For fisherman, not only the quantity, but also the quality of caught fish. Who wants to brag a small fish. Often big fish It goes away from the opportunity to be caught using strength.
If the hook is poorly fixed, then there is a high probability that the fish can easily break the hook, leaving you the fishing line instead of catching you. Fishermen know that to eliminate this kind of situations, you need to choose the proper node that the hook is attached to the fishing line.
Moreover, professionals also take into account the type of fishing line, and the size of the hook during the selection of the node. The ability to qualitatively bind the hook is especially important for newbies, so as not to miss your first trophy catch.
What are the requirements for fishing nodes?
Every year, professional fishermen invent all new ways to knit nodes tested by them. The node always loosens the strength of the alkali and therefore it is possible to break the fishing line.
Incorrectly knotted knot can lead to a decrease in the strength of the vein in two or three times, which is why it is worthwhile to knit knots with minimal damage to the fishing thread.
Nowadays, thanks to scientific and technical progress, and the emergence of all new compounds, there are fishways that do not reduce their strength. At the same time, some of them can reduce strength no more than 2-3%.
For fishing on of different types And the weight of the fish must be very carefully picking the type of fisherman's fisherman and the size of the hook. Depending on the individual features, select the desired type of node, which are designed under a certain type of fishing.
Knit a universal node!
The universal node is so called, since it is quite universal for the beginner.
The ability to tie it will free you from the need to study others, as it is equally suitable for hooks with an eye and without, right then it knits a little in different ways.
If there is an eyelet, then at first the thread is done through it, otherwise - they are placed in parallel, and the free fishing line turns 5-7 times with a circle with a fishing line.
The turns need to be placed tightly to each other, but not allow them to overlap.
When wrapping the main fishing line is worth watching it to be well stretched.
When the main fishing was finished with wrapping, the free end stretches through the looping and the neto is delayed.
The knot turns out to be in the middle of the Tsevaya, so it needs to be turned to the eye and check the quality by pulling out the hook - the fishing line should not break.
Palomar - knot for space
The Palomar knot is so simple in knitting and practical that even children will cope with him. The only inconvenience with which you may encounter - do not get on the hook without a ear.
Initially, you need to stretch the end of the fishing line through the ear, pre-folding it twice. Next, a simple nodule is tied, but it is not delayed, but it has been done through the hook and is very tightened.
The strength of such a node is 80% and preferably used it for fine and medium fishing line.
Tips for tying this node:
- to improve the quality of the node, before tightening the fishing line it is necessary to moisten;
- for this type of node, it is better to choose a hook with a big rings, To turn normally twice the folded line.
Node "Sliding Snood"
The Sliding Snood fishing unit is based on the Snood assembly and is characterized by the fact that it becomes a separate fishing line to the main, and due to it does not affect it. Bind the hook in this way you can fly any thickness to the fishing line.
This node is used if you need to bind an additional hook above the main and without using the leash.
We cling the hook with a turtle node
The turtle knot is designed to catch a large fish. Legend says that the name went from Australian fishermen who caught large fishand sometimes clinging turtles, weighing up to 30 kg, and the knot kept.
This node is designed for use with thick fishing or twine, because on a thin fishing line the knotted knot can unleached. It is noteworthy that the node is designed in such a way that excludes the possibility of the coat of the hook.
Non-profile shark node
Akuliya Knot is distinguished by a strong self-tight loop.
This node appeared quite recently and is characterized by a narrow area of \u200b\u200bapplication, but already won the love of professional fishermen, as well as fishing teams, as it is distinguished by enviable practicality and durability.
A node in fishing sports or fishery, fishing ships.
A knot is tied on a synthetic fishing line or a rope made of elastic fibers, therefore, it has gained great popularity, due to the growing popularity of fishing threads made on a synthetic basis.
Gripping knot - even children will cope
The gripping knot is a fairly simple fishing knot. In addition to the opportunity to attach it of various types of gear, you can not worry about the choice of a suitable fishing line - in this matter the universal node, and is suitable even for a nylon thread.
It occurs from a complex snake knot, which sailors bind the cables. This node earned a reputation very reliable.
Tuntu knot
The tunty node is very reliable and durable. The peculiarity of knitting is as follows: the fishing line, passing through the eye, turns closely around Zevya and stretch the fishing line back into the ear and tighten.
Such a node is quite practical when using a synthetic nylon tape. Before tightening, you can moisten the saw blade - thus, the strength of the node will increase.
Step knot knit original hooks
A stepped knot is used to knit no bread crochets. Fashion on hooks without a ears is due to beliefs of fishermen, which forged hooks are less prone to breakage.
Also applied if the ears of the usual hook broke down. If you look closely, the node is very similar to the removal. It is noteworthy that this type of node can be applied to everyday life if you need to hang some product without a ear.
We cling the hook with glitter: gripping and double styvidory
For knitting hooks with glitter, there are two ways: gripping and double styvidory.
The principle of knitting the gripping node we have already considered, but the double stability is more reliable, compared with the capture, since reliability comes to 98%, but also to knit it a little more difficult.
The node is a bit similar to the gripping, but it is distinguished by the fact that the fishing line is passed twice through the eye, then turns on the line of the line 3-5 turns, and, as in the case of the gripping, passes through the loop near the hook's ear.
Knitting hooks without brilliance
There are several options for hook nodes without glitter. Each option is interesting.
Bayonet knot for fishermen old hardening
Bnyukov - quite popular among fishermen and is distinguished by its simplicity. This type of node is used only on the leaks of old production, because on the logs of new production the node can slide, and in the end to unleash.
With all this, such a deficiency can be excluded if you leave most of the free fishing line. In ordinary life, such a node is used when the thread in the needle is tooling, for sewing coarse cloth or shoes.
Tied the knot is very simple: you need to turn the line through the ring of the hook and make two turns around it.
Canadian eight
Canadian eight is widely used in working with synthetic wood.
This type of node is very popular in Russia, since when knitting on a synthetic thread, there is no disconnection during the tension of the fishing line.
It has widespread use in sports fishing, as with good reliability characteristics, it is enough to just untie the hook to change.
To start it, you need to turn the line through the eye and make one turn around the hook in such a way as to further turn a free end to the free space between the fishing line and the crochet.
Fisherman eight
The fishing eight already implies a classic fishing knot. At first glance, it may seem that the node is not simple, but it is justified by the high reliability of the node, for which professional fishermen fell in love with him.
Such a knitting method allows you to get rid of lump, which is noticeable for fish, when knitted by most methods. For the tying of such a node, the fishing line must be folded twice and turn into the eye in such a way that the free end remains over the crochet.
Free end must be wrapped once around the fishing line, above the eye. The next step: the free end is done through a loop, lowered in the UCHO, and is delayed.
California Knot
California Knot appeared somewhere between the 1980s and 1985, but already managed to earn a good reputation in the fishermen.
The node was invented by fishermen in the state of California when they needed to quickly and highly consolidate fishing gear on slippery nylon fishing line.
Testing a node something resembles a tie zagging. To tie such a node, the fishing line must be folded twice, to turn through the eye and wrap around the fishing line.
The strength of the fishing line is falling over time, and respectively reliability. The choice of the right node for a specific situation is very important, but small tricks will definitely make fishing more pleasant.
Consider the main of them:
- wash the line saliva. First, it will make it more slippery when tightening, and accordingly the node will delay better. Secondly, the initial quality of the thread will continue, since the scratch percentage will be almost equal to zero.
- do not be lazy to gain momentum. In very many nodes, the number of turns of the fishing line is usually from three to eight. This kind of action increases the reliability of the node, and accordingly - reduce the chances of fish to jump, along with the crochet.
- leave a little fishing line at the free end. This simple rule will allow you not to bandage the nodes after each fishing. The fishing line is inevitably tightened, and a moment can occur when the integrity of the node will be broken, due to the fact that you have not left a pair of millimeters, but cut away.
- use different nodes for different tabs. Each node has weak and strengths, so you need to learn to use it, and the hook knit with one node, and the flame is different.
The most popular ways to bind fishing hooks to the fishing line are posted in pictures and descriptions. If you do not suit the first option - go down the lower and choose anything.
My way of tied hook to the fishing line
For me, this is the easiest, comfortable and very reliable knot. I use it all the time, I have never let down, in general, I can safely advise you.
Take the line in the ear of the hook to half of its length, you can more, but then you have to cut an excess. IMPORTANT - Take a fishing line on the side of the hook. We make 5-7 revolutions around the fishing line and hook and do it now from the opposite side. Tighten, be sure - the node does not bustle. Now tie this leash with a tied crochet to.
Universal knot
This is a very good reliable knot. It can be used for hooks with an eye and for hooks without a ear. If you know how to knit this node, other ways can not be taught, it will be quite enough for successful fishing without the risk of hook unleash. This node will not let you down, be sure.
But this node is not very convenient. It's not so easy to make such a loop from the fishing line, and then get it with the end of the fishing line, so let's consider other options.
Other nodes
Of course, the fishing knots are invented so much that they probably can be devoted to a whole site, but I think that we do not need it and if you seemed to be one first way to tie the hook to the fishing line, it is not enough or it causes doubts about you, or just from the principle you Want to bind the hook with another way, I will show you several other simple and also reliable options. And also, if you want to catch at once on two hooks, you will be useful for you. Knit and catch, good luck!
Video how to tie a hook to the fishing line
How to tie a hook on the line? This usual and at the same time a difficult question worries many people. Today there are a large number of ways to help learn how to correctly bind the hooks to the fishing racks of various thicknesses.
Features and importance of the right node
When the node is knitted correctly and firmly, it can be considered reliable. Each fisherman must remember that the tied nodules will weaken the strength of the leash. This is explained by the fact that there is a fearless deformation of the cross section, which occurs during the tightening of the fishing line.
How to tie hooks on the line and correctly form a strong knot, shown in the photo. Step-by-step instruction It is a training material in which all receptions and techniques for creating a solid node are disclosed. Many novice fishermen ask professionals: "Is there any need to master all the tying methods?". Experienced fishermen Recommend not to spend time to study all kinds of ways. It is enough just to choose the most suitable and favorite knot, which will always be applied on fishing. Equally important is the acquisition of skills. In this case, the quality, reliability and strength of the node is significantly improved, and temporary costs decrease.
Light and widespread varieties of nodes
There are different knots for the fishing line, which differ in the technique and a knitting method. Below are the easiest on the technique of fastening for hooks:
- A simple eighth knot is simple enough. One end of the fishing line is taken, they are made an ordinary double knot. This is necessary so that through the inner opening it was possible to skip the other edge line again. It is worth noting that the loop should be in the deployed form for the formation of the eight. There you need to insert a comma hook. When all stages of work are made, you can pull out the ends to tighten the finished node.
- Double eight knot. It has certain differences from the simple, which are that the edge of the fishing line in the loop must be skipped exactly twice. Next, the Tsevier hook should be covered by a joint. After performing all stages of work, the end of the fishing line can be delayed. How to tie hooks on a fishing line with a double o-eight knot from the first time? Firmly and correctly do everything from the first time it turns out not at all. Only with experience comes mastery.
The presented nodes will be able to tie even novice fishermen if they carefully do it. They are easily executed, the hook is perfectly held, and also do not expose strain fishing.
Types of nodes with pass
- A node with an internal pass. Along the Tsevaya, you need to impose a long loop towards approaching. In this case, the hook head is better to hold your fingers. Next is the short end of the fishing line and the cerebral hook to perform the winding several times. The end of the fishing line is necessarily done through the loop. Tightening the node must be extremely neat, while holding both ends.
- Node with outdoor end pass. The loop is held with two fingers near the pood. Next, it is necessary to wind it together with the priest, using a short edge towards the head. The end of the fishing line is defined in the loop, which is formed near the concerned. The knot is drawn similarly to the previous way.
- A node with the internal skipping of both ends. When a large loop crossing is formed, you need to impose Tsevier hook. Near the finger, wrap the first and second side of the branch. The work is done along with Tsevy several times. All end of the fishing line must be tightened in the usual way.
Only professionals and visual manuals will help the novice fisherman answer the question: "How to tie hooks on a fishing line with a pass?". Specialists argue that the presented nodes require accuracy from a person. You need to slowly impose turns so that they do not damage the line. If they run on each other, then the node must be supplied.
The technique of performing the right node
The correct knot must be easily connected to the bait or swivel. The method described below is suitable for monofil and wicker fishing line. So, how to properly bind the hook to the fishing line:
- The fishing line must be folded twice and produce a separate loop through the ear of the swivel. It should have a single turn.
- The loop returns to its original position, where it is twice as high as the main fishing line. It is necessary to hold one end of the loop and folded the main fishing line as hard as possible. Ultimately the result should be double loop.
- A free hand should skip the swivel through a double loop.
- To tighten the node as hard as possible, you will need to capture the swivel with the help of pliers. The fishing line should be moistened. Both ends of the fishing line need to be held and slowly, but firmly tighten the knot.
- The formed turns must be shifted toward the ear of the swivel.
All the above steps instructions need to be repeated at least six times.
Performing all actions slowly, a novice fisherman will understand how to tie hooks on the fishing line correctly and reliably.
During knitting node, you need to adhere to the main rule that concerns tightening. Before starting work, the nodules are better to moisten. Only in this case it will achieve maximum strength.
Experts recommend tightening as slowly as possible, and it is not necessary to hurry in order not to heat the line once again. It is worth noting that at the bottom or in the middle, the nodes will differ. This is considered the norm. There is no need to perform additional sizing on the monolesque. Thus, it is possible to increase its fragility several times.
Finished work should have such a sequence - a knot, hook, fishing line.
Although there are many options for fastening the hook to the fishing line, you need to own one or other ways well, which is quite enough.
You can familiarize yourself with such options for fastening hooks to the fishing line, you can on the presented photos. You can choose any, the most interesting and try to master it.
The first option to tie the hook to the fishing line
For each fisherman, there is its own, the most reliable way that has never let down. This is a variant that you can safely advise novice fishermen.
To do this, you need to take the required segment of the fishing line and go to the eye from the side of the sting. After that, 5-7 revolutions around the zevé hook and fishing rods are made by the long end of the cutting line. After that, the same end is done in the Hook UCHO, but on the other hand. Finally, the node must be tightened. It turns out a strong and reliable knot that will not be able to unleached.
Universal knot
This is a fairly reliable knot that can be used to fix crochets with an eye without it. If you master this node, then it is one enough to fix any elements of tackle. He will never let down. Unfortunately, this node is not so easy to master and it will be difficult to apply in fishing conditions when every minute is the road. Therefore, it makes sense to familiarize yourself with other ways to fasten the hook.
Other nodes
There is a sufficient number of fishing units in order to choose from them one, the most suitable. It is very important that the fastening is not only reliable, but it could be easily repeated. This is especially important when fishing in the process of the right and you need to replace the lost leash with a crochet right there, and home billets are not suitable. Knitting technique should be such that the node can be connected with closed eyes. This is relevant when fishing is carried out in the dark.
Naturally, in one article, it is simply impossible to tell about all the mounting options, therefore a video is proposed that helps to decide on the appropriate option. If someone catches two hooks, here you can find such a method of fastening that provides for the presence of two hooks.
Video example how to bind the hook to the fishing line
You should not ignore such proposals, as they are quite useful. The recommended video is very clearly shown and describes how quickly and securely secure the hook on the fishing line.
From such azov, like bringing the hook, learning all fishing arts begins. Perhaps this is one of the most necessary skills for both a beginner and for the pros. Even if the fisherman is confident that he binds the equipment correctly, read this article, it will not be superfluous for him. Perhaps the new methods described below will become a discovery for experienced fishermen, and their lives will make much easier.
So, is there a single way to correctly tie a hook to the fishing line? Of course not! Fastening methods can be counted at least a dozen. Each of them is relevant in its own way and good. Selecting the method of tying should be based on the method of fishing, size and shape of the hook, fishing fishing line. Let us consider in more detail some ways of binding a hook to the fishing line, and find out for what cases one or another option is suitable for fixing this fishing snap. Some node names are the translation of their names from English. Right will call fishing units in this way.
Bloody Knot, or Blood Knot
Behind the sinister name hides a mating method, which is most often used in fishing practice. The history of the name leaves the roots in the Middle Ages: the lamb with such nodes on the ropes was punished by the sheltered sailors. Over time, myths associated with this node were forgotten, and in modern times it is used as an ordinary node, which, besides other applications, is practiced to bring the hook to the fishing line.
Scheme of tying such:
- In the ring of the equipment, we produce the end of the forest.
- Free end withdraw to the main thread and make it about 6-7 revolutions around it.
- We return the tip in the loop that was formed by the Ear.
- Tighten the tension of the short tip, then shorten it or burn it.
The fishing hook to the fishing line is firmly tied, to unleash such a node is practically impossible.
This fastening method is suitable not only for hooking. They can be used to record winter and summer flashes, subject to catching without a special leash.
The second variety of bloody node is a closed bloody node. The principle of use is the same: you need to skip the thread through the eye, it is necessary to wind up several times the main thread of the working thing, while the turns need to be laid so that they are free. The next step is the return of the thread in the loop at the base of the hook, and then the sale through one of the turns.
It is believed that the equipment element tied in this way will sit even stronger.
Both the above methods are recommended for freecarbon base or for free fishing. Before tieting an element to snap to the fishing line, you need to moisten it with water. So she is easier and tightened.
Easy way
Many fishermen for fixing the hook on the fishing line use such a mounting method like "Palomar". This is a node for nylon loades with a diameter of 0.08 to 0.18. Takes like this:
- Double core starts in a hook ear.
- Bashed the equipment element is best, a boating thread from the side of the sting.
- We make a dual end, and throw the end through the snap. It remains only to tighten.
More detailed instructions Depicted in the photo. This method should be in a piggy bank from any angler, because you can bind you not only the hook, but also other elements of the snap.
In the fishing circles, this node is also called the "stupid leash". Where does such a name come from, the history is not known, it may be originated from the saying "Any fool will do." Indeed, tie the line in this way - simpler.
- From the side of the Hook Island, enter the fishing line in his ear.
- Out up so many veins so that the loop is formed near the comma.
- Press it with smooth turns of the fishing line, ranging from the ear.
- Grind the tip back into the loop.
This method allows you to fix the hook on the fishing line very clearly, because the fishing line holds it not just for the eye, but for the Tsevier. The use of this method is suitable not only to attach the hook on the line, but also in order to tie a hook without a ear. In this case, the node must be delayed even more carefully. Do not forget every time you tighten the forests to water it with water, it will avoid small cracks in the structure of the snap.
It is useful for the way and winter fisherman: the versicle, fixed with such a node, hangs on the fishing line under the perfect degree - 90 in relation to the main fishing line.
Another type of installation that allows you to mount the hook to the main fishing line. It is well holding such a node on a wicker fishing line, but it is suitable only to buy out small fish. Large load to this method is contraindicated. You can tie a hook according to such a scheme:
- Pull the braid into the hook ring.
- Make two loops on the Tsevier and tighten well. What kind of knot should be - it is better visible in the photo.
"Eight"
A knot, the installation of which is similar to the figure eight, is needed in order to fix the hook on a flider chamber or any other synthetic thread. In order to fix the snap-in with a simple "eight", you need to fold the forest twice and push into the eyelet of the loop. A free end needs to wrap the main fishing line so that the second link is the second link. It remains only to stretch the end through the bottom loop and tie. Equipment will sit still.
Fishing eight - a node that can only be used on a strong fishing line. For thin threads, he will not suit.
Specuses
If the hook is not equipped with a ring, then bind it to the fishing line is much more complicated. It must be a special installation that can guarantee the reliability of the snap. How to tie a hook with a spatula so that in the most responsible moment he does not jump from the fishing line together with trophy?
There is nothing more reliable than a hook tied with a looped knot. See and read how it is done!
It is necessary to fold the fishing line in half and place it along the Tsevaya looping to the edge. The hook on the fishing line is simply superimposed, but for snaps with an eye, the sequence begins with the product through the eye. We take a short tip, make 4-5 revolutions. We return to the loop and tighten.
Wetting before tightening necessarily for this installation
If at the end of the fishing line already has a loop (when using leashes), then use the Council how to tie a hook to the loop of the loop.
- Fold the loop and stretch it through the hook ring.
- Pour it up and in the opposite direction to skip the hook through the loop.
The node will delay himself in the process of catching. The reliability of this method depends on the correctness of the hinge made on the leash.
Nodes for fastening in fishing science - there is any case. However, many modern fishermen do not discern and automating this process. To do this, they use Cooked.
You can prepare leashes with hooks, you can also lead to this lesson one evening, you can free yourself from this mandatory procedure for several upcoming fishing. Impose leash different lengths, with different hooks and carefully pack them in a leash.
Coochukyyyaze and in summer, and for winter fishing. They can be born any hooks and verses.