an anatomical structure;
• it is well protected from frost.

Disadvantages:

• assistance is needed when tying shoelaces.

The average price: 3890 rubles.

For beginners in figure skating and middle-class professionals, this model of curious skates is most appropriate. Boots in this model are entirely made of genuine leather. Over time, they take a form corresponding to the leg of an athlete.

For comfort on the inside of the shoe, special softening inserts are made. The lining absorbs moisture well. The lacing is decorated with a special neckline, designed to prevent the formation of folds and creates the most correct legation of the leg during riding.

Advantages:

• leather boots;
• convenient anatomical structure;
• anticorrosive blade coating;
• differ in a long service life;
• suitable athletes of male and female.

Disadvantages:

• time is needed so that the boots adapt to the shape of the leg.

The average price: 2450 rubles.

Rating of the best female skates

These skates are designed for girls. The top of both sides is made exclusively made of genuine leather. This contributes to the best maintaining heat. The blades are made according to certification standards from high-quality stainless steel with corrosion treatment, last time saved sharpening. The boot has an extended shape and perfectly supports the child's ankle in the riding process, which is useful for preventing injury.

Boots are decorated with a stylish pattern, which will surely appreciate young figure skater. From above, lacing is supplemented with hooks, creating perfect leg support. The pad of medium stiffness allows you to comfortably feel at riding even with a thick sock.

Princess Kid Sports Collection

Advantages:

• comfortable model;
• beautiful design;
• natural materials;
• excellent foot support;
• blades made of quality material.

Disadvantages:

• it is necessary to carefully try on purchases.

The average price: 3230 rubles.

This is a walking model for women, it is characterized by a slight weight, which allows you to unload the legs. This model is characterized by a pretty appearance in white and gray tones. Boots have a soft pack and create ankle good support. All this creates convenience and comfort when riding.

The shoes are laid on the laces, there is also a strap with velcro at the top of the shoe.

Advantages:

• low weight;
• cute appearance;
• comfort and heat when riding.

Disadvantages:

• require a careful relationship.

The average price: 5200 rubles.

A significant advantage of these skates is the use of skin as a material of internal and external finishes. No insulation makes this model more suitable for riding on closed ice. The sole is made of plastic, blade - stainless steel.

The manufacturer positions these skates, as for professionals. Size range - Wide, from 25 to 42.

SC (Sports Collection) Princess Lux 100% Leather

Advantages:

• Comfort for legs due to natural, non-frozen material;
• Foot skates do not sweat;
• Good fixation on ankle.

In this article, we will look at the features and differences in hockey skates from all other types and how to choose them.

At first glance, all hockey skates are the same if they can somehow be distinguished from figured, then each other does not face the difference.

Let's start with the fact that ice skates are hockey and "hockey" in quotes, that is, externally similar to real, but not suitable for hockey, and suitable rather for a measured slip for the sake of rest. Boots for such walking skates are usually made of synthetics, leatherette and artificial leather. Such a boot will not protect you from the blow of the washer and will not prevent injury, since all the protection is reduced to the hard mailed, which at best will save from the blades of other rides. In general, the shoe itself is pretty soft and convenient. You can ride in your pleasure pretty and comfortable. Such skates are inexpensive at the expense of cheap materials, and therefore often distributed at the points of rolled skates.

Hockey skates

Real hockey skates, designed for sports, are much more expensive. The easiest option for beginners in the midst of the season is at least $ 100. The main feature of hockey skates in the greater boot rigidity, which provides good fixation of the ankle joint, and therefore reduces the risk of injury at times. The rigidity of the boot depends on the material of the manufacture. Most often hockey boots are made from nylon, as well as plastic or foam elements in the boot composition. Even a tongue in hockey boots, though soft, but much stronger than at the walking skates.

The more expensive boots, the more perfect. Often you can install both the blade for beginners in sports and an advanced level. This makes it possible to choose a model that meets the desired quality requirements and price.

In advanced boots of the price category from $ 150, various improvements appear, for example, thermoforming in the shape of a leg, foam inserts, storage silhouette and simplifying addictive boots, camera with air swap, protection of the tongue, additional side protection, metal mesh in the external finish, Sole with ventilation and much more. Well, and the professional boots, the more tougher, but lighter by weight.

Consider some of the voiced chips in more detail.

Termoformovka allows you to sit down clearly according to the silhouette of the owner's foot. Of course, she does not customize all the skates to all legs, but only makes it already exactly suitable boots more comfortable and perfect in shape, which reduces the time of adaptation, reducing no corn, scuffs and other inconveniences. How is it done? The boot contains material (foam or plastic), which is softened when heated, and cooling, takes the necessary shape and hardens.

To warm up the thermoplastic material, the boots are put into a special stove for a few minutes. Then the owner put on softer and flexible boots put on, lashes and waits for 10-15 minutes, until the shoes take his individual outline. Skates are sitting, as they are called, as they can do: they do not need to additionally ripen, they will not hug anywhere and do not rub. Such a process can be repeated several times and not for the entire shoe, and for its necessary part, for this you use the necessary tools.

Thermoplastic skates cannot be stored in heating and heating devices, as well as after the forming process, the temperature is not recommended than 40-45 degrees.

Air chambers with swap located just above the bones inside the shoe, it is looking ankle jointAnd the mini-pump is located on the surface of the boot - the so-called frog, if you press it into it, then the air goes into the chamber, due to which the shin is covered stronger and is fixed more reliable. Such a PUMP technology was used by Reebok in sneakers in 1989.

Lowing lock - This is a special mold of the loop, fixed between the upper lacing zone and the boot lift. This design allows you to gear the upper and lower part separately. As an option, you can fix the shin of pouch by tightening top, and the bottom weakening is not to transfer the leg. This technology can be found on the skates of the middle and above class from CCM and Reebok manufacturers.

In the next price layer from $ 300 boots become even more faded, the struggle continues to minimize weight and increase the degree of protection, technologies are improved: carbon, kevlar, tongues become more anatomical and heat forming, tongues appear with a spring, which gives part of the energy during the shock , Metal inserts on the sole, up to composite boots that are completely molding.

The top plank on such models of serial production can be about $ 1000 per pair (Bauer Supreme Total One / Vapor X: 60).

Blades

Hockey skates, in addition to the boots themselves, consist of their metal blades (Runner), which are fixed in the so-called glass - a special plastic holder (Holder). The glass in turn is applied to the sole of rivets or screws. The blade can be removable, and can be attached to the boot on life. Each manufacturer offers its blade mounting scheme.

Plastic from which the holder is produced may be varying degrees of strength. But in any case, he must cope with the flocks of washers, other people's skates, clubs. Therefore, manufacturers are looking for a golden middleness between the strength of the material and the weight of the skate, this explains the presence of holes in glasses to reduce weight.

Modern blades are not just a piece of metal, they have a number of important characteristics that need to pay attention to.

Pleasure skates have ordinary blades that are a strip of stainless steel, often soft enough, usually fixed. Clear manufacturers often make a note "Stainless", which means stainless, but they themselves explain in the skate guide, that they need to wipe the covers with a dry cloth, to remove the covers and wipe dry again. Failure to comply with such events will inevitably lead to the appearance of traces of rye on the blades ().

One of the most important properties of the blades - their hardness. This affects the frequency of sharpening skates. Judge for yourself: inexpensive skates with soft stainless steel, no more couples of energetic riding days, the blades of the middle price category will work at the same pace about a week.

Alternative to stainless steel - Carbon - Carbon Steel. She meets in an inexpensive segment, of course harder, however, it is recommended for skates with such blades even more carefully and in no case forget about them before the next pokatushek and not leave raw.

There are also skates intended for artificial ice (often found in large sports stores and entertainment centers, instead of ice - plastic), they are marked with the inscription "S.I." (Synthetic Ice). The blades are made from high carbon steel, and the hardness (~ 60 HRC) is comparable to the files. Sharpening on such skates when sliding ordinary ice It remains for a long time, but they are intended only for rolled products, therefore it is not necessary to wait for special delights and technical bells on them. Conventional blades are not suitable for synthetic ice, since it is blown up after a few minutes of slip.

Hockey skates for beginners do not differ in principle from pleasure, only steel blades are extensive. Often there are already branded marking in contrast to the nameless "High Quality Steel" or "Stainless Steel Blade". Blades are made of stainless steel or carbon steel. Each manufacturer is different. Practice shows that GRAF budget skates (Cobra Pro-2000) less often need sharpening compared to CCM / Reebok classmates and Bauer.

Skates from the mid-season segment can already have removable blades. Steel is usually qualitative for all manufacturers, so during the purchase it is necessary to pay attention to the design of the fastening of the blades in the glass.

The most common option is to screw up two screws on the side, it does not require professional skills and equipment, conveniently, makes it possible to replace the blade without removing the horse. The disadvantages of such a scheme include the probability of arbitrary twisting and loss of the screw in the process of slip, which requires regular control and pulling fasteners. Such a system uses CCM / Reebok, Easton, Torspo, Mission, Mission.

By the way, the latter uses Pitch 3 on the middle and expensive models on the blades and glasses, that is, using a screw in the fixing scheme, it is possible to change the heel height, fixing the depth of fixation of the blade in one of the three positions. So you can establish a horse for yourself and experiment with a combination of shoes - blades. Here are some of the combinations for the pitch 3 blade:

PITCH -1 \u003d BAUER + TUUK
Pitch n \u003d graf + tuuk / CCM + PROLITE
Pitch +1 \u003d graf + Cobra

The following fasteners circuit consists in the grip of the blade with a glass with a special hook in front and screw in the back. The screw at the same time penetrates the back of the glass perpendicular to the surface of the ice. To get to this screw, you must pull out the insole. In particular, this attachment scheme is found on Tuuk blades.

As we have already written above, expensive models weigh less due to special holes in the blades. However, the top models did not stop at this, only the bottom of the blades remain with steel, and the rest is made from plastic (CCM Rocket Runner) or aluminum (Tuuk Lightspeed Fusion Runner).

There are also extravagant fastening compositions, such as the T-Blade system, which occupies its niche on the market. In this design, the metal is in a minimum, in particular the steel section, has no weight of no more than 6 grams and a thickness of 1 mm. The remaining parts are mostly produced from plastic or composite materials. This facilitates the T-Blade construction by 20% compared with the familiar lightweight blades.

This system consists of an openwork glass of plastic or composite, the blade from the composite is screwed to it using a pair of such openwork plastic crossbars and fastening screws. On the working surface, a six-gram edge of high-class steel is recorded. The quality of steel extends the period without sharpening 3-5 times compared to conventional blades. If the blade becomes stupid, it can easily be disconnected and screwed up new with factory sharpening. Sharpening is almost perfect. You can choose sharpening profile during purchase. In such a design, repeated sharpening is not provided, since the metal strip on the end of the blade is too thin and heated during the sharpener, which leads to the melting of the composite.

But they slide such blades by more than a third better than ordinary. This is associated with everything with the same heating - with friction about ice, the temperature of the steel rises at 3-4 degrees more than the environment and squeezes the ice slightly, which affects the quality of sliding. A more flexible blade material adds maneuverability to turns and when performing some elements. This composition may seem fragile, but according to the manufacturer's assurances, it is able to withstand the punch at minus 30 degrees. T-Blade technology is found at different times of many popular CCM, Bauer, Graf, Botas, and K2 brands.

The discharge of non-standard blades includes the design of Thermablade. It is already clear from the name that the temperature is directly related to the process. Visually, these blades do not distinguish from ordinary. However, if you hold the blade in the area of \u200b\u200bthe heel rack during the pair of troika seconds, the indicator will flash inside it, meaning that the blade ... start working. The glass contains a special battery (charging and docking station are included in the kit) and the electronic circuit, and the heater is installed on the blade. As soon as the process is running, the blade is heated and its sliding characteristics are improved.

Thermablade technology practiced NHL players, but they decided to abandon it, because the reviews were contradictory, but there is no ban on its use.

Selection and fitting

When choosing skates at the head of the corner, you need to make the convenience of shoes and pads. After all, no frills and technological improvements will help, if somewhere it will be crushed, rub and roll into flour, and not pleasure. After you have found your size, pay attention to the rigidity - one of the most important characteristics of the boot. Remember that in real professional versions it can be comparable with an 8-mm plywood, and if the foot is not prepared for this, do not wait for anything good. Squeeze the latter and index fingers of the junction loops at the top, located against each other, so you can present the stiffness of the shoe, even without trying it. If the loops easily went to meet each other, and the shoe was laughed like a cloth, then you keep in your hands a clearly pleasure option. If the boot is not so easy, but still crushed - these are boots for newbies hockey players. If the upper loop never managed to connect - this is a semi-nailed model. Well, if the edges of the boot did not even foolish - these are real hockey professional skates. This is certainly not a versatile way of checking skates, however, it will serve as a good help with the orientation for the price.

If you are new and looking for your first skates for learning and relaxing on ice, then take a closer look at the walking skates and skates for newbies hockey players, in particular, to the initial model of GRAF (Super 101/103/105).

If you intend to constantly and actively ride or seriously think about hockey at the amateur level, then the walking skates will not suit you, since their rigidity is not enough for good protection, the foot is not recorded properly, which can lead to deposits when fast movements. Over time, when the shoe starts to sneak, rushing, it will practically be a sense of it, simply because these skates are not provided for such a tempo and character of maneuvers: can break the plastic back, and the pseudoclayer will simply be broken. In addition, the lacing weakens with energetic skating on the riding skating, which leads to the need to periodically laugh at the foot to the foot to ensure fixation, and this is harmful to the blood circulation of the foot. The leg can freeze on the open rink, even if you are in woolen socks. The reinforced lacing is dug in the leg, as such skates have a soft tongue. Well, of themselves, during the game of hockey, hard maneuvers are inevitable, puck, plexus with other people's skates, and the lack of stiffness of the boot will not be able to protect you from it. So think about inexpensive hockey skates. For example, Reebok 1K seasons 2007-2009.

Well, those who do not see themselves without energetic actions on the rink, in the measure of aggressive pokatushek and active games In hockey, skates for newcomers will not work due to excessive softness, so the choice will have to do from more expensive options. You can pay attention to the Bauer Flexlite line.

Be that as it may, the choice is yours: you need to go and measure, measure, measure, in the end you will find your horse.

It will not be superfluous to add that many companies in their middle and higher at the price of rules offer some skates with different optionsto: ordinary, for high lifting of foot, low lifting or for people with flatflower.

During the fitting, put on the boot, find a comfortable one's heel and only then lace. Socks are put on those in which they intend to ride. For indoor skates, you can wear thin, for open - thoroughly. The leg in the boot should be comfortable, nowhere should not put anything, rub, squeezing, fingers should not be tightly tight to the shoe's wear, otherwise they will freeze.

Sitting in laced shoes, you will not understand, comfortable in them or not, moreover, it is fraught with a stopping of the foot. So be more active, catch the store, hurt, check how clearly the foot is fixed, can maneuvers be performed. The tilt of the leg forward is limited to the flexibility of the shoe and the lacing height. If you fundamentally quickly gain speed and quickly start, be movable - leave the upper holes in the lacing blank, but it is important to understand that at the same time the side support will suffer.

If the upper loop of the lacing pressure puts on his leg, you need to either weaken the tightening, or look for skates with a thicker tongue. If you intend to move a few steam of skates, it is better to immediately ask a special hook for lacing, otherwise you can tear the skin.

The choice of the blade will become relevant if you ride constantly and energeticallyIn other cases, conventional blades will rise. Removable blades should be considered less experienced players in amateur hockey, well, or those who are too often sharpening skates, which leads them into disrepair.

The same with glasses. The burst glass must be selected based on the purpose of the skates. If you have done dashing maneuvers or got a punch on a walking skating, it is not surprising if the glass is simply not cope with it.

Among other things, the glasses should be frost-resistant. This is especially true if you refer yourself to fans to play frost below 10 degrees, since any durable plastic becomes fragile at such a temperature. The Tuuk models from Bauer, Graf Ultra Light 5000 and Cobra NT-3000 are well proven well, and no less famous Tuuk Custom + are already intended for indoor rollers.

When choosing a glass, problems may arise due to the fact that the heel height where it is located, various manufacturers are different. Tuuk's striking fame won well, this explains the staff of the skates of other firms, for example, graf.

Buy the T-Blade blades makes sense if you will ride with impeccable artificial ice, where you can reveal the potential of these blades. It is necessary to figure out the radius of sharpening and the length of the blade. If you know exactly what you rarely leave the roller limits somewhere in the CPKIO, then it is worth a pretty think about the need for such an expensive purchase.

Well, finally, the blades, avoid acquiring the goods of an unknown manufacturer, performed not clear from what and where, and then when skating on ice can happen it is unknown that.

Sharpening hockey skates.

It is only briefly mentioned here that the newcomer is not for nothing to understand in the fineness of sharpening. This service, as a rule, turns out to be in most rolling rollers, can also be asked to sharpen skates in a specialized store when buying new skates.

Updated: 04.10.2018 16:29:03

Expert: Sergey Vorontsov

* Overview of the best editorial board. On the selection criteria. This material It is subjective in nature, not advertising and does not serve as a guide to purchase. Before buying, you need consultation with a specialist.

When you watch the ice hockey players, send yourself to the thoughts that high-speed attacks and powerful jerks ensure the performance of the game. All this gives not only excellent physical training Athlete, but also a properly selected equipment, where the most important element are skates. The design of hockey skates should provide predictability in any situation on the field.

Despite the fact that hockey skates look at first glance, if you do not count the differences in colors, the difference still exists. Among the models there are similar on the design of hockey skates, but absolutely unsuitable for a serious game. Motored models made of artificial leather or synthetics, and all the protection is reduced to the presence of a rigid mission. Such boots will not prevent injury and will not protect the washer from hitting.

To help readers with a choice, our experts talked to specialists and players by learning what the requirements should be answered by hockey skates. Based on the information received, a rating was compiled, including 6 best models Skates for hockey players.

How to choose hockey skates

1. Skill level. Relieve yourself from the tasks. Being a newcomer, it is better to buy skates for beginners. The initial models are perfect, for example, GRAF firms. Those who want to actively ride or engage in hockey at the amateur level should look at the inexpensive semi-professional hockey skates, which are made of durable materials and protect the legs from the flocks of washers, blades of other people's skates, cold. Professionals do not fit the models for beginners and lovers, because due to insufficient hardness, they will quickly come into disrepair and will not provide the necessary level of protection with active / aggressive skating. Choose such athletes need advanced hockey skates from all other price categories.
2. Rigidity. This parameter is responsible for ensuring the reliable fixation of the ankle joint, which, in turn, minimizes the risk of injury. Pay attention to the manufacturing materials of the boot. They should be highly high quality and durability. Even the skating tongue for hockey will be much harder than pleasure models. It is worth remembering that the more professional hockey skates, they are tall, but lighter by weight.
3. The presence of thermoforming. Such boots have special foam or plastic inserts, memorizing an ankle athlete due to heating, softening and subsequent solidification. The thermoforming is faster than the process of addiction without the appearance of corns and holotoids. After heating the skates in a special oven, the owner puts them for 10-15 minutes to remember all the contours. You can not store shoes with thermoplastic material near the heating / heating devices, and it is also not recommended to exceed the ambient temperature above 45 degrees.
4. Air chambers with swap. They are located inside the skate and shink the ankle joint. Outside of each boot there is a pear for air injection. If you press it on it, the air will begin to enter the chamber, which will ensure more reliable and strong fixation of the lower leg.
5. Laceclock with locks. The special loop is fixed between the rise and the upper part of the shoe. Such a system makes it possible separately to lax the lower and upper part, choosing the required level of the tightness for each. We need a similar design only in semi-professional and professional hockey skates.
6. Glass. It should be frost-resistant if you plan to ride on open ice arenas at temperatures below 10 degrees. It was then that any plastic, from which a glass of the skate is usually performed, becomes fragile and can be easily crap. Conventional glasses are suitable for indoor rollers.
7. Blades. It can be interchangeable or installed once and for all. The models for beginner blade are relatively mild and is a stainless or carbon steel strip. To sharpen such skates often, if a day or two actively ride, and if measured, they should be enough for no less than a week. For semi-professional and professional, blades of steel are also used, but significantly more rigid with perforation to reduce the weight of the product, and less frequently needed in sharpening even after many hours of riding.
8. Fastening blades in a glass. Screws on the side allow you to change the blade without removing the shoe. It is also possible using a screw to adjust the heel, fixing the depth in one of the three positions. The disadvantages of such attachments include arbitrary unscrewing screws during slip. The deviation of the screw to the heel used by some manufacturers facilitates access and eliminates the need to remove rolling.
9. Slip.Dear professional models have minimum steel. This is usually only the lower part, which directly contacts the ice. All other elements are made of durable plastic and aluminum. The T-Blade system with a six-rigid steel edge allows you to increase the slide rate, since when friction, the temperature increases, which leads to ice melting. There is also a non-standard Thermablade system with batteries in glasses for heating blades. At one time, such hockey skates practiced NHL players, but due to ambiguous reviews it was decided to refuse, although they still remain on sale.

Rating of the best hockey skates

The best hockey skates for beginners

In the first place in the rating category Hockey Skates with a comfortable broad Wedge EE. The low-profile sole is made of nylon, and the HRC50 stainless steel blades. Anatomical insole with perforation for better ventilation. The model has a microfiber liner and a reinforced tongue from EVA material. A glass of frost-resistant, so skates can be used on open ice arenas.

Dignity

• shape memory boot;
• interior decoration made of synthetic fabric;
• high quality sewing;
• price-quality ratio;
• wide dimension line - from 39 to 46;
• acceptable cost - 6500 p.

disadvantages

• not found.

The second line goes to hockey skates from the famous Bauer company. The model is characterized by maneuverability, high dynamic characteristics and good degree of protection. The glass of the shoe is lightweight, but despite it withstands increased loads. It is frostable, suitable for skating outdoors. Improves leg support built-in ankle caliper. The shoe sits on the leg tightly, thanks to anatomical block (Anatomical Heel Support). The blade is unburd, made of stainless steel with a moisture-repellent additive.

Dignity

• thoughtful shape;
• reliable fixation of ankle and heel;
• low weight;
• fullness r;
• acceptable cost - 5 thousand rubles.

disadvantages

• require frequent sharpening (after 3-4 riding);
• weak plastic.

Top semi-professional hockey skates

The first are hockey skates with individual adaptation. The sidewalls of the boot are made of thermoform composite, which guarantees the maximum accurate repetition of the feet shape of the athlete. Anatomical insole Form-Fit + provides stabilization of the foot. A tight language from felt has reinforced foam overlays. Anatomical Heel Support guarantees reliable boot landing. Effective ankle support increases stability, contributing to rapid acceleration.

Dignity

• glasses with rapid replacement blades;
• fast response to movement;
• lightweight sole of Clear Injected TPU;
• quick-drying Hydrophobic Microfiber lining.

disadvantages

• horregious - 15500 r.

In the second position of the skates for hockey with reinforced sidewalls for best protection. There is a possibility of partial thermoforming of the boot. The semi-professional model provides excellent landing, according to users. The blades are made of high-quality carbon steel.

One of the favorite entertainment in winter - skates. Many people spend evenings on rinks. Lovers of ice entertainment sooner or later will have to think about acquiring their own skates. And there is a number of reasons. However, newcomers are concerned about the question: "How to choose skates for beginners?" After all, this is a purchase for several years.

Why it is worth buying your own skates, and not to use rolling

• Hygienicity. In the boot there will be only a foot of the riding, therefore, the risk of infection with fungus is absent.
• Do not have to sweat in polyethylene packages that offer in many rides instead of hygienic sock.
• Skates will be selected exactly in size and over time they are packed under their owner.
• There will be no binding to Ice Arena with rolled products. Often small free platforms are equipped in the courtyards and parks. However, there is nothing to do there without their skates.
• With frequent visits to the roller can take an impressive amount for the use of shoes.

The main reasons are clear. The only benefit of rental is: here the newcomer can decide that he is more like (or on the leg). Even a little experience will help solve the question: "What to choose skates for beginners?"

Skid varieties

Probably, everyone paid attention to that the shoes of the skaters are not as at hockey players. Skates of the latter differ greatly from speed skating, etc. For each sport, its shoes are suitable. Depending on the type of load, different blades are used, sharpening methods, even the appearance of the boot is highly different.

There are 3 main types of skates: hockey, curly and skating. Also, this list is often complemented by amateur (or pleasant) and children's. What skates are better for beginners? To answer this question, you need to consider the features of each type of ice shoe.

Hockey skates

Everything is directed to the protection of the legs. Everything is aware that hockey is a rather aggressive and traumatic sport. Here are punches with a stick or on the board, it happens that the washer beats her leg. Shoes should protect the player from all these troubles. Therefore, comfort is often sacrificed. Hockey skates are rather solid, they are made of synthetic materials and have rigid inserts in the most open places. They have always reinforced sock (it is made of plastic). On the other hand, a hard boot ensures good support for the foot and ankle, fixes the leg in the right position.

Another requirement that makes a game for shoes - speed and maneuverability. Therefore, the blades of the skates have an arc shape, there are also no teeth on them. This allows not to cling to ice even with very sharp reversals. The smaller the area of \u200b\u200bcontact with ice, the maneuverable player. However, equilibrium will be harder.

How to choose skates for beginners to play hockey? If you plan to ride out open rollers, then you should not buy professional shoes. It is designed for temperature to - 5. With severe frosts, the outer layer can crack. For street games it is better to choose models from semi-professional and amateur collections. This shoes are able to withstand 20-degree frosts without the slightest damage. In addition, they are insulated, unlike professional. They are invested with a warm insole, the edge is sewn, there are tabs that protect legs from frost. You can ask the sellers in the store, which skates for beginners will be optimal.

We like the results. This is not the most suitable option for beginners, since to keep the balance in hockey skates is quite difficult, so there will be many drops first. But if a person is going to run on ice with a stick, then you need to start in the appropriate shoe. If you already have a certain experience, you can safely buy hockey skates, since it is in them that you can perform various reversals and some tricks, develop most speed And quickly drop it. In other words, they provide greater freedom of action.

Figure skates

Provide greater ice stability due to a long direct blade, which protrudes over the heel line by 2-2.5 cm. In front There are teeth, allowing you to get up on tiptoe and perform steps, jumping and complex pyruets. However, it is this element that delivers many inconvenience to beginners. Teeth can cling to uneven ice street rollers, which often leads to drops. But in all the rest of the skates figured for beginners - the best option.

Produce leather boots or substitutes. It provides a tough fixation of ankle, which will save from many injuries. However, skates are fine. As a result, riding frost is cold. The problem can be solved using warm thermal insulation socks. The shoe is high, with dense lacing, which facilitates control of movements.

How to choose skates for novice skaters? You should give preference to shoes with a sole of genuine leather. She absorbs moisture perfectly, which is very important with long-term skating.

Before buying, you should check the blades: they need to bend a little and let go. Metal must return to its original position. If the bending remains, the material is used poor-quality, it is better to choose another pair.

Pleasure skates

One of the most long-sided types of shoes for skiing. Models can be similar in appearance on hockey, curly or roller. However, they differ from all softer and warm boots. Blades can repeat the shape of hockey, but in this case the arc will not be steep. Or curly, then the teeth are or very short, or they are not at all. These skates are designed for those who plan to simply ride and enjoy a unhurried ice walk, and not drive with a washer or leaning complex pyruets. In general, the option for most visitors of open skating rinks.

Pleasure skates are designed for riding with comfort, so the boots are softer. The lacing can be classic, and the babble can be used, like the rollers. Then soft boots will be combined with plastic. However, the fasteners can break, and it can be replaced only with the skate. The walking shoes were originally designed for large frosts, so you can ride any weather.

However, elevated comfort leads to the fact that the ankle is not so rigidly fixed, and this increases the risk of injury. Also, a soft boot imposes serious restrictions on the possibility of performing pyruets, jumps and other complex elements. All these features need to know to decide which to choose skates. For beginners are quite suitable for pleasure.

Children's skates

The kids are offered shoes with a wider and most resistant blade. Double passes can also be used. These are the best skates for beginners to ride under the age of 4-5 years. When a child is a little comfortable with a new way of movement, you can buy shoes with a normal narrow blade. In this case, you can use children's sliding skates. The appearance of them resembles amateur. They are suitable for easy ice riding. The stock of sliding models is usually 3-5 sizes.

If the child plans to more thoroughly ride, then it is better to immediately select curly or hockey skates. Depending on the selected sport. Valid reserve - no more than 2 sizes. Otherwise, the shoe will hang out on the leg, which will lead to injuries.

Lacing

It is necessary for fixing the legs in the boot. Reliable lacing distinguishes skates for beginners. Children may be interested in bright multicolored laces. After all, they are so nice and interesting to tying! But optimal solution - Ordinary cotton shoelaces. Synthetic will be untied, especially in the cold. Clasp can not be adjusted, and they are rarely located. Well, if the lace holes are located often. This will ensure reliable fixation and will save from injuries. A good option is a combination: Buckly is located at the very top, and the rest controls the lace. The shoe must sit tightly, but not to handle the leg. Check the lacing quality is simple: you can sit in the shoes and do not fall back. Here, in fact, everything you need to know about how to pick up skates for beginners.

Sharpecker

New skates are usually stupid. Before you start riding, take them to sharpening. Do not try to do it yourself, since the procedure is performed on a special machine.

There are 2 methods of sharpening: under grooves and flat stone. In the first case, maneuverability is provided, the horse can go on the edge, on the turns he "bits" into the ice. In the second case, the surface of the contact with ice is more resistance. This is suitable for newcomers. Then you can recover under the groove.

• The store needs to go with and try shoes with it. Only so you can find the perfect size.
• Children can not buy too big skates. The stock is a maximum of 1-2 size. If there is no desire to change them often, then you can purchase sliding.
• To understand whether skates are suitable, you must be launched completely.
• Surrender preferably several pairs. Then it will be clear which shoe fits the leg.
• To understand whether they are comfortable in skating, you need to look at them, to pectine.

What skates are better for beginners or on how to stop

This variety is easy to get confused. Therefore, before selecting skates for beginners, you should decide what type of riding is closer. And already repel from this. So, if Ice Batals are planned with sticks and a washer, then you need to buy hockey skates, since no others are able to protect your leg and blows well. For the execution of pyruets, jumps, the discharge of complex shapes are used only figured. The rest will not be able to provide adequate sustainability and fixation of the ankle. However, if there are no special plans, it will be enough for pleasure.

It makes no sense to buy expensive skates for beginners. Children will not stop any price tag: the leg will quickly grow. And the amateur is unlikely to visit ice so often. For beginners to ride smooth and smooth arons, curly skates will be the optimal choice. For street ice, hockey or pleasure with tight fixation of the ankle are suitable. This will avoid injury and teach the leg to keep right.