the main  /  Podgamma  /  Deciphering Fischer Ski Number. Ski Fischer: models, reviews

Deciphering Fischer Ski Number. Ski Fischer: models, reviews

Podgamma
25.03.2020

Fischer Serial Ski Number: Decryption

Example: 187/1450688580 031

187 - Ski length in cm

14 - year of release (2013)

5 - Stiffness (4 - Soft, 5 - MEDIUM, 6 - STIFF)

06 - The sequence number of the week of release from the beginning of the calendar year

88580 - Serial Ski Room

From 2016, the Ski number goes to this type 191/1653513931 without stiffness index. The growth of top skate models decreased by 1 cm, and the FA index is written on a sticker with a barcode.

Information about the structure and sizes of the Fischer ski on the skis on the side of the sliding surface can be found two notation, for example: 28 / 1q or 28/902 or A5 / 610. In these notation, information about the base of the sliding and ski design is laid.

Sliding surfaces Fischer.

Marking of the sliding surface can be found on a ski sliding on a ski. The design is labeled there.

A5. - Universal base on the cold from T -5c and below. It is worth skiing with COLD marking, the code of the factory structure C1-1.

28 - Universal warm base on T -10C and higher. Suitable for all types of snow, stands on skiing with Plus marking. From the 17/18 season, it became more versatile: -10 and warmer, against old from -2 and warmer. The code of the factory structure remained the same - P5-1.

Fischer ski pliers

Designs of skate skis

115 (15/11) - Design for well-prepared and leather track. Points of support are closer to the masculine and the ski heel. Such a location increases the stability of the ski. Especially relevant on an unprepared Ice highway and in case of lack of equipment. The main cons: "sticking" skis and "breaking" into loose snow.

610 (61Q, 1Q) - Design for well-prepared and soft route. Points of support are reduced closer to the block, which makes softer thoughts and the heel of the skis. This design allows the ski not to "stick up" and not to break into the loose snow. The main minutes: "grow out" on the ice track with disadvantages of technology.

Classic ski designs

902 (90/9q2) - Design for the soft and loose track. Similar to skate 610 / 1q, i.e. It has soft mysteries and heels. The shoe is located below than 812 and facilitates the holding in difficult weather conditions. The main minus: due to the low location of the Holding Zone, the ointment will go faster.

812 (81 / 8q2) - Universal classic design. The standard location of the pad retains the holding ointment longer, but requires a greater impulse to join.

Fisher Ski Structures

The most common structures of P5-1 and C1-1. They, according to manufacturers, are most popular at the World Cup.

Fischer Structures

P10-1 for dry snow at temperatures below 0

C1-1 All types of snow, including fresh, temperature below -5

C3-1 for artificial snow, temperature below -5

C8-1 narrower structure for artificial snow from 0 to -10

C12-1 Any type of snow, -5-15

C12-7 fine-grained snow on T from 0 to -10

P1-1 Temperature +3 to -5, Fresh Snow

P3-1 Structure on fresh wet snow, 0 degrees with a transition to a plus

P3-2 on old sleet at t 0 with transition to plus

P3-3 watery snow, from +5 and above

P5-0 Dry small snow from 0 to -5

P5-9 Structure for classic skis on old wet snow, Temperature from 0 and above TZ1-1 Structure on fresh snow at temperatures below 0

P5-1 Universal temperature structure from +5 to -10. Any type of snow

P22-6 Transitional structure for any type of snow, temperature from +5 to -5

P11-2 All Snow Types from +2 to -8

P10-1 on the old snow at 0 degrees with the transition to the minus temperature

Ramsaw's structures

S13-6 Structure on rainy weather

S13-5-08 Option on Very Wet Fresh Snow

S11-1 Dry Snow on T -10 -20

S12-1 Fresh Natural and Artificial Snow T 0 -15

S12-4 Fresh Dry Snow T -5 -10

S12-2 Fresh Wet Snow T 0 -5

S12-6 Fresh Falling Wet Snow T 0 -10

S12-12 Old Snow T 0 -5

S12-14 on frozen snow during warming, fresh snow, T -2 -10

S13-4 Wet snow, under natural and artificial, T 0 -2

S13-5 Fresh Falling Wet Snow, T 0 With Transition to Plus

TZ1-1 All snow types on T 0 with transition to minus

S11-3 Structure under artificial snow, T -10 -20

S12-7 Artificial Snow, T -2 -12

S11-2 Cold Dry Natural Snow, T -10 -20

S12-16 Structure for high humidity and fresh snow, suitable for gloss, T 0 -10

S12-2-07 for fresh snow and soft skiing 0 -10

S12-3 Fresh snow under T -2 -6

S13-6 Wet snow with rain, rain

FA, HR, SVZ Indicators

This marking is not on all skiing, but only on specially selected skiing for a professional or pre-ordered.

Hr. - Clearance in millimeters, which remains after pressing on a ski of half the weight of the average skier. The load is attached to a ski of 7 cm below the balance point. The remaining gap is HR. Simply put, it is the rigidity of the Maskov and the heels of skis. For example, if you take skis with the same FA, but different HRs, skiing with a large HR will be pushed more evenly, and with a smaller one - first easy, but it will be more difficult to choose. With a large HR - a big arc, more curved ski, with a smaller HR - a smaller arc, a block closer to the ski in the rental phase. Low block is especially important in inexperienced skiers. The classic will make it easier for the holding, and in the skate will improve stability in the box office.

Svz. - Characteristic, showing how much ski is different from the perfect ratio of HR and FA. The value is applied in the production to test the quality and selection of the skis into the pair. When choosing a pair of skis for yourself, the indicator does not matter. Fa (stiffness index) is the number of kilograms to be attached to 7 cm below the balance point, to compress the ski to the gap of 0.2 millimeters. Why fa and not a specific weight?

Index FA. - Characteristic ski, not an athlete. Using this parameter, a competent specialist may choose skis under a specific athlete. One and the same skiing can come up with 70kg to a professional skier and 90kg to an amateur. At the same time, both will be comfortable and skiing will work as it should. With FA pick up more difficult, but if you figure it out, the selection of ski will be better.

For beginners the best option Pleasure models are considered that do not have a certain ski style.

In terms of its capabilities and characteristics, they are much inferior to professional, but a small cost makes them attractive for beginners.

A distinctive feature is the presence of notches on the sliding surface, replacing the preliminary ski preparation. Do not require preparation (lubrication) before skiing.

The most sold pleasure model for novice adult skiers. It is characterized by ease of control and high resistance.

Does not require lubrication due to the presence of notes. Basic colors - red, black. Austrian ATOMIC technologies are manufactured in Bulgaria.

  • stable sliding characteristics;
  • do not require lubricants due to the presence of "scheat" (notes);
  • high quality deflection;
  • accuracy in management;
  • a light weight;
  • safe mounts;
  • unlimited range of use temperature;
  • universal - work in any snow conditions, including weakly trained tracks;
  • unisex are suitable for men and women.

  • higher price in comparison with similar models of other brands;
  • designed mainly for walking through the forest;
  • are not suitable for obtaining professional results;
  • require drying and storage in a dry ventilated room;
  • they are afraid of ultraviolet and heating to a temperature above 60 ° C.

Functions atomic Motion 46 Grip

  • pleasure riding with a classic move;
  • fitness outdoors;
  • possess direct geometry that allows a newcomer to quickly master the technical skills of skiing.

  • geometry (sock-waist-heel, mm) - traditional narrow skis (46-46-46);
  • rostovka (length) - 179-207 cm;
  • pair weight - 1400 g (186 cm);
  • composition - synthetic materials (core Densolit, facilitating weight skiing) + plastic;
  • the system of notches - in the zone of the G2 SINCRO pad on the sliding surface, neutralizing the return and allowing you to move on skiing without ointment;
  • sliding surface - 1500;
  • rigidity - low;
  • color - black-red-white or black blue-white.

Complete set Atomic Motion 46 Grip

  • installed in the optimal position on ski automatic mounting Auto Universal (SNS);
  • laser marking for each pair with information about the allowable weight skier.

  • ski bag;
  • ski sticks Lite (combination of carbon and fiberglass), Nordic Motion COMP;
  • Motion 25 (compatible with sNS fasteners, water-repellent front cuff, keeping her legs dry in any weather);
  • nordic bag with adjustable belt and thermoflag.

Designed for squeezed movements of the stroke of the Christmas tree, which are the basis skate style Skania. Have greater strength than classic models, due to a significant load per capita during riding.

This type of movement is used mainly for lifts to the mountain and passing turns on wide, well-prepared and tampering tracks.

Overview of the Fischer RCS SK Plus Stiff Nis model

The best models for skate strokedesigned for adult athletes and progressive lovers. He entered the collection of season 2015/2016. In the 2016/2017 season, Fischer RCS SK Plus Stiff Nis Hole 2017 with a hole in the Misk was published in the updated version.

Manufactured by the Austrian company Fischer in Austria. Basic colors - black, yellow, white. Different with a blunt toe require careful preparation.

  • a fake profile that improves ski operation;
  • reinforced Kant, extending the service life;
  • high strength on the break;
  • the sliding surface perfectly operates under wet snow at -5 ° C and higher;
  • high accuracy of the selection of ski pairs for similar parameters;
  • reduced by 5 g of the weaplation of the ISA;
  • minimum vibrations.

  • high price;
  • require professional technical skills;
  • choice ski boots limited to NNN mounting system.

FISCHER RCS SK PLUS STIFF NIS functions

  • sock - 41 mm, waist - 44 mm, heel - 44 mm;
  • length - 172-192 cm;
  • weight - 1090 g (187 cm);
  • core - Carbon Cellular Air Core Carbon, containing 80% air;
  • thoughts and heel - ultra-lights from special laminates that reduce weight and vibration;
  • molding method - NIS;
  • stiffness - STIFF - configured under the rigidity of the skiing (for soft - sock and heel are made soft, hard - rigid);
  • slip surface treatment - FINISH FERST, including grinding, application of the PLUS structure using a natural diamond, filling with basic paraffin;
  • computer control of stiffness;
  • kanta - Power EDGE reinforced, guaranteeing ski durability;
  • color - black yellow-white.

  • mounts are missing;
  • the NIS NNN fastening platform allowing you to quickly install and remove the fasteners from the ski.

Accessories from Fischer.

  • speedmax ski sticks;
  • xcelerator SKATE 2.0 NIS mounting;
  • case for a pair of skis;
  • velcro for ease of carrier skis;
  • ski skiing boots for the RCS Carbon Lite Skating RCS;
  • bag for shoes.

Designed for athletes and lovers with weight of more than 100 kg.

A distinctive feature is an enlarged ski rigidity, which is selected according to the weight of the skier using a special flex tester device, which is available in all serious specialized stores.

SALOMON CARBON SKATE LAB CARBON BLUE model review

The newest development of the French manufacturer Salomon for professionals and skate style experts. Have an extra rigid block with a special tuning for skiers with high weight with ultra-low weight ski, as well as hardware control in dynamics.

Got the name "The Future of Ski Racing", opened a new level in the world ski races. Produced in Austria.

  • ultra-easy weight;
  • extraptus block for heavy skiers;
  • digital hardness control;
  • fully carbon construction;
  • increased sliding phase;
  • more powerful push and reinforced energy transmission due to a long-range shoded forward pads from carbon;
  • soft sock and heel with hard twisting;
  • selecting the version of the ski structure - universal (fresh snow) and for any snow conditions.
  • universality - designed to slip on any tracks, regardless of their condition and air temperature.

  • only for advanced lovers and professionals;
  • high price.

Functions Salomon Carbon Skate Lab Carbon Blue

  • ski racing by the ski running of the world championships;
  • slide without additional effort in any weather.

  • weight - 980 g (187 cm);
  • length - 182-192 cm;
  • paul - Unisex;
  • core - lightweight cellular Stiff Nomex;
  • transparent sliding surface G5;
  • protection of the surface of the slip film;
  • stiffness control - D2FC digital functionality;
  • sock and heel - low profile, minimal thickness;
  • structure - universal WCU or under the order AM7 (universal) or AC5 (coolest).

  • without fasteners.

Accessories from Salomon

  • fastening for skating ski SNS Pilot Sport Combi;
  • ski bag;
  • bag for boot;
  • s-LAB OverBoot ski boots;
  • ski sticks Equip 100 Carbon.

For active rest Children from 4 years and older. Different resistance, enlarged width and bright design. For the smallests from 4 to 7 years old, skis comes complete with fasteners, shoes and sticks.

The main purpose of children's models is to teach a child to stand confidently and move on skis.

Overview of the Fischer Snowstar NIS KIDS model

Pleasure skis for the smallest lovers. Different with a bright beautiful design. A few color versions are offered: blue, green, pink (for girls and boys).

Have installed fasteners NNN and a system of notches for better clutch. Designed for riding with a classic course. The development of the Austrian company Fischer is manufactured in Ukraine. Entered the 2015/2016 collection.

  • wide steady profile;
  • special crown notches, improving the grip and facilitating lifting uphill;
  • processing the surface of the sliding for any weather conditions;
  • core with a selected system of aircraft, increasing strength and evenly distributing weight;
  • easy sliding over rough tracks.

  • require storage in a dry room away from heat sources;
  • manual fixation of fasteners.

FISCHER SNOWSTAR NIS KIDS FUNCTIONS

  • to get riding skills by classic style and outdoor activities.

  • sock - 54 mm, waist - 48 mm, heel - 52 mm;
  • rostovka - 90-140 cm;
  • weight - 0.69 kg (110 cm);
  • materials - wood and multicomponent plastic composites;
  • core - Air Channel;
  • special notches "Scales" - Crown on a sliding surface that do not give a ski slip back;
  • base - sintec;
  • paul - for girls and boys;
  • color - black pink-white, black-green and white and black blue-white.
  • molding method - NIS.

  • installed mounts NNN (XC Snowstar NIS).

Accessories Fischer Snowstar Nis Kids

  • ski bag;
  • case for shoes;
  • children's running boots;
  • sprint ski sticks;
  • rCS Junior ski sticks;
  • cuffs for skis Racecode.

Produced as private view "BACK COUNTRY". When choosing, not only the weight of the skier in suit and equipment is taken into account, but the weight of the backpack, which he carries on his shoulders.

For the price of a model for tourism, stand in one price niche with pleasure. Designed for short and long walks in crugged tracks.

The product of the Austrian company Atomic is one of the leaders in the ski equipment market. For the first time appeared in the 2011/2012 collection, as a universal version for men and women (unisex).

Every year ski design is updated, in the 2015/2016 season, separate female models appeared, distinguished by a stylish design. In the women's models in the marking added the letter "W".

Light, easy to control the ski, allow you to conduct in the campaign for several hours without fatigue. Tangible comfort when riding in any conditions.

  • reliable and easy to use;
  • wide ski geometry, ensuring equilibrium and stability;
  • the possibility of riding in all means due to innovative clutch technology;
  • light weight due to the core densolite;
  • easy control and maneuverability even in the most difficult conditions;
  • stability on the descent;
  • do not require lubrication of the sliding surface;
  • a special zone that allows you to move in a classic course without using ointments;
  • ski's nose is broken, as in wooden models;
  • suitable for beginners.

  • there is no always available in the trading network due to increased demand for the model;
  • low rigidity.

Atomic Motion 52 Grip functions

  • short-term and long-term walks in nature in different conditions.

Characteristics of Atomic Motion 52 Grip

  • sock - 52 mm, waist - 47 mm, heel - 49 mm;
  • rostovka - 177-205 cm;
  • weight - 1.14 kg (177 cm);
  • material - plastic, composite materials, wood;
  • grip and NoWaxGlide G2 Syncro clutch technology;
  • slip surface - BI 1500 + Universal Grinding;
  • lubricant - NOWAX SYSTEM;
  • mounting mechanism - NIS;
  • profile 3D Touring with lightweight sock and heel.

  • without fasteners;
  • without platform under fastening.
  • ski mounts Auto Universal;
  • case for ski nordic 3;
  • velcro for transportation;
  • bag for boot;
  • boots for fastening NNN;
  • motion Lite Gray ski sticks.

Rossignol X-Ium Skating WCS Model Overview

The model of the skate style for professional skiers from the French company Rossignol.

It is produced in the factory of the same name in France (pre-binding model X-IUM) or in Spain (top X-IUM WCS) with three embodiments of profiles (S1 - frost, S2 - universal, S3 - sleet).

Pre-binding professional model and tops are characterized by weight (the first for 186 cm per 20 g is easier). On the models produced in Spain, a pre-binding brand structure can be applied under the order.

  • increased rigidity;
  • suitable for skiers with a lot of weight (up to 110 kg in Rostovka 192);
  • the possibility of selecting individual stiffness with the labeling of the customer's name;
  • light weight, thanks to the core with the Nomex cellular structure;
  • universal profile S2 for any temperature and snow state;
  • low block and the average length of the contact area with snow;
  • resistance to twisting;
  • excellent stability;
  • longitudinal fastening adjustment relative to the center;
  • activecap stability technologies, Supraedge, making skis predictable;
  • nIS mounting mechanism - Easy installation and adjustment.

  • limited edition, buy a pre-office model only under the order;
  • high price.

ROSSIGNOL X-IUM SKATING WCS functions

  • professional race skate running for any weather.
  • geometry - 40-44-43-43 mm;
  • rostovka - 173-192 cm;
  • weight - 1100g (186 cm);
  • sliding surface - K7000, universal with a double groove for a more stable coursework stability;
  • the core is a cellular facilitated Nomex with a fiberglass shell and thin walls of the tree;
  • paul - Unisex;
  • skating type - skate;
  • material - composite, high molecular weight polyethylene with low friction coefficient, 3D Carbon Profile;
  • colors - red-black.

  • without fasteners.

Accessories from Rossignol

  • fastening - X-Celerator SSR NIS, X-Celerator Skate Nis;
  • hT 700 ski sticks;
  • ski ski boots Rossignol X-IUM CARBON PREMIUM;
  • ski bag;
  • bag for boot;
  • velcro for transportation.

Intended for professional athletes. All innovative developments appear in this group. They are also called the top or top model. Professional skiing There are strictest phased manufacturing control.

Models for professional skiers are made under the order with the marking of the surname and the name of the athlete. The cost is in the highest price category. Their task is to help achieve maximum results and victories at the competition of different levels.

Professional model from the Norwegian manufacturer Madshus for the skate stroke. Appeared in the 2014-2015 collections, in 2015-2016 came out with an updated design.

It differs from the models of other well-known brands in the absence of a core with a cellular structure. Instead, a foam polyurethane PR 100X ACRYL CORE is used, thanks to which the ski is done a little easier and strong models With a cell core.

  • high strength of the model (it is a carbon fiber stocking impregnated with resin and foam filled);
  • additional torsion rigidity obtained by applying two additional layers of carbon fiber;
  • suitable for skiing with dense and freshly fallen snow;
  • a unique 3D design that provides an excellent slip at the expense of the side cut;
  • high rigidity for twisting;
  • ideally selected hardness and geometry, ensuring effective effort;
  • the ability to apply the structure for special weather conditions (D5 - for warm universal from +1 to -10 ° C and D4 - cold universal);
  • the NIS platform is a fast installation that does not require drilling, and a simple move on ski forward-back when changing weather conditions.

  • high price;
  • skis with definitely structure are made under the order in Norway;
  • require the correct installation of fasteners.

Functions Madshus Race Champion Nanosonic Carbon Skate

  • world Level Competitions by skate running.

  • sock - 44 mm, waist - 43 mm, heel - 44 mm;
  • rostovka - 175-195 cm (with a pitch of 5 cm);
  • weight - 1000 g (190 cm);
  • paul - Unisex;
  • the level of preparation is a professional;
  • deflection under the weight of the skier - medium;
  • fastenings - Nis7;
  • core - PR 100X (multi-layer carbon construction);
  • slip surface - P190 Nano Cold without notches.

  • without fasteners.

Accessories from Madshus.

  • mounting X-Celerator Skate Nis;
  • cuffs for ligament RED ski;
  • ski shoes Nano SKC, Champion Nano Carbon Classic;
  • ski sticks Nano Carbon;
  • bag for boot;
  • ski bag;
  • hat Race Hat Red.

We are produced for lovers of ski rods on crossed tracks. This species is also called a massive cross-country ski option for people who prefer an active lifestyle.

For the manufacture of professional models, more expensive innovative materials are used than for ski universal, so they are easier by weight. Properly selected for the use of the user universal skis can serve for many years.

Universal skis for lovers and athletes, allowing you to ride with any weather with a skate and classic style. They have a special geometry of the side cut, which helps to receive skills to ski by any move.

Products of the Austrian Brand Fischer produced in Ukraine.

  • sliding surface of professional racing;
  • lightweight core, reduced ski weight and allowing riding in any weather;
  • universality - skating and classic stroke;
  • special side cutting geometry, facilitating the development of skating techniques;
  • nIS fastening system - fast installation without drilling and adjustment;
  • affordable price.

  • more heavy weight (on average 1.5 kg) than professional models (on average 1 kg);
  • it is necessary to store in a dry room at room temperature outside the heat source zone.

Functions Racing Fischer SC Combi Nis 2017

  • ski ridges on rough tracks for any weather;
  • skating and classic style.

  • sock - 41, waist - 44 mm, heel - 44 mm;
  • rostovka - 182-202 cm;
  • weight - 1380 g (182 cm);
  • fastening type - NIS;
  • rigidity - high;
  • paul - Unisex;
  • material - wood, composite materials;
  • kanta - Power Layer with a thickness of 0.2 mm along the entire length of the ultralight laminate, reinforcing the design and guaranteeing the necessary torsion rigidity;
  • the core is lightweight with basalt AIR CHANNEL BASALIGHT fibers, preserving the same rigidity at different temperatures;

In the global ski market, Fischer occupy a leading position. They are popular in Russia and other CIS countries. Fixtures are distinguished by high quality, using newest Materials, as well as a considerable price. They are exploited by leading athletes and lovers, actively engaged in skiing.

About manufacturer

Fisher was founded back in 1924 little-known at that time with Jolair Joseph Fisher. The first production workshop was erected in the city of Rida (Austria). At first, the company produced various carpentry products. Running I. skiing Fischer began to release only in 1934. Now the corporation occupies the leading places for the manufacture of relevant products in the world.

In the domestic market, professional samples of this brand also in priority. In addition, the company produces ski sticks Boots, special clothing and sports accessories. The main production line consists of training, amateur, racing and ski skiing.

Marking

The designations are put on the mystery of the ski and on their side surface. In the first case, these are two digits. One of them refers to the type of sliding surface. The cold type is marked with an A5 symbol, and warm - 28. The second marker indicates the features of the design. Ski Fischer. 610 (610Q) Focused on soft trained track type. An embodiment with an index 115 (1Q) is designed for rigid and leather sections. A number of digits are also applied on the side surface. The first of them indicates a growth group in centimeters, the second is the year of production. The following number indicates rigidity (may be 6, 5 or 4 - Steff / Medium / Hard). The next five digits correspond to the party number, and the last index is the stringency indicator.

Features

The range of thermal loads that Fischer's skis are divided into two categories, namely:

  • Cold Type (Cold) is designed for use at temperatures below -5 degrees Celsius.
  • The warm class (PLUS) is designed to operate at a higher temperature.

In fact, the second type is considered more versatile. The devices have a soft basis that makes it possible to achieve optimal slip on the soft highway with a high humidity indicator. In severe weather, they can be configured by rubbing with paraffin or special kumps. Cold analogues on the soft snow will slide worse, and when frost is below five degrees, this figure is almost the same.

Mountain Ski Fischer.

The Speedmax model is a professional high-level pattern. On such a modification, the most famous skiers. In this series there are skate and classic variations. In the first case, the devices are equipped with a characteristic cut in a ski cape, which reduces the weight of the model.

They are equipped with a special carbon core and processed using the technology of cold stickers of the sliding part. To do this, first produces the base in the molding furnace at a temperature of more than 100 degrees, and then a working surface is attached at room temperature. This improves gliding, regardless of weather conditions. The mass of such a pair is 1.02 kilograms with a length of 1.86 meters.

  • Mountain skiing Fischer Carbonlite. From the previous series, they are distinguished by the lightweight core of the Air Core Carbonlite system and production technology. The product is fully manufactured in the furnace. With a pair length in 186 centimeters, its weight is 0.97 kg.
  • The modification of the RCS is the previous version without a hole in Misk. The use in the design of laminated elements and fiberglass contributes to the fact that the products weighs 1.08 kg with a standard length (186 cm).

Copies for training

This category is classified as a series for training races by professional skiers and lovers with extensive experience. Options for skate type and skis Fischer Classic are available. Production uses simpler and cheap materials. Production scheme identical to elite variations. Such a combination allows you to guarantee high running parameters at a lesser price.

For example, the Fisher Modification (SCS) has a universal structure designed for different climatic conditions. Hardened Kants provide high coursework stability, and the addition inserts on heels and socks increase the service life and stiffness of the product. Additionally, a core consists of material with the inclusion of volcanic basalt elements is used. The mass of the pair with a length of 1.87 meters is 1.27 kilograms.

Another modification for Fisher training (CRS) is equipped with a universal construct of the sliding part, differs from the previous version by the presence of other materials, as well as dimensions. The weight is 1.35 kilograms, length - 187 centimeters.

Amateur and tourist options

In this class, Fisher's skis are divided into skate, classic, children's and combined options. They are designed for the operation of novice athletes, young skiers and other people who like ordinary skating on such a device. The manufacture uses high-quality, but simple components and materials. With this approach, the preservation of the desired high-speed qualities is ensured in combination with an acceptable price. Among tourist options The following modifications are allocated:

  • SC - Course has a mass of 1.38 kilograms and a length of 1.87 meters.
  • Skis Fischer Sprint Ls have a weight of 1.45 kg and a length of 187 centimeters.

Consumer responses

Owners are noted in the versions under consideration of the mass of advantages and minor cons. Pluses, users include reliability, strength, excellent maneuverability and slip. In addition, owners arrange external design, the possibility of acquiring similar additional accessories and a wide selection, depending on the purpose.

Among the minuses, lovers and professionals celebrate a high price, especially for professional models. However, they agree that quality remains at a high level, thanks to the use of productive technologies and high-quality components in the manufacture. Cross-country skiing Fischer, the reviews of which are predominantly positive, rightfully are the leader in their class, and both amateur and professional levels.

Conclusion

Fisher's skis company acquired high popularity in many respects due to top copies. They are designed for athletes of various levels and just connoisseurs of this sport. It is worth noting that Fischer's children's skis are identified by Junior name.

They differ in size, but perfectly suitable for training and moving on different snowy tracks of young skiers. Despite the decent cost, the products under consideration are in demand worldwide. In addition, the Skis "Fisher" is beneficially allocated by a combination of price and quality among the nearest competitors.

Overview of Fischer 2015 Beach Ski Collection

Series Race. (racing / athlete) is represented by the following models: new Fischer season Speedmax Skate Cold, Fisher Speedmax Skate Plus., Fischer. CarbonLite Plus., Fischer. CarbonLite Cold. These are professional skate models created for the World Cup Level Competitions and designed for world-class athletes. Ultra-old, ultrafine ski skiing with WORLD CUP profile for successful participation and victories in any races. Speedmax skiing applied the latest technology for connecting the sliding surface with the base of the ski. The Speedmax core is baked separately, and the sliding surface passes later in cold conditions. Thereby, the crystalline lattice of plastic molecules is not disturbed and this leads to an increase in skiing high-speed indicators and an unprecedented dynamics. In the CARBONLITE models, HM-carbon is used to reduce the weight of the Misk. It reduces the weight and vibration of skis when repulsion, and this reduces energy loss and provides more uniform steps when driving a skate move. Dipzone Prices of the racing series 22 000 - 25 000 rub. Series Sport (experts / lovers / fitness) are represented by RCS SKATE ( Plus. and Cold), RCR Skate., SCS Skate., CRS Skate., SC SKATE NIS.. This is a line of excellent ski ski for professionals and amateur athletes conducting a lot of time skiing. Skis are manufactured by the latest technology and are intended for advanced athletes. These models have a high molecular weight of the sliding surface that got from the older models, but with a universal structure that allows the ski to go well under different weather conditions. The exception is the RCS SKATE model, which has division on Plus and Cold. The main difference of the ski data is the various use of materials in the structure of their cores, which affects the nature of the pads and weight indicators of the pair itself. The series binds the geometry and the design of racing models, which makes skis managed and very fast. It is worth recalling that Fischer is a world leader in the production of racing skiing. It is on the skiing of this manufacturer that the largest number of prizes on the most titular starts in the world are conquered. Range of price of the expert series Ski 7 600 - 14,300 rubles.

Overview of cross-country skiing collections Fischer 2014

Speedmax and Carbonlite. - The cross-country skis of these series are the most high-tech and perfect in the Fischer line. Skiing are the strongest athletes at the World Cup Level Competitions. Skis these series are made using carbon fibers to facilitate weight and increase the strength of the ski. Carbonlite is the most light skiing in the Fischer line - just 980gr. The main difference between the Fischer Speedmax from CarbonLite is the "cold" glue surface glue to ski. CARBONLITE skis glued entirely in the oven at a temperature of 100-120 degrees Celsius. Speedmax glued in the furnace in the same way, but without a sliding surface. Sliste is glued to skis lastly at room temperature. Thus, plastic pores are not damaged at high temperatures, and it allows paraffins to hold longer than on ordinary skiing. CarbonLite available for skate stroke and classics. Plus models - for temperature -5 and higher. Models COLD for temperature -5 and below. Speedmax In stock Only for the skate stroke and for temperature -5 and higher. Speedmax weight - 1030 gr. Carbonlite weight - 980 gr.

RCS. - Professional skiing for skate stroke. Socks and heel skis are made of ultra-easy laminates to reduce weight and reduce vibration. The core is made of cellular materials, in which 80% of the internal volume takes air. Optimal torsion rigidity and strength on the break. In stock Models for classic and skate stroke. For warm and cold temperatures. RCS weight - 1080 gr.

RCR Skate. - Skating model for competitions and training. Professional sliding surface and universal processing DTG WORLD CUP Universal provide excellent slip in all weather conditions. The new generation of cores is made with the addition of volcanic basalt fibers, which reduces the weight of the ski and provides excellent elasticity in all weather conditions. Weight RCR SKATE - 1190 gr.

SCS Skate. - Ski skiing for athletes - lovers. The core with fibers of the volcanic basalt facilitates ski and makes it elastic in all weather conditions. Special inserts on the heel skis enhance the design and increase the service life of the ski. SCS SKATE weight - 1270 gr.

CRS. - Fischer crossing skis for sportsmen - lovers. Core from the combination of Air Core and air canals in the structure of a wooden core. Volcanic basalt fibers facilitate weight and allow you to save performance. The new universal structure provides the best slide under all weather conditions. In stock Model for skate and for classics. SCR weight - 1350 gr.

SC - Skis fit for athletes - lovers. Lightweight core and sliding surface WC Pro. Special enhanced edge guarantees ski durability and excellent torsion rigidity. Special inserts on the heel skis enhance the design and increase the service life of the ski. In stock Skiing for skating, classics and combi skis. SC weight - 1380 gr.

Ls. - Fischer crossing skis for active lovers. Slitzen with a universal structure for any weather conditions. Wooden lightweight core with special air channels. In stock Models for a classic with an ocean and a mallessly hold. LS weight - 1410 gr

Sporty Crown. and SPIRIT CROWN MY STYLE - Men's and women's skiing for lovers of skiing classic style. Skis provide excellent slip, thanks to the universal sliding SIN TEC surface and a reliable holding, thanks to PREMIUM CROWN notches.