Antiphat helps with maximum efficiency fight with fogging glasses and swimming masks, so it is used both professional athletes and amateurs. This anti-recorder is a means of having the ability to interfere with the process of education unwanted for users of water surface instruments and not allowing liquid to accumulate on the inside of the lenses. The production of large companies, the protection layer is applied directly during production. The fogging coating retains its properties within a few months, after which it needs to be restored.

Products manufactured by little-known firms often do not have a protective surface, so condensate can be seen on them. In order to comfortably feel in water, the swimmers should handle the surface of the points or masks with a special means. The use of the antiphog is relevant not only for swimming facilities, but also for other optical instruments.

Composition of matter

Before sorting out how, how the remedy for glasses protects them from fogging, should carefully look at its composition. The anti components are:

Water. The protective layer is formed due to fluid molecules, which come into active interaction with the rest of the funds.
Polyurethane. This polymeric compound is obliged by its plastic and viscous properties that do not allow the drilling adhesion to become too fragile. As part of the funds there are 10-13% polyurethane in dissolved form. The material is characterized by sufficient resistance to the aggressive medium, thanks to it, the applied layer does not lose its protective qualities for a certain time.
Polyvinylpyrrolidone. This substance has found its use as both solvent and stabilizer. The water-soluble polymer is used in the production process of not only various shampoos, shower gels, but also mixtures for processing contact lenses. The material does not harm the human body: it does not cause allergic reactions and does not represent danger to the mucous membrane. Its concentration in the facility is approximately 3%.
Decile polyglucose. This ingredient is a part of a group of active chemical compounds and perfectly copes with the function of the foam. In addition, the use of this material is directly related to a decrease in the surface tension of water. The concentration of the substance in the composition of the antiphog is approximately 2%.
Methylpyrrolidone. This substance has cleansing properties and acts as a solvent. The material does not have toxic impact on the human body and does not cause irritation of the mucous meas, also well holds moisture.
Triethylamine. This material performs the function of a hardener, which allows to obtain a coating resistant to moisture.

Properties of materials

The remedy for the fogging of points has in its composition substances that possess such qualities:

reduce the forces of attraction between water molecules;
in order to protect the glasses for swimming from the adverse effects of the external environment, ensure a uniform distribution of the composition and create a protective film.

Manufacturers took into account the fact that the scope of similar solutions is located in the immediate vicinity of the mucous membrane, so they produce the compositions, as safe as possible for its body. It is extremely recommended to buy funds intended for applying automotive glass, because among their ingredients there are components that are harmful to man.

The tool is produced in the form of a gel, spray or solution. In the latter case, the bottle is usually equipped with an applicator or a dropper, which allows you to conveniently apply the composition for points on the instrument lenses. The most popular among users sprays. To achieve the desired result, the means should be applied correctly. Before applying an anti-windows on the glass, it is necessary to carefully examine the instructions attached to it.

The rules for the use of funds of various types can be somewhat different from each other, but mostly they are similar to each other. The procedure for the user is as follows:

Rinse thoroughly and degrease the inner surface of swimming points. In the process of preparation, it is necessary to remove sandbanks and other abrasive particles if they are on the lenses. Do not degrease the surface with aggressive solvents or alcohol. For this purpose, the usual means for washing dishes are suitable.
Relo glasses or a mask from water droplets by shaking, then getting rid of them with a dry napkin without a pile. Wipe the devices are not recommended. They should be dried away from direct light sources and heating devices.
On the inner surface of the lenses, apply the amount specified by the manufacturer in the anti-spoke instructions. The method of using the protective layer depends on the form of release. If the bottle is equipped with a dropper, you need to apply 1-3 drops, without touching the lenses. If it has an applicator, you need to distribute the composition on the surface of the device, gently pressed on the tube. The antipline spray is sprayed with 2-3 presses from a distance of 10-15 cm. The use of gel involves the application of a strip of 2-3 mm wide.
After the uniform distribution of the product throughout the entire inner surface of the lens cover the glasses with a napkin and leave them to be dried under natural conditions.

After completion of the drying process, the glasses can be used if they are pre-riding them under a moderate jet of cold water.

How often can I use a substance?

The frequency of use against fogging depends on several factors, including the composition and quality of the solution, compliance with the rules of its use, as well as the duration of the use of points. On average, one protective layer can effectively perform its function for several hours of swimming. In some cases it is enough for 2-3 days.

The extension of the effect contributes to the compliance of the following recommendations:

do not touch the treated lenses of your fingers;
do not wash them under a strong jet of water;
you must try not to place glasses near the heating devices, leave them under the right sunlight.

If you adhere to these simple rules, you can count on a sufficiently long-term use of the device with a solution applied to it. In some cases, when the glasses are stuffing for swimming and there is no branded means, you can completely do without it. Professional athletes are perfectly known how to do it.

Antiphog with your own hands is the usual saliva of a person, which should be smeared on the surface of the lenses immediately before using the glasses. You can process them with a children's shampoo or apply a thin layer of dry soap on the glass on both sides, and then wipe with a soft napkin. In any case, before swimming, especially in chlorinated water pools, it is necessary to take care of protecting the eyes from the effects of an aggressive environment.

Everyone loves to swim in the pool, river or sea. To get more pleasure while in water and avoid unpleasant situations, such as harmful substances and chlorine in the eyes, special swimming glasses are often used. This is simple, but at the same time an indispensable element of the equipment of each diver or swimmer.

In fact, many all kinds of types of this accessory are distributed in the world. You can enumerate the shape of glasses, colors and a variety of lenses, prices starting with budgetary and higher. But, unfortunately, after a while staying in the water, we begin to sweat goggles. What to do?

First remember why this happens. And then let's talk about what to do when the swimming glasses sweat.

Why do swimming glasses sweat?

To better navigate under the surface of the water, the human eye needs protection. It is imperative that the air layer is present in this defense. Thanks to physics, everyone knows that the air warms up faster than water. Thermal conductivity of air is higher. Therefore, after a while there is a difference between air temperature in glasses and water behind them. The air inside the eyepiece is heated using the heat of the human body. The difference in temperatures gives condensate, which becomes the cause of the fogging of the glasses.

Physics shows that this problem is not anywhere. But in practice it is solved. Consider how to handle swimming glasses so as not to swell. The main reasons for this problem are already known to us.

How to fix the situation?

What to do when the swimming glasses are fisted? Of course, those producers have long been present on the points market, lenses are used, which are covered from the inside with a special means - antiphog. It is they indicated on the packaging of the accessory. Antiporn keeps up to several months. However, neither careful attitude to his favorite glasses nor the professional coating ensures that with time the remedy that prevents the fogging of glasses does not wash off, and the glasses will not sweat again.

It is important to figure out than to process swimming glasses so as not to swell. The main reasons to do so do not just be reduced to the fact that it deprives comfort at depth. When a person satisfactorily sees under water, several goals are reached at once:

It helps the swimmer is better to navigate, for example, to see the path in the pool.
Not so scary novice to dive into depth.
It does not take away the time that can be productively used for training.
Does not harm the health of the swimmer.

Consider ways than to process swimming glasses so as not to sweat, starting with simple folk methods and to special solutions.

Folk remedies

If the glasses are fucked, then do not try to wipe the lenses with your fingers from the inside. When you need to do this, then simply substitute the lenses under cold water and rinse.

The next way and professionals enjoy, is to use saliva. Salus on the lenses inside is applied, then it is frozen on the surface and is rinsed at the end with water.

So, you are fisted with swimming glasses. What to do in this case? Help shampoo for children or shaving cream. Some use toothpaste or detergent. The drop of the selected drug is applied to the inside of the glasses, after which it is rubbed by a towel.

You can add a slightly slightly "Coca-Cola" to enhance the effect. Then the drop is easier to lose a soft toothbrush. After the procedure, the glasses are washed with water and wipe with a paper napkin. This good way is quite capable of cope with the missing lenses.

And here is another answer to the question of what to do when the glasses are fought for swimming. You can wipe the lenses from the inside with a piece of raw potatoes, lemon or apple. After that, rinse with water.

In these listed folk methods there is one but significant minus. Such protection is enough only for one workout or about an hour of swimming.

Burning

And here's another, a rather controversial method, allowing you to get an answer to the question of what to do when weave glasses for swimming. This method is suitable for only one glasses, where lenses are made of glass. Lighter will be needed here.

Glass glasses are already kalenny, it means that lenses will withstand the temperature processing. Silicone, from which points are made, also withstands 300 degrees. The lighter does not give such a temperature and there is no reason for anxiety. Glass during processing will not crack and silicone will not be melted.

The essence of the method is that the burning lighter is based on the contour of the glass from the inside glasses, covering the lens with a layer of soot. Periodically, the glasses turn over so that carbon dioxide emerged due to burning, and fresh air came.

Smoked lenses are treated with detergent (not abrasive) or "peps-cola". Use and toothpaste, which is applied to smoke in a small amount. Add barely water and everything is brushed with a soft toothbrush.

Important! After cleaning the soot with lenses, it is necessary to thoroughly rinse with water points. The unlucky remnants of the toothpaste will lead to the effect of burning eyes under water.

At the end of the procedure it is necessary to wipe the lenses with paper napkins. Upon proper washing, the napkins will not slide on the glass.

Antiph

Do you smear swimming glasses? What to do? How to fix the situation? It is best to use antiph. This is a special means - liquid, spray or gel used to eliminate the fogging of points. Antiph is sold in small tanks. But this volume is enough for use for a long time. If the tool is produced in the bottle, then at the end there is an applicator or dropper, helping to apply the composition on the lenses.

The composition includes substances that:

Associate the uniform distribution of the composition and create a protective film.
Reduce the strength of attraction between water molecules.

An individual instruction is attached to each tool. This is due to different chemical components available in the composition.

What is inside the antiphog?

The means to combat fogging has a complex chemical composition. This includes:

Water. Due to water molecules, the remaining components of the means occurs.
Polyurethane. Gives plasticity and viscosity, so the glue does not become too fragile.
Polyvinylpyrrolidone. This component also acts as a solvent, and as a stabilizer. It does not harm health, not allergenic and does not threaten the mucous membrane of the eye.
Triethylamine. The role of the component: a hardener forms a coating resistant to moisture.
Decile polyglucose. Acts as a foam eagle. Also reduces the surface tension of water.
Methylpyrrolidone. The role is cleansing properties and as a solvent. Like the polyvinylpyrrolidone, there is no toxic effect on the body and does not irritate the mucous membranes. Moisture-resistant.

Obviously, it is impossible to create this mixture.

Properties and use of antiphog

Taking into account the fact that the applied antiph is located in the proximity to the mucous membrane, the composition is safe for the human body. Do not confuse it with means for applying for automotive glasses. Since the automotive equipment includes chemicals who can harm human. Do you have a swimming glasses? What to do in this case? You can use one of the ways described above. But what exactly should not be done, it is not specialized to be applied to lenses.

Consider the basic similarities of the use of anti-foot:

Lenses should be rinsed thoroughly and degreased so as not to leave the grains or other abrasives. Aggressive solvents or alcohol are not suitable for degreasing. It is better to take the detergent.
Water drops remove by shaking, after wing with a paper napkin without a pile.
The selected means is applied to the inside of the lens in accordance with the instruction. If the bottle is with a dropper, then it should, without touching the lenses, apply 2-3 drops. If with the applicator, gently pressing the tube to distribute the substance along the surface of the lenses. The spray is applied with two three presses from a distance of 10 cm. Gel - stripes, 1-2 mm wide.
After applying the tool, cover points, for example, a napkin and leave dry at room temperature.

After drying, rinse the glasses with cold water.

What is the better way?

When choosing a suitable method, some factors should be taken into account. Among them is the composition, quality of the solution, the processing method and the use of points. It is important to remember that one processing can perform its function within a few hours, and the other is a couple of days. Everyone decides to do what to do when they are fought for swimming glasses, but the solution to this problem is a guarantee of a comfortable pastime.

Points are different - for the image, for vision, for swimming. Despite the fact that they all perform different functions, they have something in common. What exactly? Glass! And alas, they often faded. What to do in such situations and how to prevent fogging?

Pleet glasses: why and what to do?

If you wear this accessory at least sometimes, you probably know this problem. Condensate appears on the glasses in the most inappropriate moments - on the street, in training, indoors. As a result, you have to shoot them and wipe that it is not always convenient. Is it possible to prevent fogging?

Most often, the glass sweat due to the jump of temperatures: for example, when you went out of the street or less warm rooms in a warmer.Fortunately, today the problem is solved very simply - you only need to cover the surface of glasses with hydrophilic coating. The cost of such a coating is not the lowest, but why not fork and not get rid of the problem? In optics stores, you can find lenses with such a coating, they will get rid of you from the problem of fogging forever.

If you sweat glasses what to do? If you do not have enough money for hydrophilic coating, we recommend getting a special napkins, you can be ordered in many online stores.

The above two options are the most effective, as practice shows. We also tell about more budget versions, but they work not as good as I would like:

Using soap. You will need the most ordinary soap, moisten it with water and wash your fingers, then spend them all over the perimeter of glasses from both sides. Despise and wipe.

Glycerol. We take a small soft cloth and dripping a few drops of glycerol on it. Wipe with a moistened cloth glasses on both sides. Let them dry, after 10 minutes we wipe the glass with a dry soft cloth.

Shaving cream. Lubricate the pillows of the fingers with a small amount of shaving cream, process the glass, let me dry and wipe the soft cloth.

Shampoo. We mix 20 ml of shampoo and the same amount of water. Moisten a piece of fabric in solution and wipe the lenses on both sides, then wipe them with a dry cloth.

Anti-recorder for cars. Despite the fact that the tool works quickly and efficiently, it also has cons. Please note that it contains aggressive substances that can damage the skin and mucous membranes, so it is not recommended for points.

The above methods are less effective and, moreover, such a processing of lenses will take a lot of time. But only you choose - to upset for a special covering or worry every day with wiping glycerol or soap.

If swimming glasses are sweating: what to do?

Those who visit the pool, for sure at least once come across the fogging of lenses on swimming glasses. Because of this, you have difficulty visibility, and in the water to shoot and wipe the glass is not convenient.

If swimming goggles sweat, use the following ways to solve the problem:

Buying a new accessory with light glasses . Even the highest quality glasses with a coating eventually begin to fog in half a year or a year. The optimal option is to buy a new accessory, choose the option with light glasses.

Means "anti-fog", Prevents condensate formation for several weeks. Use the tool must be in accordance with the instructions, do not exceed the dosage. Such means can be found in the form of spray, as well as wipes.

Rinse with water . Despite the simplicity, the way it really helps to clean the lenses. But consider that after half an hour, the problem will again give yourself to know.

Saliva. And it's not a joke! This technique is used even professional athletes. We apply a little saliva on the inner part of the lenses and wipe the fingers, then rinse them with cool water.

Tooth mint paste. Apply a little paste on the lens from the inside and wipe the glass with your fingers, then wipe them with a dry soft cloth or a towel.

We hope you will help our tips on cleansing glasses from condensate. Alas, but an accessory for swimming even from the best brands will still fogging, so you can hardly find a panacea.

They are an important part of the equipment necessary for training athletes, diving, underwater hunting or recreation on the river, sea or a reservoir. Thanks to eyes, the eyes are protected from water, which can contain salt or chlorine. Another feature of the points is to ensure excellent visibility under water, which allows the swimmers to feel comfortable in the pool, and divers - in the depths of water spaces.

However, what if you are fought for swimming glasses? Poverty lenses do not allow anything to consider, and this contributes to the loss of orientation during training, competitions or underwater hunting and can lead to certain problems. As a result, this important accessory becomes completely useless, capable of even harming a person who stopped seeing the situation at a depth.

Find the answer to the question why sweat glasses swim quite easily. The thing is that the temperature inside the accessory is higher than the outside, as a result of the condensate, accumulating on the inside of the glass. It is this condensation that creates this problem that arises with any glasses models.

Means for fighting fogging

What to do when swimming glasses sweat? The optimal option is to use a special fluid (), which it is necessary to process the inside of the accessory. Such a liquid today most often can be borrowed in the cans. In addition, it also comes applied to the napkin. The protective layer applied to the lens will serve a certain time, after which it needs to be updated so that the swimming points do not sweat. Among the shortcomings of such a fund, we note it is not the most affordable price. On the other hand, when stamps for swimming, you can not find a more efficient solution to solving a problem than antiph.

Apply a special coating is necessary for a uniform layer on the dry and clean surface of the glass. It is done only on the inside of the lenses. After that, the glasses are wiped with cloth and rinsed in cool water. If you want the applied coating as long as possible, then you should not touch the inner sides of the glasses and wipe the glass from the inside. In addition, the accessory should not be exposed to very high temperatures, for example, due to sun rays or hot water. We also note that after sailing it is necessary to rinse the product in cold water.

Anti-foot protection can be stored during several pool visits and even longer if you follow all instructions for use that are on the packaging of each specific means (must be familiar with them).

Other fogging methods

So that swimming points do not sweat, you can use not only expensive special fluids, but also quite affordable means. For example, many swimmers are catching saliva on the inner part of the lenses and smear it with their fingers over the entire surface, after which the glasses are washed with water. Such protection may well be enough for one occupation in the pool. Also to protect some choose shampoo, toothpaste, shaving cream and other similar compositions. With these means it is necessary to lubricate the inside of the glass to obtain the desired effect.

Do you like to swim, but the glasses constantly interfere with you - stuff, fly and paste water? Next time you need to prepare them in advance for swimming. Here you will learn how to do it.

How to pick up glasses for swimming?

The first thing to do is to choose points for your face form. Point bridges and adjustable straps help lenses to face tightly, creating a suction effect. Due to this, water can not penetrate the glasses.

The bridge of glasses is three species:

Adjustable - with them you can change the inter-vicious distance using a stepped mechanism.
Replaceable - several bridges of different sizes are attached to the points.
Soft unregulated - are part of the lenses rims along with the strap.

The most reliable are glasses with an unregulated bridge, but they need to select them especially carefully - you cannot change the inter-vicious distance.

Posted about glasses? Now learn to wear them, placing the straps at an angle of about 45 ° to the scalp. Enchanting in this position, the points will not crawl while swimming.

Attention: Do not tighten the straps too tight, it can cause discomfort, and after the dressing you will find the circles under the eyes.

If, despite all the measures taken, the glasses continue to behave, as they do. It will reliably hold the straps on the ground.

Potted glasses?

Perhaps this is the main problem of all swimmers. What to do?

To begin with, remember what you can not do. If the glasses are fucked, do not rub the lenses with your hands, cloth, and so on. On the glasses there is an anti-recovery coating (antipline), which you thus destroy! If the fog in the eyes is no longer possible, just remove the glasses and lower them into the water. You get rid of the problem in seconds.

Over time, after a few months of use, antipal from the glasses will wash, but you can restore it with. It must be applied to the clean and dry inner surface of the lenses, wipe the glasses dry and rinse with cool water. The effect is enough for several training.

Another not - do not allow direct sunlight points and keep them away from heat sources.

After each training, rinse with cold water glasses.

Remember: Even with the worst handling itself, swimming points once wear out and lose their properties. Therefore, if the glasses prevent you from swimming, just replace them! After all, the sport should be like pleasure.